Schneider Electric VR Haptic Instruction Sheet

Brand: Schneider Electric

Model: VR Haptic

Type: Instruction Sheet

se.com/edservices

Haptic VR

Quick start guide

1 PLUG IN CHROMECAST

Plug the USB power cable into the

Chromecast and into the power supply

Plug the Chromecast into any open

HDMI input

Plug the power supply intoan open

outlet

Wait for 1 min to boot on the screen

2 PLUG IN THE ROUTER

Insert the SIM card into the slot until you hear a

click

Plug the power adapter intothe back of the

rooter

Plug the power adapter intoan open outlet

Press the power on button at the back

Wait until the icons and appear

Life is On | Schneider ElectricQuick start guide - VR Haptic

3 POWER ON THE VR HEADSET

Power / Standby button

on the right side

Press 3 sec on the power button

Wait for the white led to light up

After 15 sec, you’re ready to go

4 POWER ON THE HAPTIC

DEVICES

Press 3 sec on the power button

Led should be white and slowly pulsing

Power /

Standby button

LED Indicator

5 GET A REMOTE CONTROLLER

Trigger / Select / Click

Press any button to wake up the remote

Then put it to one side to have your

hand free for the headset

6 PUT ON THE VR HEADSET

Place the headset on your head

Adjust the top strap ﬁrst, then the side straps

You should be able to read text

Top straps

Side straps

7 CREATE SAFE TRAINING AREA

Dene gound level

1 - Grab the remote controller

2 - Click on “Create a guardian”

3 - Touch the ground with the controller

4 - Conﬁrm

1 - Point and draw the boundary

2 - Continue

Dene boundary

Life is On | Schneider ElectricQuick start guide - VR Haptic

7 CREATE SAFE TRAINING AREA

Conrm boundary

1 - Conﬁrm the boundary

8 CAST YOUR SCREEN

Enter Casting Mode

1 - Locate the menu in front of you

2 - Select the "Sharing" tab

3 - Click on "Cast"

1 - Select the Chromecast device

2 - Click on “Next“

3 - You should be able to see a red

dot in the top right corner

Select Casting device

9 LAUNCH THE APP

Get to the Schneider HVT app

1 - Select the "Navigate" tab

2 - Click on “Library"

3 - Click on "Unknown sources"

1 -Click on Schneider Icon "Schneider HVT"

2 - Wait for a few seconds, you should hear the theme

song and a green screen

Launch "Schneider HVT"

Life is On | Schneider ElectricQuick start guide - VR Haptic

10 PUT ON THE HAPTIC DEVICES

Wait for the devices to connect to the headset

1 - Drop the controller into the case

2 - Take off the headset

3 - Wait for the haptic devices' led to change color

1 - Put all 4 devices with matching colors to each

ﬁnger

Put on the devices

11 NAVIGATE THE APP

Launch the mission

1 - Click on one of the proposed mission you want to launch

2 - Click on launch

3 - Wait 4-5 sec

4 - You should begin to hear the background noise

1 - Choose the level of difﬁculty you want to operate

(Beginner, Advanced, Expert)

Set the diculty

1 - Look at your hands

2 - You should see your ﬁngers moving

Put the headset back on

1 - Click on “Menu” button

Change your mission

se.com/edservices

• 998-21502161_GMA

Schneider Electric Industries SAS

35, rue Joseph Monier - CS 30323

F92506 Rueil-Malmaison Cedex

11 NAVIGATE THE APP

Quit the app

1 - Click on “Quit" button

1 - Grab the right controller

2 - Face the direction you want to center on with the headset

3 - hold the oculus button for 3+ seconds and release it

Re-Center the scene

1 - Click on “Menu” button

Change boundaries

Just put down the headset

Take a break

Click on the (+) and (-) volume buttons

Volume control

Double tap with your ﬁnger on the right side of the helmet

See your surroundings

Double tap back on the right side

Get back to VR

Occulus button

Volume buttons

Schneider Electric VR Haptic Instruction Sheet

Brand: Schneider Electric

Model: VR Haptic

Type: Instruction Sheet

Download PDF

report

in other languages

eesti: Schneider Electric VR Haptic

Schneider Electric VR Haptic Instruction Sheet

Schneider Electric VR Haptic Instruction Sheet

in other languages

Related papers

Other documents