H3C H3C S7500E Series Installation guide

H3C S7500E Series Ethernet Switches

Installation Manual

Hangzhou H3C Technologies Co., Ltd.

http://www.h3c.com

Document version: T2-080406-20110728-C-1.10

No part of this manual may be reproduced or transmitted in any form or by any means without prior

written consent of Hangzhou H3C Technologies Co., Ltd.

Trademarks

H3C,

, Aolynk, , H

3

Care,

, TOP G, , IRF, NetPilot, Neocean, NeoVTL,

SecPro, SecPoint, SecEngine, SecPath, Comware, Secware, Storware, NQA, VVG, V

2

G, V

n

G, PSPT,

XGbus, N-Bus, TiGem, InnoVision and HUASAN are trademarks of Hangzhou H3C Technologies Co.,

Ltd.

All other trademarks that may be mentioned in this manual are the property of their respective owners

Notice

The information in this document is subject to change without notice. Every effort has been made in the

preparation of this document to ensure accuracy of the contents, but all statements, information, and

recommendations in this document do not constitute the warranty of any kind, express or implied.

Environmental protection

This product has been designed to comply with the environmental protection requirements. The storage,

use, and disposal of this product must meet the applicable national laws and regulations.

Preface

The H3C S7500E Series Ethernet Switches Installation Manual guides you through the installation of your

switch. It covers product overview, preparing for installation, installing the switch, installing modules,

setting up an IRF virtual device, connecting your switch to the network, hardware management and

maintenance, troubleshooting, replacement procedures, hardware specifications, pluggable module

ordering guide, LEDs, cables, cabling recommendations, and a compliance and safety manual.

This preface includes:

• Audience

• Conventions

• About the H3C S7500E documentation set

• Obtaining documentation

• Technical support

• Documentation feedback

Audience

This documentation is intended for:

• Network planners

• Field technical support and servicing engineers

• Network administrators working with the S7500E series

Conventions

This section describes the conventions used in this documentation set.

Command conventions

Convention Description

Boldface Bold text represents commands and keywords that you enter literally as shown.

Italic Italic text represents arguments that you replace with actual values.

[ ] Square brackets enclose syntax choices (keywords or arguments) that are optional.

{ x | y | ... }

Braces enclose a set of required syntax choices separated by vertical bars, from which

you select one.

[ x | y | ... ]

Square brackets enclose a set of optional syntax choices separated by vertical bars, from

which you select one or none.

{ x | y | ... } *

Asterisk marked braces enclose a set of required syntax choices separated by vertical

bars, from which you select at least one.

[ x | y | ... ] *

Asterisk marked square brackets enclose optional syntax choices separated by vertical

bars, from which you select one choice, multiple choices, or none.

Convention Description

&<1-n>

The argument or keyword and argument combination before the ampersand (&) sign can

be entered 1 to n times.

# A line that starts with a pound (#) sign is comments.

GUI conventions

Convention Description

Boldface

Window names, button names, field names, and menu items are in Boldface. For

example, the New User window appears; click OK.

> Multi-level menus are separated by angle brackets. For example, File > Create > Folder.

Symbols

Convention Description

WARNING

An alert that calls attention to important information that if not understood or followed can

result in personal injury.

CAUTION

An alert that calls attention to important information that if not understood or followed can

result in data loss, data corruption, or damage to hardware or software.

IMPORTANT

An alert that calls attention to essential information.

NOTE

An alert that contains additional or supplementary information.

TIP

An alert that provides helpful information.

Network topology icons

Represents a generic network device, such as a router, switch, or firewall.

Represents a routing-capable device, such as a router or Layer 3 switch.

Represents a generic switch, such as a Layer 2 or Layer 3 switch, or a router that supports

Layer 2 forwarding and other Layer 2 features.

Port numbering in examples

The port numbers in this document are for illustration only and might be unavailable on your device.

About the H3C S7500E documentation set

The H3C S7500E documentation set includes:

Category Documents Purposes

Marketing brochures Describe product specifications and benefits.

Technology white papers

Provide an in-depth description of software features

and technologies.

Product description

and specifications

Card datasheets Describe card specifications, features, and standards.

Category Documents Purposes

H3C N68 Cabinet

Installation and Remodel

Introduction

Guides you through installing and remodeling H3C

N68 cabinets.

H3C Pluggable SFP

[SFP+][XFP] Transceiver

Modules Installation Guide

Guides you through installing SFP/SFP+/XFP

transceiver modules.

H3C Mid-Range Series

Ethernet Switches Pluggable

Modules Manual

Describes the hot-swappable modules available for the

Mid-Range Series Ethernet Switches, their external

views, and specifications.

H3C PoE DIMM Module

Installation Guide

Describes how to install the DIMM

(LSBM1POEDIMMH) for PoE master and slave power

management.

Hardware

specifications and

installation

Single PoE DIMM Module

Installation Guide

Describes how to install the 24-port DIMM

(LSQM1POEDIMMS0) for PoE power management.

Configuration guides

Describe software features and configuration

procedures.

Command references Provide a quick reference to all available commands.

Software

configuration

Configuration examples

Describe typical network scenarios and provide

configuration examples and instructions.

Operations and

maintenance

Release notes

Provide information about the product release,

including the version history, hardware and software

compatibility matrix, version upgrade information,

technical support information, and software

upgrading.

H3C PSR320-A[PSR320-D]

Power Module User Manual