Intermec Trakker Antares 2400 User manual

Type
User manual
Myriad Pro Black
AGaramond
Read This First!
This manual contains information about the terminal’s features, installing the terminal, learning about
the menu system, operating the terminal in a network, and troubleshooting problems.
If you need to learn how to configure the terminal, develop and use applications, run diagnostics, use
reader commands and configuration commands, or use default and optional applications, you also need to
download the Trakker Antares 2400 Family System Manual
(P/N 071389).
Trakker Antares
®
242X Handheld
Terminal
User's Manual
Trakker Antares
®
242X Handheld
Terminal
User's Manual
ii Trakker Antares 242X Handheld Terminal User’s Manual
Intermec Technologies Corporation
Corporate Headquarters
6001 36th Ave. W.
Everett, WA 98203
U.S.A.
www.intermec.com
The information contained herein is proprietary and is provided solely for the purpose of allowing customers
to operate and service Intermec-manufactured equipment and is not to be released, reproduced, or used for
any other purpose without written permission of Intermec.
Information and specifications contained in this document are subject to change without prior notice and do
not represent a commitment on the part of Intermec Technologies Corporation.
© 2004 by Intermec Technologies Corporation. All rights reserved.
The word Intermec, the Intermec logo, Norand, ArciTech, CrossBar, Data Collection Browser, dcBrowser,
Duratherm, EasyCoder, EasyLAN, Enterprise Wireless LAN, EZBuilder, Fingerprint, i-gistics, INCA (under
license), InterDriver, Intermec Printer Network Manager, IRL, JANUS, LabelShop, Mobile Framework,
MobileLAN, Nor*Ware, Pen*Key, Precision Print, PrintSet, RoutePower, TE 2000, Trakker Antares, UAP,
Universal Access Point, and Virtual Wedge are either trademarks or registered trademarks of Intermec
Technologies Corporation.
Throughout this manual, trademarked names may be used. Rather than put a trademark ( or ®) symbol in
every occurrence of a trademarked name, we state that we are using the names only in an editorial fashion,
and to the benefit of the trademark owner, with no intention of infringement.
There are U.S. and foreign patents pending.
Wi-Fi is a registered certification mark of the Wi-Fi Alliance.
Microsoft, Windows, and the Windows logo are registered trademarks of Microsoft Corporation in the
United States and/or other countries.
This product includes software developed by the OpenSSL Project for use in the OpenSSL Toolkit.
(http://www.opensssl.org/).
This product includes cryptographic software written by Eric Young (EAY@cryptsoft.com).
Trakker Antares 242X Handheld Terminal User’s Manual iii
Document Change Record
This page records changes to this document. The document was originally released as version 001.
Version Date Description of Change
002 7/1997 This manual was changed to add information about the TRAKKER Antares 2420
terminal and to document the new firmware version.
The new information includes: the TRAKKER Antares 2420 terminal and features, RS-
232 serial communications on the TRAKKER Antares 2425 terminal, TRAKKER
Antares firmware version 2.10, multiple drives and applications on the TRAKKER
Antares 2420 and 2425 terminals, and Western European keypad and character support
on the TRAKKER Antares 2420 and 2425 terminals.
All the functionality described in this manual applies to TRAKKER Antares terminals
with firmware version 1.X and later. However, this manual does describe features that are
only available in TRAKKER Antares firmware version 2.0 and later.
003 12/1997 This manual was changed to add information about the TCP/IP radio frequency network
protocol option on the TRAKKER Antares 2425 terminal and to document the new
firmware version.
The new information includes: TRAKKER Antares 2420 and 2425 firmware version
2.20, the TCP/IP network protocol option on the TRAKKER Antares 2425 terminal that
allows a direct connection from the access points to the host computer, and new terminal
emulation features including auto-login, password security for the TE Configuration
Menu, and international characters display support in TE applications.
The manual was also reorganized to move all information about terminal emulation
applications into a separate guide that ships with the manual. The TRAKKER Antares
Terminal Emulation User’s Guide now contains all the information you need to configure
and use terminal emulation applications. All other information is covered in this user’s
manual.
004 7/1998 An addendum (P/N 067224-001) was added to this manual.
The addendum provides information for firmware version 3.2X: configuring row spacing
and video mode, the space/backspace key has been reversed (Press « for backspace and
press ) « for space.), four-digit date format, configuring the optional 2MB flash
memory, ISBT Code 128, configuration commands to support COM4, configuring the
T2425 to work with DHCP, receiving and transmitting files using YMODEM and
XMODEM-1K, and information on the high density, long range, and high visibility scan
modules.
005 2/1999 This manual was revised to incorporate the addendum and to document new information
for firmware version 5.X: information is included about using the APPTSK.BIN and
EM9560.BIN applications that are preloaded on the terminals, you now use a
programmable terminal instead of a screen mapping terminal to do screen mapping with
the host through the DCS 300, information is included about using the serial interface
module for COM4, XON/XOFF is allowed in Frame mode, and new Set Time and Date
reader command for 95XX terminal compatibility.
006 8/1999 This manual was revised to remove the TRAKKER Antares Terminal Emulation User’s
Guide, P/N 066694-003, and add the Important Terminal Emulation Information sheet,
P/N 069993-001. Also added the dcBrowser information sheet, P/N 070012-001.
007 10/2000 This manual was revised to add the Trakker Antares 24XX Terminal User’s Manual
Addendum, P/N 070451-001.
iv Trakker Antares 242X Handheld Terminal User’s Manual
Document Change Record (continued)
Version Date Description of Change
008 6/2002 Removed system level information that is already included in the Trakker Antares
®
2400
Family System Manual (P/N 071389). The user’s manual now contains information about
how to operate the 242X, and the 2400 Family system manual contains configuration
and reader commands and other information that applies across the Trakker Antares
2400 Family.
Removed and discontinued these documents, because this information is included in the
system manual: the Important Terminal Emulation Information Sheet (P/N 069993-001)
and the Important Data Collection Browser Information Sheet (P/N 070012-002).
Removed these documents, because this information is included in the system manual:
the Trakker Antares 2400 Family User’s Manual Addendum (P/N 070451), the Trakker
Antares 2400 Family Firmware V6.15 Instruction Sheet (P/N 071388), and the Trakker
Antares 2400 Family Firmware V6.20 Instruction Sheet (P/N 071867).
Explained the new features and changes for firmware versions 6.X through 7.12: changed
all references from the Model 200 Controller to the DCS 30X, the data collection server
that replaces the Model 200 Controller, added information about the IEEE 802.11b
radio parameters, included information about the PDF417 and advanced long range scan
module options, added information to support Wireless Transport Protocol (WTP), and
removed Trakker Antares native terminal emulation.
Made minor corrections and changes throughout the manual to support firmware version
7.12.
009 12/2002 Added information to support the 802.1x security option in firmware version 7.14.
010 02/2004 Incorporated information from the Trakker Antares 2400 Family System Manual
Addendum (P/N 073395-001).
Referenced the following new feature for firmware version 8.01:
Trakker Antares support on the Wavelink Avalanche client management system.
Contents
Trakker Antares 242X Handheld Terminal User’s Manual v
Contents
Before You Begin.................................................................................................................ix
Safety Summary......................................................................................................ix
Safety Icons .............................................................................................................x
Global Services and Support ...................................................................................xi
Who Should Read This Document? ..................................................................... xii
Related Documents .............................................................................................. xii
Learning About the Terminal................................................................................................. 1
What Are the Trakker Antares 242X Terminals?.................................................................. 2
Learning About the Terminal’s Features ................................................................. 3
Options for the Terminals ...................................................................................... 4
Accessories for the Terminal ................................................................................... 5
What’s New?........................................................................................................................ 6
Using the Terminal for the First Time................................................................................. 7
Unpacking the Terminal...................................................................................................... 8
Learning About the Terminal’s Batteries.............................................................................. 8
Learning About the Main Battery Pack................................................................... 8
Charging the Main Battery Pack................................................................ 9
Removing and Installing the Main Battery Pack ........................................ 9
Learning About the Backup Battery...................................................................... 11
Charging the Backup Battery................................................................... 12
Removing and Installing the Backup Battery ........................................... 12
Disposing of the NiCad Backup Battery .................................................. 15
Recognizing a Low or Discharged Battery............................................................. 15
Managing Battery Power....................................................................................... 16
Using the Keypad .............................................................................................................. 16
Finding the Special Keys....................................................................................... 17
Typing the Characters Printed on the Keypad ...................................................... 17
Using the Suspend/Resume Key............................................................................ 18
Using the Modifier Keys....................................................................................... 19
Capitalizing All Characters.................................................................................... 19
Using the Western European Keypad ................................................................... 20
Using the TE 2000 Keypads ................................................................................. 21
Using the Screen................................................................................................................21
Learning About the Status Icons ........................................................................................ 22
Learning About the Audio Signals...................................................................................... 23
Using the Terminal’s Serial Ports....................................................................................... 25
Using the Scan Module...................................................................................................... 26
1
Contents
vi Trakker Antares 242X Handheld Terminal User’s Manual
Scanning Options................................................................................................. 28
Connecting to a Serial Device or Network......................................................................... 29
Defining the Terminal’s Memory and Drives..................................................................... 29
Configuring the Terminal....................................................................................................... 33
How to Configure the Terminal ........................................................................................ 34
About the Configurations ..................................................................................... 35
Configuring the Terminal With the Menu System............................................................. 35
Accessing Online Help.......................................................................................... 38
Selecting Menus and Commands.......................................................................... 38
Filling In Fields .................................................................................................... 38
Marking Check Boxes........................................................................................... 39
Entering ASCII Control Characters...................................................................... 40
Exiting Screens and Saving Changes ..................................................................... 41
Exiting the Menu System...................................................................................... 41
Configuring Drives and Memory on the Terminal............................................................. 43
Configuring the RAM Drive................................................................................. 43
Configuring Flash Memory................................................................................... 44
Operating the Terminal in a Network ............................................................................. 45
How the Terminals Fit Into Your Network ....................................................................... 46
Using Serial Communications on the Terminal ................................................................. 51
Choosing a Communications Protocol ................................................................. 52
Binary Protocol........................................................................................ 52
Configurable Protocol.............................................................................. 52
Master Polling Protocol ........................................................................... 53
Point-to-Point Protocol ........................................................................... 54
Polling Mode D Protocol......................................................................... 54
Using RF Communications on the 2425 ........................................................................... 55
Planning the Network Connection ....................................................................... 55
Configuring the Intermec Gateway or DCS 30X .................................................. 56
Configuring the Access Points............................................................................... 57
OpenAir Radio........................................................................................ 57
802.11b Radio......................................................................................... 58
Configuring the 2425 Network Parameters........................................................... 58
Configuring the 802.1x Security Parameters......................................................... 59
Learning About BASEDATE.TXT.......................................................... 59
Configuring 802.1x TTLS Security ......................................................... 60
Configuring 802.1x LEAP Security.......................................................... 61
Monitoring Network Communications................................................................ 63
2
3
Contents
Trakker Antares 242X Handheld Terminal User’s Manual vii
Troubleshooting and Maintaining the Terminal...................................................... 65
Problems and Solutions ..................................................................................................... 66
Problems While Operating the Terminal.............................................................. 67
Problems While Configuring the Terminal........................................................... 69
Problems While Configuring 802.1x Security....................................................... 73
Problems With RF Connectivity (2425 only) ....................................................... 75
Problems While Running Applications ................................................................. 77
Problems Transmitting Data Through the Serial Port........................................... 78
Problems Transmitting Data Through the Intermec Gateway or DCS 30X.......... 79
Problems Scanning Bar Code Labels..................................................................... 79
Guidelines for Managing Batteries........................................................................ 82
Booting the Terminal ........................................................................................................ 83
Booting the Terminal on Resume ......................................................................... 83
Using the Boot Menu........................................................................................... 84
Troubleshooting a Locked Up Application ........................................................................ 85
Resetting the Terminal ...................................................................................................... 85
Maintaining and Cleaning the Terminal............................................................................ 87
Replacing the Antenna.......................................................................................... 87
Cleaning the Scan Module Window and Terminal Screen.................................... 89
Specifications ................................................................................................................................ 91
Physical and Environmental Specifications......................................................................... 92
Terminal Cable Accessories................................................................................... 95
Input Devices for the Input Device Module.......................................................... 95
Scan Module Options........................................................................................... 95
Pin Assignments for COM1 .............................................................................................. 98
Index................................................................................................................................................... 99
4
A
I
Contents
viii Trakker Antares 242X Handheld Terminal User’s Manual
Before You Begin
Trakker Antares 242X Handheld Terminal User’s Manual ix
Before You Begin
This section provides you with safety information, technical support
information, and sources for additional product information.
Safety Summary
Your safety is extremely important. Read and follow all warnings and
cautions in this document before handling and operating Intermec
equipment. You can be seriously injured, and equipment and data can be
damaged if you do not follow the safety warnings and cautions.
