How to Update the Firmware of AGRAS MG-1S Remote Controller
http://www.dji.com/mg-1s
Copyright © 2017 DJI All Rights Reserved.
1. Visit the official DJI website and go to the MG-1S page, download the latest firmware package.
2. Extract the firmware package, and copy the extracted file (AG405_FW_xxx_USER.bin) to the root
directory of a Micro SD card.
3. Insert the Micro SD card into the Micro SD card slot of the Remote Controller.
4. Power on the Remote Controller, enter > Settings
>
Update, click > Local Update on the
top-right corner. The latest firmware will show on Micro SD card. Click Local Update to start
updating.
Notes:
DO NOT insert the Micro SD card to a card reader and use the USB port of the Remote Controller to
update.
-
1
dji MG-1S User guide
- Type
- User guide
- This manual is also suitable for
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI