Arcora AR6101800B User manual

Brand
Arcora
Model
AR6101800B
Category
Sanitary ware
Type
User manual
OPERATION
• Double levers style handles
• Maximum handle(s) rotation angle is 90˚ to full on
• Rotate hot side counter clockwise to open (clockwise to close)
• Rotate cold side clockwise to open (counter clockwise to close)
24"(600mm)
9/16"
G1/2
Ø1"(25)
4"
(100mm)
Unsuitable sink size：
1"(25mm)
Hole Size
TWO HANDLE LAVATORY
CENTERSET FAUCETS
You may need
With 1.2 gpm are compliant with
California water effi ciency regulations,
Complies with California Proposition
65 and with the Federal Safe Drinking Water Act.
In areas with extremely low water pressure causing
the basin faucet water flow to be unsatisfactory ,
replace the 2.2 gpm aerator to improve the water flow in the basin faucet.
Cleaning and Care
Care should be given to the cleaning of this product. Although its finish is
extremely durable,
It can be damaged by harsh abrasives or polish. To clean, simply wipe gently
with a damp cloth and blot dry with a soft towel.
To READ ALL the instructions completely before beginning.
For easy installation of your faucet you will need:
To READ ALL warnings, care, and maintenance information.
1.2GPM 4.5L/min
Maintenance
If faucet exhibits very low flow:
A. Remove and clean aerator (2) with hand,
B. Shut off water supply valves.
Replace valve assembly (4).
When reinstalling parts, make sure bonnet
nut (5) is tightened securely with a wrench.
If faucet leaks from under handle:
Using a wrench, ensure bonnet nut
(5) is tight.
If leak persists:
Shut off water supply valves.Replace valve assembly (4).
When reinstalling parts, make sure bonnet nut (5)is tightened
securely with a wrench.
If faucet leaks from spout outlet:
Shut off water supply valves.
Replace valve assembly (4).
When reinstalling parts, make sure bonnet nut (5) is tightened
securely with a wrench.
Install valve assembly (4) correctly for proper handle rotation.
unit:inch(mm)
6"
(156mm)
3
2
1
8
6
7
9
5
4
4.9"
(125mm)
8"
(205mm)
4.7"
(120mm)
9"
(231mm)
2.7"
(69mm)
2.2"
(56mm)
0.2" (6mm) Min. Deck Thickness
1.2"(30mm) Max. deck Thickness
2x1" to 1.5"
(25mm to 38mm)
Hole Size
4"centers
(102mm)
0.9"
(23mm)
2"
(50mm)
Min. 1.2"(32mm)
clearance to back
splash
Hot Cold
2xG1 /2
1 1/4''
(Ø32mm)
9.5"(240mm)
8.7"(220mm)
Ø2.2"
(55mm)
Min. 1.6"
(Ø41mm)
Hole Dia
1.1" to
2.5"
(28 to
64mm)
2
1
3
Attach supply lines .
Do not overtighten.
Turn water back on.
1
3
Provided with necessary models.
Attach the mounting nut to the
hot and cold threaded mounting
shanks and tighten faucet to
basin.
2
Cold
Hot
Before installing the valves,
clean the water pipe thoroughly
to avoid dirt and deposits.
1
Notes
OPTION: Use silicone under the
base if deck is uneven.
1.Remove the washer (2) , black
gasket (4) and nut (5) from the
assembly.
2.Slide washer (2) up to underside
of flange (3).
Insert flange (3) and washer (2)
into sink and secure with the black
gasket (4) washer and nut (5) from
underneath the sink.
3.Put down and check the
Spring loaded stopper (1).
4. Connect assembly to drain.
1
2
3
4
5
To flush debris from the plumbing
system:
1.Remove the aerator by hand.
2.Run hot and cold water for
one minute.
3.Replace the aerator.
Repeat for other hose connection
making sure the hose with the hot
label is connected to the hot supply
valve and the other
hose is connected to the cold supply
valve.
FLUSH SYSTEM/CHECK FOR LEAKS.
Turn on hot and cold water supplies
and flush water lines for one minute.
Check all connections at arrows for
leaks.
Retighten if necessary, but do not
overtighten.
4
56
  • Page 1 1
  • Page 2 2

Arcora AR6101800B User manual

Brand
Arcora
Model
AR6101800B
Category
Sanitary ware
Type
User manual
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents