Anjielo Smart EN-7-inch Central Control Panel Owner's manual

Kind tips!

For your better use of this product, please

read this instruction carefully before use

user manual

Thank you for choosing ANJIELO SMART home control panel background music host. This

product is not only a smart home operation control panel, but also a family background music host.

All products of our company have been strictly tested before leaving the factory, and we abide by

the quality commitment. Please use it with confidence. In order to facilitate your installation,

commissioning and use of this product, please read this manual carefully before installation and

commissioning, and operate in strict accordance with relevant regulations

Table of contents

1. Product introduction

2. Product function introduction

3. Product home page introduction

4. Device interface introduction

5. Introduction to scene interface

6. Group Interface Introduction

7. entertainment interface introduction

8. Introduction to Bluetooth

1. Product description

www.anjielo.com

1

www.anjielo.com

2

3

www.anjielo.com

Packing list: a manual, 4PCS screws, a mounting bracket

You can view the product introduction in the following ways

1. Product introduction

1 bottom box (default standard)

4

External interface description

1.TF card: plug in an external TF card.

2. MICROUSB: external U disk; upgrade

3. Power button: Long press to power on/off/restart, short press to lock screen/

unlock

4. Built-in 2W small speaker.

5. Wired network.

6. Power terminal: connect to AC220V power supply.

7. 485 interface: Connect 485A+485B to control the background music through

external equipment. You can also control other 485 devices through this host

8. Trigger playback: connect to GND+ON to trigger playback of music

9. Trigger the doorbell: connect to GND+DB to trigger the doorbell

10. Audio input line: audio line (three-core shielded line: commonly known as

microphone line), RVVP2X0.5, RVVP2X0.75, connected to AUXL+AUXR+GND. External

audio input.

11. Audio output: Audio cable (three-core shielded cable: commonly known as

microphone cable), RVVP2X0.5, RVVP2X0.75, connected to OUTR+OUTL+GND, can be

connected to other power amplifiers.

12. Speaker: speaker cable (200 cores), RVH2X100, RVH2X200 connected to SPKL+

SPKL-, the speaker is less than 30W.

13. Speaker: speaker cable (200 cores), RVH2X100, RVH2X200 connected to SPKL+

SPKL-, the speaker is less than 30W.

14. Microphone: for voice pickup.

15. Knob: According to the software design, the lighting, air conditioning, curtains,

volume, etc. can be adjusted.

www.anjielo.com

5

3. Tighten the wires in the 86 cassette to the corresponding function of the main unit, then

insert the wiring sub into the terminal of the main unit, then put the main unit into the

1. 86 bottom boxes are provided by the pre-embedded company, and the depth of the

Installation Notes

bottom box is 57MM.

2. Tighten the bracket on the 86 cassette with bracket screws. (As shown in Figure 1)

hardware bracket, and then push it down. (As shown in Figure 2)

Smart Host Details

1. This host is connected to Tuya Smart Home. You can scan the code to bind this host through the

Tuya APP. After the binding is successful, you can control Tuya Smart Home

2. Cortex1.5GHZ quad-core CPU, 7-inch multi-touch capacitive screen, 1024*600IPS high-

definition resolution display; host system: Android 8.1 system;

3. Support mobile APP to control music and read text;

4. Support mobile APP to adjust the volume

6. Support mobile phone APP to control music, stories, and manage host-related APPs

7. Support the pairing of external Bluetooth devices such as mobile phones to realize audio

playback, and can control the playback of music from external Bluetooth devices in two directions,

and can set Bluetooth to be turned on or off;

8. Support background switching function

9. Support screen saver customization function

10. Support scene music one-key play function

11. Support multi-segment timing to play music; set the time arbitrarily, and you can choose to

start and play the specified song at regular time;

12. Support the function of restarting the host at regular time;

13. Support all kinds of Android software installation;

14. Support external devices to control the machine through 485;

15. Support audio input function;

16. Support audio output function;

17. Support TF card and MICRO2.0USB interface, USB can be connected to external hard disk; 18.

Support TF card firmware upgrade;

19. Support OTA online upgrade''

20.Built-in WIFI wireless connection, which can support external input control and output control

of external smart devices

2. Product function introduction

www.anjielo.com

6

3. Product main interface introduction

1. Homepage: music player, lighting control, scene, users can customize, edit and add

according to common functions

4. Introduction to the first interface of the device

1. The device connects to wifi first,Click on the device, a QR code will pop up, use th

e Tuya mobile APP to scan the code and bind, and you can get the data of the

mobile device

www.anjielo.com

7

5.1. Scene: Manually click to execute the scene, and click the arrow to edit the scene

interface

5. Introduction to the first interface of the scene

www.anjielo.com

8

5.2Scene edit:

3.1 Scene name: can be customized and modified

3.2 The name can be customized according to the needs of the scene: such as home m

ode, it can be added as: home scene, away from home mode, can be added as: away ho

me scene

www.anjielo.com

9

Scene music: When the scene is executed, the music is play

ed in linkage, click to select a local song Scene picture: Sele

ct a different scene picture according to the scene

Timing on: After setting the time, the scene will be automa

tically executed at that time

6. Introduction to the main interface of the group

1. Group introduction: synchronous mobile phone group function, which can control

multiple types of devices at the same time

7. Introduction to the group header interface

1. Entertainment introduction: host setting function and background music function

www.anjielo.com

1

2. Navigation bar function: host touch control, including (screen brightness, volume

Mobile phone control: the APP installed on the host supports playing music,

including (drawing, volume, host functions, smart home Tuya equipment, see Tuya

transmission protocol commands for details)

Online Music: Click to open the online music player.

Sound effect adjustment: adjust the host sound effect

Host-related function setting screen display: adjust screen brightness

Bluetooth playback: use the mobile phone Bluetooth to connect to the host, click to

switch the Bluetooth playback mode

AUX icon: Turn on external audio output.

Local music source: Click to open the local music player

Local player: as shown below

adjustment, internal and external speakers, AUX, host settings)

0

www.anjielo.com

1

Back to home page: return to the main interface

1

www.anjielo.com

Brightness adjustment: adjust the brightness of the screen

Volume adjustment: adjust the host volume

External speaker: You can switch the host with its own speaker or an external large

speaker through the button; Built-in speaker: 1W small speaker for picking up soun

d, external speaker: can be used to play music

Enter the settings: advanced system settings (as shown in the figure below, you can

set the following functions)

WIFI signal display, click to open WIFI setting interface

3. Introduction to the drop-down menu: slide down the top of the screen to pop up this page

1

1Timer switch:Timing Switch Machine

2Display settings: check and adjust screen brightness, font height, sleep time

3About the product: view product parameters, scan the QR code to view

product software functions

4Screen saver settings: set screen saver style, host background

5Timing playback: set timing to play music

6485 settings: set 485

7Device info:View device hardware parameters

4. Music player introduction:

2

www.anjielo.com

1

Online music player: Click to open the online

music player

previous piece

mode switch

next track

play / Pause

local music

3

www.anjielo.com

1

6. Function setting:

Timer switch:Timing Switch Machine

4

www.anjielo.com

2Display settings:

2.1 Brightness setting: drag the progress bar below to adjust the brightness

2.2 Sleep setting: Rotate the clock bar to adjust the sleep time. After setting the slee

p time, the host will enter sleep within the corresponding time (if the screen saver s

witch is turned on, the host will enter the screen saver interface, if it is not turned o

n, the host will automatically shut down the screen.)

2.3 Font: Drag the navigation bar below to adjust the font size of the host

2.4 Contrast switch: increase the font display contrast mode after opening

3.About the product:

Software introduction instructions, scan the QR code with WeChat to view

Product hardware description: the hardware parameters of the machine, interface

description, if the wiring description

Product software description: Introduction to the host’s related software APP, fu

nction introduction, interface introduction Voice command description: how to us

e the voice part of the host, how to control the translation part

Product information: related core parameters of the host, information

www.anjielo.com

15

1

4. Screen saver settings:

4.1 Background selection:

4.1.1 Choose different backgrounds according to your hobbies. The system has 4

built-in photos. After selecting a photo, the system background will automatically

switch

4.1.2 Users can choose their own photos, put the photos into the USB flash drive,

insert them into the host, and in the background selection interface, slide to the

right to display a + sign, click the + sign to select the photo they want to use

4.2 Screen saver style:

4.2.1 Switch: Turn on the screen saver switch, the host will automatically enter

the screen saver state when it enters sleep mode

4.2.2 Scheduled screen saver: open the screen saver within a custom time.

4.2.3 Style selection: different styles of hosts will have different screen saver

effects when entering the screen saver

4.2.4 Electronic photo album: import photos to the host automatically, after

selecting the electronic album style, the host will automatically realize the

electronic photo album function when it enters the screen saver

6

www.anjielo.com

17

5. Timing playback: You can set the timing to play music within 10 segments Set the t

ime to play music: click Add, turn on the playback switch, select the playback time, pl

ayback volume, repeat (select the playback repetition period) to select the music to p

lay, click to change a song, and select the corresponding music in the local/TF

card/U disk

www.anjielo.com

18

Switch: Turn off the switch if you don’t need the scheduled playback, and turn

it o n when you need it. Delete: Delete the unnecessary scheduled playback

6.485 settings:Set 485 ID number, and group, 485 protocol can be

obtained by scanning the QR code on the host 6. Online upgrade

www.anjielo.com

19

8.

7.Device info

Back Button

9.Task Manager:Manage Host Tasks

www.anjielo.com

Page is loading ...

Anjielo Smart EN-7-inch Central Control Panel Owner's manual

Anjielo Smart EN-7-inch Central Control Panel Owner's manual

in other languages

Related papers

Other documents