Arcora AR6204350 User manual

Brand: Arcora

Model: AR6204350

Category: Sanitary ware

Type: User manual

Arcora AR6204350 is a two-handle lavatory faucet with a maximum handle rotation angle of 90 degrees. It features a double lever style handle, a 1.2 gpm aerator, and complies with California water efficiency regulations and Proposition 65. The faucet is easy to install and comes with all necessary mounting hardware.

Ø1"(25)

(100mm)

Pre drilled hole size :

1.26" to 1.5"(32mm to 38mm)

Hole Size

Unsuitable sink size：

1"(25mm)

Hole Size

1.26" to 1.5"

(32mm to 38mm)

Hole Size

4"-16"

(100-400mm)

OPERATION

• Double levers style handles

• Maximum handle(s) rotation angle is 90˚ to full on

• Rotate hot side counter clockwise to open (clockwise to close)

• Rotate cold side clockwise to open (counter clockwise to close)

TWO HANDLE LAVATORY

CENTERSET FAUCETS

You may need

With 1.2 gpm are compliant with

California water effi ciency regulations,

Complies with California Proposition

65 and with the Federal Safe Drinking Water Act.

In areas with extremely low water pressure causing

the basin faucet water flow to be unsatisfactory ,

replace the 2.2 gpm aerator to improve the water flow in the basin faucet.

3x1.26" to 1.5"

(32mm to 38mm)

Hole Size

(120mm)

4.7"

(191mm)

7.5"

(113mm)

4.4"

1.2(30mm) "

Max. deck

Thickness

3x Ø2

(Ø52 mm)

2.7"

(68mm)

Hot

6"to16"

(152mm to 406mm)

11"to21"

(280mm to 535mm)

3/8“ :"(\"

Cleaning and Care

Care should be given to the cleaning of this product. Although its finish is

extremely durable,

It can be damaged by harsh abrasives or polish. To clean, simply wipe gently

with a damp cloth and blot dry with a soft towel.

To READ ALL the instructions completely before beginning.

For easy installation of your faucet you will need:

To READ ALL warnings, care, and maintenance information.

washer

1.2gpm aeratot

aeratot house

1.2GPM 4.5L/min

M14mm

1 1/4''

(Ø32mm)

9.5"(240mm)

8.7"(220mm)

Ø2.2"

(55mm)

Min. 1.6"

(Ø41mm)

Hole Dia

1.1" to

2.5"

(28 to

64mm)

Align tabs and tabs on quick

connects .

Push quick connects firmly upward

and snap onto receiving tube tab .

Pull down moderately to ensure each

connection has been made.

1.Remove the washer (2) , black

gasket (4) and nut (5) from the

assembly.

2.Slide washer (2) up to underside

of flange (3).

Insert flange (3) and washer (2) into

sink and secure with the black

gasket (4) washer and nut (5) from

underneath the sink.

3.Put down and check the

Springloaded stopper (1).

4. Connect assembly to drain.

To flush debris from the plumbing

system:

1.Remove the aerator by hand.

2.Run hot and cold water for

one minute.

3.Replace the aerator.

Repeat for other hose connection

making sure the hose with the hot

label is connected to the hot supply

valve and the other

hose is connected to the cold supply

valve.

FLUSH SYSTEM/CHECK FOR LEAKS.

Turn on hot and cold water supplies

and flush water lines for one minute.

Check all connections at arrows for

leaks.

Retighten if necessary, but do not

overtighten.

NOT WITH apply teflon tape to

the quick connect installation.

Before installing the valves, clean the

water pipe thoroughly to avoid dirt

and deposits.

Remove the brass lock nut from

the thread rod counter-clockwise,

remove the washer and washer.

Install spout (1) O-ring (2) , Secure

with washer and nut (3).

Note: If sink is uneven, use silicone

under the gasket.

1.Make sure attach the gasket to the

base of hot (1) and cold (2) end valves.

2.Slide hot (1) and cold (2) end valves

with ﬂexible hoses (3) through sink.

3.Place washer(4) and metal plate(5)

over mountingstud under sink. Secure

with mounting nut(6).

4.Lock mounting nut(6) into position by

tightening

screw (7).

Notes

3 4

Arcora AR6204350 User manual

Brand: Arcora

Model: AR6204350

Category: Sanitary ware

Type: User manual

Download PDF

report

Arcora AR6204350 User manual

Arcora AR6204350 User manual

Related papers

Other documents