2. ESL VISION
  3. ERHB
ERHB

ESL VISION ERHB Installation guide

  • I have analyzed the provided installation guide for the ECONOMY ROUND HIGH BAY SERIES ERHB . This document details instructions for different mounting options, including hook, trunnion and conduit mounts. There are also safety warnings and a wiring diagram. I'm ready to answer any questions you might have about device installation or its features.
  • Who should perform the installation?
    What should you do before starting any installation, maintenance, or removal?
    What should you do if there is a problem with the fixture?
ECONOMY ROUND HIGH BAY SERIES
ERHB — Installation Guide Page 1 of 1
Copyright © 2022 ESL Vision, LLC. All rights reserved. Rev: 08/30/22
Conduit Mount Installation
Trunnion Mount Installation
(sold separately)
(sold separately)
Hook Mount Installation
2Attach supplied safety cable to
fixture and secure to ceiling or
other overhead structure. 4 Wire the fixture per Diagram 1.
3Feed the power cable through
the hole in the conduit mount
and then into the conduit. Secure
conduit to fixture tightly.
1Secure spring washer around base
of conduit mount. Screw conduit
mount into top of fixture.
3Secure fixture to trunnion mount
with supplied bolts and set screws.2Slide fixture into the trunnion
and align the holes of the fixture
and mount.
1Attach trunnion mount to ceiling
or other overhead structure with
screws or bolts (not supplied). 4Attach supplied safety cable
to fixture and secure. Wire the
fixture per Diagram 1.
2Attach the supplied safety cable
to the fixture and secure it to
the ceiling or overhead structure. 4Install supplied set screw into
hook mount to secure chain.
Wire the fixture as per Diagram 1.
3Attach fixture assembly to eye
bolt, chain in ceiling or other
overhead structure.
1Secure spring washer around base
of hook mount. Screw hook mount
into top of fixture.
WARNING
1. To avoid electric shock, disconnect power at service source prior to installation.
2. The installation should be performed by qualified electricians or lighting technicians.
3. Before conducting any installation, maintenance, or removal, disable all power.
4. Do not touch any part of the fixture while it is powered up and in service.
5. If there is any problem with the fixture, turn o power and DO NOT attempt repair
unless you are a qualified electrician, technician or customer service member.
Wiring Diagram
Pink (Dim-)
Yellow (DC 12V)
Purple (Dim+)
Black (Line)
White (Neutral)
Green (Ground)
/