2. VintageView
  3. Vino Series Mini

VintageView Vino Series Mini Installation guide

  • I have reviewed the Installation Instructions for the Mini T VP-MINI Wine Rack. This document outlines the assembly process, including how to prepare the components and attach them to the clear acrylic stand to create a wine rack that holds up to 6 bottles. I'm ready to answer any questions you have about this product.
  • What is included in the package?
    How do I identify the neck and base support pieces?
    How do I install neck support pieces?
Mini T 6-Bottle Tabletop Acrylic Wine Rack
Mini T (VP-MINI) Installation Instructions
The Mini T 6-Bottle Tabletop Acrylic Wine Rack is a standalone wine storage unit.
Video guides, spec sheets, and additional support are available at vintageview.com.
• (6) Sets (neck and base pieces) of Vino Pins
Bottle Supports
• (12) Vino Pins studs
What’s included
• (1) Clear acrylic stand
Step 1: Prep the Pieces
Identify which Pins support the base of the
bottle and which support the neck. The for-
mer has larger impressions to hold the fatter
end of the bottle.
Screw one Vino Pin Stud into the threaded
end of 3 of the neck support pieces, insert
approximately ½”. Repeat for the 3 base
pieces.
Step 2: Assemble
Identify neck and base mounting holes on
the clear acrylic stand. The neck holes are
elevated.
Using a neck support (with stud inserted)
insert stud through neck hole in stand and
thread a neck pin (without a stud) on to the
stud on the opposite side of the panel. Fully
tighten.
Step 3: Add Wine!
Then take a selfie, tag #heyheywinedisplay,
and post to your favorite social media chan-
nel.
/