Do not repair or adjust alone
Do not repair or adjust energized equipment alone under any
circumstances. Someone capable of providing first aid must always be
present for your safety.
First aid
Always obtain first aid or medical attention immediately after an injury.
Never neglect an injury, no matter how slight it seems.
Resuscitation
Begin resuscitation immediately if someone is injured and stops breathing.
Any delay could result in death. To work on or near high voltage, you
should be familiar with approved industrial first aid methods.
Energized equipment
Never work on energized equipment unless authorized by a responsible
authority. Energized electrical equipment is dangerous. Electrical shock
from energized equipment can cause death. If you must perform
authorized emergency work on energized equipment, be sure that you
comply strictly with approved safety regulations.
Before You Begin
x Trakker Antares 242X Handheld Terminal User’s Manual
Safety Icons
This section explains how to identify and understand dangers, warnings,
cautions, and notes that are in this document. You may also see icons that
tell you when to follow ESD procedures and when to take special
precautions for handling optical parts.
A warning alerts you of an operating procedure, practice, condition,
or statement that must be strictly observed to avoid death or serious
injury to the persons working on the equipment.
Avertissement: Un avertissement vous avertit d’une procédure de
fonctionnement, d’une méthode, d’un état ou d’un rapport qui doit
être strictement respecté pour éviter l’occurrence de mort ou de
blessures graves aux personnes manupulant l’équipement.
A caution alerts you to an operating procedure, practice, condition, or
statement that must be strictly observed to prevent equipment damage
or destruction, or corruption or loss of data.
Attention: Une précaution vous avertit d’une procédure de
fonctionnement, d’une méthode, d’un état ou d’un rapport qui doit
être strictement respecté pour empêcher l’endommagement ou la
destruction de l’équipement, ou l’altération ou la perte de données.
Note: Notes either provide extra information about a topic or contain
special instructions for handling a particular condition or set of
circumstances.
Before You Begin
Trakker Antares 242X Handheld Terminal User’s Manual xi
Global Services and Support
Warranty Information
To understand the warranty for your Intermec product, visit the Intermec
web site at http://www.intermec.com and click Service & Support. The
Intermec Global Sales & Service page appears. From the Service &
Support menu, move your pointer over Support, and then click
Warranty.
Disclaimer of warranties: The sample code included in this document is
presented for reference only. The code does not necessarily represent
complete, tested programs. The code is provided “as is with all faults.” All
warranties are expressly disclaimed, including the implied warranties of
merchantability and fitness for a particular purpose.
Web Support
Visit the Intermec web site at http://www.intermec.com to download our
current documents in PDF format. To order printed versions of the
Intermec manuals, contact your local Intermec representative or
distributor.
Visit the Intermec technical knowledge base (Knowledge Central) at
http://intermec.custhelp.com to review technical information or to request
technical support for your Intermec product.
Telephone Support
These services are available from Intermec Technologies Corporation.
Service
Description
In the U.S.A. and Canada
call 1-800-755-5505
and choose this option
Factory Repair and
On-site Repair
Request a return authorization
number for authorized service
center repair, or request an on-
site repair technician.
1
Technical Support Get technical support on your
Intermec product.
2
Service Contract
Status
Inquire about an existing
contract, renew a contract, or
ask invoicing questions.
3
Schedule Site Surveys
or Installations
Schedule a site survey, or
request a product or system
installation.
4
Ordering Products Talk to sales administration,
place an order, or check the
status of your order.
5
Before You Begin
xii Trakker Antares 242X Handheld Terminal User’s Manual
Outside the U.S.A. and Canada, contact your local Intermec
representative. To search for your local representative, from the Intermec
web site, click Contact.
Who Should Read This Document?
This manual provides you with information about the features of the
Trakker Antares 2420 and 2425 handheld terminals, and how to install,
configure, operate, maintain, and troubleshoot them. Use this manual in
conjunction with the Trakker Antares 2400 Family System Manual (P/N
071389), which contains detailed information about configuring,
operating, and programming all terminals in the 2400 Family.
Before you install and configure the 242X, you should be familiar with
your network and general networking terms, such as IP address.
Related Documents
The Intermec web site at http://www.intermec.com contains our current
documents that you can download as PDF files.
To order printed versions of the Intermec manuals, contact your local
Intermec representative or distributor.
Trakker Antares 242X Handheld Terminal User’s Manual 1
Learning About the Terminal
This chapter introduces the Trakker Antares
®
2420 and 2425 handheld
terminals and their features including the batteries, memory, drives, and
input devices. It also describes how to start using the 242X.
This chapter covers these topics:
Overview of the Trakker Antares 242X terminals
• What’s new
Using the terminal for the first time
Unpacking the terminal
Learning about the terminal’s batteries
• Using the keypad
• Using the screen
Learning about the status icons
Learning about the audio signals
Using the terminal’s serial ports
Using the scan module
Connecting to a serial device or network
Defining the terminal’s memory and drives
1
Chapter 1— Learning About the Terminal nugget 39 AGaramond
2 Trakker Antares 242X Handheld Terminal User’s Manual
What Are the Trakker Antares 242X Terminals?
The 2420 and 2425 are ergonomic handheld data collection terminals.
You can use these programmable terminals to run custom applications or
terminal emulation applications.
I/O
F
1
F
2
F
4
F
3
F
5
F
n
L
A
B
C
DE
F
G
H
IJ
K
L
M
NO
P
Q
R
ST
U
Z
V
W
X
Y
F
n
R
E
n
t
e
r
7
8
9
4
5
6
1
2
0
3
T
a
b
E
s
c
242XU035.eps
I/O
F
1
F
2
F
4
F
3
F
5
F
n
L
A
B
C
D
E
F
G
H
I
J
K
L
M
N
O
P
Q
R
S
T
U
Z
V
W
XY
F
n
R
E
n
t
e
r
7
8
9
4
5
6
1
2
0
3
T
a
b
E
s
c
2420 Handheld terminal 2425 Handheld terminal
2420
The 2420 is a programmable data collection terminal that runs custom
batch applications. It has a 750K flash drive to store applications and files
and 512K of RAM reserved for custom applications. The 2420 also has an
integrated input/output (I/O) port to transmit data to and accept data
from a host computer or other serial device using RS-232
communications.
2425
The 2425 has all of the same functionality as the 2420 with the additional
ability for real-time communications through an RF network. The 2425
can communicate with a host either through the access points and the
DCS 30X or directly through the access points. The 2425 can also run
client/server applications, TE 2000 terminal emulation applications, and
Data Collection Browser (dcBrowser), which lets you run web-based
applications.
The 2425 is also supported by the Wavelink Avalanche client management
system. For more information, see Chapter 2, “Configuring and Managing
the Terminals,” in the Trakker Antares 2400 Family System Manual (P/N
071389).
The 2425 with an IEEE 802.11b radio installed is Wi-Fi certified for
interoperability with other 802.11b wireless LAN devices.
nugget 39 AGaramond Chapter 1— Learning About the Terminal
Trakker Antares 242X Handheld Terminal User’s Manual 3
Learning About the Terminal’s Features
The 242X is designed to make data collection easy and includes the
following features.
I
/O
F
1
F2
F4
F3
F5
Fn L
A
B
C
D
E
F
G
H
I
J
K
L
M
NO
P
Q
R
S
T
U
Z
V
W
X
Y
F
n
R
E
nte
r
7
8
9
4
5
6
1
2
0
3
Tab
E
s
c
242XU030.eps
Keypad
CGA-compatible screen
Antenna
(2425 only)
Rechargeable
batteries
Scan module,
serial module, or
input device module
Serial port
Scanner LEDs
TRA
K
KER
ANT
ARES
2425
242X features: This illustration points out the key features of the 242X. See the next
table for a description of each feature.
242X Features
Feature Description
CGA-compatible
screen
The screen is a backlit LCD that is angled for easy viewing. It
displays 16 lines by 20 characters and supports double-byte
characters, user-programmable fonts, and bitmap graphics.
Scanner LEDs The scanner LEDs indicate the status of bar code scanning.
The 242X also has status icons and a beeper that provide you
with feedback for terminal operations.
Keypad The 242X ships with a 56-key keypad and overlay to match
the application and language you ordered.
Serial port The serial port supports RS-232 communications with other
RS-232 devices.
Rechargeable batteries The 242X uses a lithium-ion battery pack (sold separately) for
main power. The terminal also has a rechargeable Nickel-
Cadmium (NiCad) backup that maintains the terminal’s
status, memory, and real-time clock (for up to 15 minutes).
Antenna (2425 only) The 2425 uses an antenna that supports radio frequency (RF)
communications.
