Optimus VSX-2000OP-SW User manual

Revision Sheet

SX/VX-2000 Operational Software User Manual Page i

TOA

[SX / VX-2000 Software User Manual]

Revision Sheet

SX/VX-2000 Operational Software User Manual Page ii

Revision History

Version

Date Revision Description

1.0 December 4, 2012 Template Creation

1.1 February 4, 2013 Revision on GUI

Page 1

Table of Contents

Contents

Revision History.......................................................................................................................... ii

Table of Contents

....................................................................................................................... 1

1. Server Operation Guide ................................................................................................... 3

1.1. Login as administrator ............................................................................................... 3

1.2. Add Map Tab ............................................................................................................. 4

1.3. Edit Map Tab ............................................................................................................... 5

1.4. Inserting Map Elements ............................................................................................. 7

1.4.1. Importing Image .................................................................................................................. 7

1.4.2. Inserting Zone ....................................................................................................................... 9

1.4.3. Inserting Switch .................................................................................................................. 11

1.4.4. Inserting Text ....................................................................................................................... 15

1.4.5. Inserting Remote Mic ........................................................................................................ 17

1.4.6. Inserting Speaker Icon ...................................................................................................... 19

1.4.7. Inserting Control Status ..................................................................................................... 21

1.4.8. Inserting Fire Icon ............................................................................................................... 25

1.4.9. Inserting Status Bar............................................................................................................. 26

1.5. Scheduler ................................................................................................................. 29

1.5.1. Add New Schedule ........................................................................................................... 29

1.5.2. Edit Schedule ..................................................................................................................... 32

1.5.3. Delete/Delete All Schedule ............................................................................................. 34

1.5.4. Stop Schedule .................................................................................................................... 34

1.6. Change Volume ...................................................................................................... 35

1.7. Time Synchronization ............................................................................................... 36

1.8. Client PC Registration .............................................................................................. 37

1.9. Body Name .............................................................................................................. 40

1.10. Device Configuration ........................................................................................... 41

1.11. Change Password ................................................................................................ 43

2.

Client Operation Manual

................................................................................................... 45

2.1. Audio Streaming ...................................................................................................... 45

2.2. Map Monitoring ........................................................................................................ 45

2.3. CI / CO / Slot Control on Map ................................................................................ 46

2.4. Monitor/Save Log ..................................................................................................... 46

SX / VX-2000 Software User Manual November 21, 2014

SX/VX-2000 Operational Software User Manual Page 2

2.5. Monitor Zone Status ................................................................................................. 48

2.6. Monitor Control I/O Status ....................................................................................... 48

2.7. Monitor Schedule ..................................................................................................... 49

2.8. Monitor Hardware Status using Status Bar .............................................................. 50

SX / VX-2000 Software User Manual November 21, 2014

SX/VX-2000 Operational Software User Manual Page 3

1. Server Operation Guide

1.1. Login as administrator

To use the features of administrator, you need to log in

using Server PC.

Steps:

1. Click “File” on the menu bar

2. Click “Login”

3. Enter the password

4. Click “OK”

5. Click “Update Map” to save the map

Figure 1. Login Menu Bar

SX / VX-2000 Software User Manual November 21, 2014

SX/VX-2000 Operational Software User Manual Page 4

Figure 2. Login Dialog Window

1.2. Add Map Tab

You can add up to 8 map tabs to the display.

Steps:

1. Click “File” on the menu bar

2. Click “Map”

3. Click “New Map”

4. Enter the name for the new map tab.

5. Click “OK”

Figure 3. New Map Menu Bar

SX / VX-2000 Software User Manual November 21, 2014

SX/VX-2000 Operational Software User Manual Page 5

Figure 4. Create Map Dialog Window

Figure 5. New Map Inserted

1.3. Edit Map Tab

The name and the order of the Map Tab can be edited.

Steps to change the name of the Map Tab:

1. Click “File” on the menu bar

2. Click “Map”

3. Click “Edit Map”

4. Double click on the name of tab to be edited

5. Enter the new name

6. Click “OK”

SX / VX-2000 Software User Manual November 21, 2014

SX/VX-2000 Operational Software User Manual Page 6

Steps to change the order of the Map Tab:

1. Click the Tab to be reordered

2. Press “Up” or “Down” to change the order

3. Click “OK”

Steps to delete the Map Tab:

1. Click the Tab to be deleted

2. Press “Delete”

3. Click “OK”

Figure 6. Edit Map Menu Bar

SX / VX-2000 Software User Manual November 21, 2014

SX/VX-2000 Operational Software User Manual Page 7

Figure 7. Edit Map Dialog Window

1.4. Inserting Map Elements

1.4.1. Importing Image

Several images can be inserted into the map tabs.

The supported image formats are BMP, GIF, JPEG,

PNG, and TIFF.

Steps to change the name of the Map Tab:

1. Click “File” on the menu bar

2. Click “Import Image”

3. Select the image file to be imported

4. Click “OK”

SX / VX-2000 Software User Manual November 21, 2014

SX/VX-2000 Operational Software User Manual Page 8

Figure 8. Import Image Menu Bar

Figure 9. Image File Dialog Window

SX / VX-2000 Software User Manual November 21, 2014

SX/VX-2000 Operational Software User Manual Page 9

Figure 10. New Image Inserted

1.4.2. Inserting Zone

Zone is used to monitor the system’s sound output.

There are 4 shapes that can be used.

Steps to insert zone to the map:

1. Click “File” on the menu bar

2. Click “Insert Zone”

3. Click on the shape wanted

4. Insert the Text to be displayed by the zone

5. Select the Font Size of the text

6. Select the color of the text

7. Select the color of the zone when idle

8. Select the color of the zone when active

9. Select how the color of the zone will change when

active

10. Select the zone to be assigned to the zone.

11. Click “OK”

SX / VX-2000 Software User Manual November 21, 2014

SX/VX-2000 Operational Software User Manual Page 10

Figure 11. Insert Zone Menu Bar

Figure 12. Zone Setting Dialog Window

SX / VX-2000 Software User Manual November 21, 2014

SX/VX-2000 Operational Software User Manual Page 11

Figure 13. New Zone Inserted

1.4.3. Inserting Switch

Switch is used to monitor and control the system.

There are 3 types of switch.

1. Control Input Switch: triggers the Control Input

2. Control Output Switch: triggers the Control Output

3. Talk Switch: trigger the server to play sound from

mic.

Steps to insert switch to the map:

1. Click “File” on the menu bar

2. Click “Insert Switch”

3. Click on the switch type wanted

4. Insert the Text to be displayed by the switch

5. Select the Font Size of the text

6. Select the contact input / contact output number

to be assigned to the switch.

7. Select the type of the switch. Pulse Switch will

activate the switch for 1 second and then

deactivate the switch automatically, while Level

Switch stays.

8. Select the color of the text

SX / VX-2000 Software User Manual November 21, 2014

SX/VX-2000 Operational Software User Manual Page 12

9. Select the color of the zone when the switch is Off

10. Select the color of the zone when the switch is On

11. Select how the color of the switch will change

when On

12. Click “OK”

For Talk Switch, there are no options to change.

Figure 14. Insert Switch Menu Bar

SX / VX-2000 Software User Manual November 21, 2014

SX/VX-2000 Operational Software User Manual Page 13

Figure 15. Create Switch Control Input Dialog Window

SX / VX-2000 Software User Manual November 21, 2014

SX/VX-2000 Operational Software User Manual Page 14

Figure 16. Create Switch Control Output Dialog Window

SX / VX-2000 Software User Manual November 21, 2014

SX/VX-2000 Operational Software User Manual Page 15

Figure 17. New Switch Inserted

1.4.4. Inserting Text

Steps to insert Text to the map:

1. Click “File” on the menu bar

2. Click “Insert Text”

3. Insert the text to be displayed

4. Select the font size

5. Select the color of the text

6. Click “OK”

SX / VX-2000 Software User Manual November 21, 2014

SX/VX-2000 Operational Software User Manual Page 16

Figure 18. Insert Text Menu Bar

Figure 19. Text Setting Dialog Window

SX / VX-2000 Software User Manual November 21, 2014

SX/VX-2000 Operational Software User Manual Page 17

Figure 20. New Text Inserted

1.4.5. Inserting Remote Mic

Remote mic is used to monitor the Remote Mic status.

Steps to insert Remote Mic to the map:

1. Click “File” on the menu bar

2. Click “Insert Remote Mic”

3. Click RM Address

4. Select the color when normal

5. Select the color when general paging

6. Select how the color will change when general

paging

7. Assign the RM Address represented

8. Click “OK”

SX / VX-2000 Software User Manual November 21, 2014

SX/VX-2000 Operational Software User Manual Page 18

Figure 21. Insert Remote Mic Menu Bar

Figure 22. Remote Microphone Dialog Window

Page is loading ...

Optimus VSX-2000OP-SW User manual

Other documents