2. ITC
  3. 69301-KK

ITC 69301-KK User manual

  • I have reviewed the installation instructions for the ITC Baitwell Light 69301-KK. This document details the necessary steps for installing the light, including preparing the mounting hole and making the electrical connections and sealing. I am ready to answer your questions about the installation process or the product's specifications.
  • What is the operating voltage of the light?
    What is the current draw of the light?
    What size hole is required for mounting?
    Is a fuse recommended for the power connection?
3030 Corporate Grove Dr.
Hudsonville, MI 49426
Phone: 616.396.1355
itc-us.com
1. Determine the installation location and drill a 3/4”
hole. Smooth the hole.
2. Using the wiring diagrams below, wire the light to
the incoming 12V DC power. Test the light.
3. Feed the wires back through the hole and push the light into the mounting surface. Use application specific
sealant around the light to prevent any ingress of water. Tighten the nut on back to hold it in place.
IMPORTANT SAFETY INSTRUCTIONS. READ CAREFULLY FOR YOUR PROTECTION AND SAVE ALL IN-
STRUCTIONS.
• Disconnect power before installing, adding or changing any component.
• To avoid a hazard to children, account for all parts and destroy all packing materials.
• It is recommended that fuse protection be added to the positive(+) input.
• Technical Specs:
Voltage: 10 - 14V DC | Current: 0.03A
Black (-)
12V DC (+)
Black (-)
Red (+)
Incoming
12V DC
Power
Baitwell
Light
Fuse
PARTS/TOOLS NEEDED:
Baitwell Light Butt Splice Connectors
(Not Provided) Power Drill Application Specific Sealant
(not provided)
INSTALLATION INSTRUCTIONS
Baitwell Light
Part#: 69301-KK
For warranty information please visit www.itc-us.com/warranty-return-policy
DOC #: 710-00192 • Rev A • 07/07/21
Page 1 of 1
/