Scan module, serial
module, or input
device module
The terminal ships with a scan module for bar code data
collection, a serial module for serial communications, or an
input device module to connect an external input device to
the terminal.
Chapter 1— Learning About the Terminal nugget 39 AGaramond
4 Trakker Antares 242X Handheld Terminal User’s Manual
Options for the Terminals
Use the next table to determine which options are available for the 2420
and 2425.
2420 and 2425 Options
Terminal Options
2420
56-key alphanumeric keypad and overlay to support English or
Western European languages
4MB flash memory configured as an additional 2MB flash drive for
custom applications (except .BIN files) and files or pre-loaded with
different Asian fonts
2MB or 4MB extended storage drive, used for custom applications
or files
Modem
2425
56-key alphanumeric keypad and overlay to support English or
Western European languages
Input device or scanner module a (standard range, long range,
advanced long-range, high visibility, high density, or PDF417
capable
4MB flash memory configured as an additional 2MB flash drive for
custom applications (except .BIN files) and files, pre-loaded with
different Asian fonts, or configured for 802.1x TTLS security
TE 2000 IBM 3270, TE 2000 IBM 5250, and TE 2000
VT/100/220/320 and ANSI terminal emulation application and
keypad
Data Collection Browser (dcBrowser) application
Trakker Antares ROM-DOS™ support
UDP Plus (Intermec Gateway or DCS 30X network), WTP
(Intermec Gateway or DCS 30X network), or TCP/IP (direct
connect to host) network protocol
WLI Forum OpenAir radio or IEEE 802.11b radio
This manual explains how to use the features and options available on the
Trakker Antares 2420 and 2425 terminals.
For additional help using terminal emulation, see the appropriate TE
guide:
TE 2000 5250 Terminal Emulation Programmer’s Guide (P/N
977-055-004)
TE 2000 3270 Terminal Emulation Programmer’s Guide (P/N
977-055-003)
TE 2000 VT/ANSI Terminal Emulation Programmer’s Guide (P/N
977-055-005)
nugget 39 AGaramond Chapter 1— Learning About the Terminal
Trakker Antares 242X Handheld Terminal User’s Manual 5
For additional help using dcBrowser, see the online help that ships with
the dcBrowser gateway software, or see the Data Collection Browser Client
User’s Guide (P/N 070011).
Accessories for the Terminal
You can use the following accessories (sold and ordered separately) with
the terminals.
242X Accessories
Accessory Description
Main Battery Pack The lithium-ion battery pack (P/N 073152) is the main
power source for the 242X and charges the backup battery
when required.
Backup Battery The NiCad backup battery (P/N 063189) provides backup
battery power for a maximum of 1 month if a fully-charged
main battery pack is installed or a maximum of 3 days if a
main battery pack is not installed.
Z2400 Battery Charger The charger (P/N Z2400A) lets you charge up to four
lithium-ion battery packs at one time. The battery charger
senses when a battery pack is fully charged and will not
overcharge it, ensuring long and consistent battery pack life.
You must connect a power supply to the charger charge the
batteries.
Belt Clip The belt clip (P/N 064022) lets you attach the terminal to
your belt and have it hang at your side so you can have both
hands free. The belt clip snaps around your belt and a Velcro
strap holds the terminal to the belt clip.
Handstrap The elastic handstrap (P/N 064020) attaches to the back of
the terminal to let you hold the terminal easily and securely
for long periods of use.
Holster The holster (P/N 064018) is a convenient way for you to
carry the terminal on your belt when you are not using it. The
holster attaches to your belt and holds the terminal at your
side.
Vehicle-Mount Holder You can attach this holder (P/N 064017) to a vehicle, such as
a forklift, so that you can securely store the terminal while the
vehicle is moving.
TD2400
Communications
Dock
When you place the terminal in the dock (P/N TD2400A), it
allows the terminal to communicate with a host computer or
other device through the serial port. You must connect the
AC power supply to the dock to operate the terminal and
charge the batteries.
Optical Link Adapter When the optical link adapter (P/N 064021) is connected to
the terminal, it allows the terminal to communicate with a
host computer or other device through the serial port. You
can also connect the AC power supply to the optical link
adapter to charge the batteries.
