© 2023 DASCOM – Roll Holder for 1140 / 1145 (20230614)
Video
https://youtu.be/UzBF3JOwygQ
Description of the relevant parts
Roll Holder for Tally Dascom 1140/1145
Installation Guide
This guide provides information how to instal your roll holder. Printer firmware is a specific one.
The 1140 printer is also sold as a dark gray but the roller installation is same for either.
For additional information please refer to the User Guide which will be available on our Internet
pages, under the Download Center. Please contact www.dascomamericas.com
Left and right
paper guides
Roll paper
Roll Holder
GND Ground clip
Paper guide plate
QR codes
for videos
Paper path
lever
Port USB
Power socket
Flash the QR code to see video!
© 2023 DASCOM – Roll Holder for 1140 / 1145 (20230614)
Push the two tractors to the centre
OK !
Installation
Press down the roll holder
as shown at the picture
Press the roll holder
down on both sides
“strongly” and shift
tractors to left and right
side!
OK !
OK !
!
"
#
$
%
© 2023 DASCOM – Roll Holder for 1140 / 1145 (20230614)
Install the paper roll and insert paper to the paper guides
Replace both tractors to
the very left and right
side to keep roll holder
in place and fix the
tractors at this position!
OK !
OK !
Paper roll will be used in …
A position
B position
.. will be used for fanfold paper
B
A
&
'
(
IMPORTANT
Place LEFT paper guide as shown
Place the RIGHT guide so that the
paper is guided correctly
© 2023 DASCOM – Roll Holder for 1140 / 1145 (20230614)
Switch on the printer
Dascom Representatives
Germany DASCOM Europe GmbH Heuweg 3 D-89079 Ulm Phone: +49 (0) 731 2075 0
UK DASCOM GB Ltd Hart House, Priestley Road Basingstoke, Hampshire, RG24 9PU Phone: +44 (0) 1256 481481
France DASCOM Europe GmbH 7 Impasse de la Chanée 77410 Annet Sur Marne Phone: +33 (0) 1 85 42 24 00
US DASCOM Americas LLC 34 Lakeview Court Verona, VA 24482, USA Phone: +1 (877) 434 1377
AsiaPacific DASCOM AP Pte Ltd 2 Jurong East Street 21 #05-42, IMM Building, Singapore 609601 Phone: +65 6760 8833
Connect cable to the GND clip
Insert paper upon detected in the printer … then the
paper will be loaded automatically!
Ready!
)
*
Insert the paper guide plate by pressing down to the black bolts (1) and
push it backwards upon fixed on the white bolts (2)
For additionally fixation of the paper roll you will be
able to fix the provided clips at the left and right side
of the paper roll:
-
1
-
2
-
3
-
4