Chapter 1— Learning About the Terminal nugget 39 AGaramond
6 Trakker Antares 242X Handheld Terminal User’s Manual
242X Accessories (continued)
Accessory Description
AC power supply The AC power supply (P/N 065236 or P/N 073941) allows
you to power the terminal and charge the battery pack with
the communications dock or the optical link adapter. P/N
065236 comes with a North American power cord. If you are
using the terminal outside North America, you need to order
P/N 073941 and purchase the appropriate power cord.
Handle The handle (P/N 068393) provides a convenient way to hold
the terminal and use trigger-activated scanning.
Serial Interface
Module
When the serial interface module (P/N 064313) is connected
to the terminal, it allows the terminal to communicate with a
PC or printer through the serial port.
Input Device Module This module (P/N 064025) has a scanner port that lets you
attach a wand, laser scanner, or CCD scanner for bar code
data collection.
Standard Range Scan
Module
The standard range laser scan module (P/N 069223) is an
integrated scanner that lets you scan bar code labels from up
to 68.6 cm (30 in) away depending on the bar code height
and density.
Long Range Scan
Module
This scan module (P/N 069224) is an integrated scanner that
lets you scan bar code labels from up to 5.2 m (17 ft) away
depending on the bar code height and density.
Advanced Long Range
Scan Module
This scan module (P/N 072618) is an integrated scanner that
lets you scan bar code labels from up to 8.2 m (27 ft) away
depending on the bar code height and density.
High Visibility Scan
Module
This scan module (P/N 069225) is an integrated scanner that
lets you scan bar code labels in brighter environments, such as
in sunlight.
High Density Scan
Module
This scan module (P/N 069226) is an integrated scanner that
lets you scan bar code labels that are too dense for a normal
scan module.
PDF417 Laser Scan
Module
This scan module (P/N 071385) is an integrated scanner that
lets you scan PDF417 bar code labels in addition to other bar
code labels.
What’s New?
With this user’s manual revision, the following changes were made to
support software on Trakker Antares 242X terminals with firmware
version 8.01:
Software was added to the Trakker Antares terminals to support the
Wavelink Avalanche client management system. For more information,
see Chapter 2, “Configuring and Managing the Terminals,” in the 2400
Family System manual.
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35
  • Page 36 36
  • Page 37 37
  • Page 38 38
  • Page 39 39
  • Page 40 40
  • Page 41 41
  • Page 42 42
  • Page 43 43
  • Page 44 44
  • Page 45 45
  • Page 46 46
  • Page 47 47
  • Page 48 48
  • Page 49 49
  • Page 50 50
  • Page 51 51
  • Page 52 52
  • Page 53 53
  • Page 54 54
  • Page 55 55
  • Page 56 56
  • Page 57 57
  • Page 58 58
  • Page 59 59
  • Page 60 60
  • Page 61 61
  • Page 62 62
  • Page 63 63
  • Page 64 64
  • Page 65 65
  • Page 66 66
  • Page 67 67
  • Page 68 68
  • Page 69 69
  • Page 70 70
  • Page 71 71
  • Page 72 72
  • Page 73 73
  • Page 74 74
  • Page 75 75
  • Page 76 76
  • Page 77 77
  • Page 78 78
  • Page 79 79
  • Page 80 80
  • Page 81 81
  • Page 82 82
  • Page 83 83
  • Page 84 84
  • Page 85 85
  • Page 86 86
  • Page 87 87
  • Page 88 88
  • Page 89 89
  • Page 90 90
  • Page 91 91
  • Page 92 92
  • Page 93 93
  • Page 94 94
  • Page 95 95
  • Page 96 96
  • Page 97 97
  • Page 98 98
  • Page 99 99
  • Page 100 100
  • Page 101 101
  • Page 102 102
  • Page 103 103
  • Page 104 104
  • Page 105 105
  • Page 106 106
  • Page 107 107
  • Page 108 108
  • Page 109 109
  • Page 110 110
  • Page 111 111
  • Page 112 112
  • Page 113 113
  • Page 114 114
  • Page 115 115
  • Page 116 116
  • Page 117 117
  • Page 118 118
  • Page 119 119
  • Page 120 120
  • Page 121 121
  • Page 122 122
  • Page 123 123
  • Page 124 124
  • Page 125 125
  • Page 126 126
  • Page 127 127
  • Page 128 128
  • Page 129 129
  • Page 130 130
  • Page 131 131
  • Page 132 132
  • Page 133 133
  • Page 134 134

Intermec Trakker Antares 2400 User manual

Type
User manual

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI