COX Homelife Smart Plug User guide

COX
Brand
COX
Model
Homelife Smart Plug
Type
User guide

This manual is also suitable for

COX Homelife Smart Plug

The COX Homelife Smart Plug is a convenient and easy-to-use device that allows you to remotely control your lights or small appliances using the Cox Homelife mobile app or online Subscriber Portal.

With the Smart Plug, you can:

  • Turn your lights or appliances on or off remotely using your smartphone or computer
  • Set up Rules to automate when your lights or appliances turn on or off
  • Control your lights or appliances from anywhere with an internet connection

The Smart Plug is easy to install and pair with your Homelife system. Simply plug the Smart Plug into an outlet and follow the pairing instructions in the manual.

COX Homelife Smart Plug

The COX Homelife Smart Plug is a convenient and easy-to-use device that allows you to remotely control your lights or small appliances using the Cox Homelife mobile app or online Subscriber Portal.

With the Smart Plug, you can:

  • Turn your lights or appliances on or off remotely using your smartphone or computer
  • Set up Rules to automate when your lights or appliances turn on or off
  • Control your lights or appliances from anywhere with an internet connection

The Smart Plug is easy to install and pair with your Homelife system. Simply plug the Smart Plug into an outlet and follow the pairing instructions in the manual.

Smart Plug
Installation & Pairing Instructions
With the Smart Plug from Homelife, you can easily control your lights or small
appliances remotely using the Cox Homelife mobile app or online Subscriber
Portal, and set up Rules that automate when they turn on or off. Follow these
simple steps to install and pair your new Smart Plug with the Homelife system.
Expected Installation Time: 5 minutes
Watch Installation Video
Before you begin, watch the Smart Plug installation video at
cox.com/diyhomelife on your mobile device, tablet or computer.
Install Smart Plug
1. Start by plugging the Smart Plug into your outlet. The blue light above
the power button on the front of the Smart Plug should begin to blink,
indicating it is ready to pair with your Homelife system.
Pair Smart Plug with Touchscreen
1. On your Touchscreen Control Panel, press the Settings app.
2. Enter your 4-digit master keypad code.
3. From the Settings menu, select Home Devices > Lighting > Add
Lights.
4. The Locating Lighting Devices screen will appear. Press Next to
begin the pairing process. Once the Smart Plug is found by the
Touchscreen, the blue light on the plug will become solid.
(Note: Do not press Done during the pairing process.)
5. When the “On/Off Light” icon appears, pairing is
complete. Press Done. Then press Next to configure the device.
1
2
3
INSTALLATION TIP
Pair the Smart Plug using an
outlet near your Touchscreen. You
can move the plug to any location
after pairing is complete.
If the Smart Plug does not blink immediately, or if it has timed out,
you can reset it.
1. Remove the Smart Plug from the outlet
2. Press and hold the power button while you plug it back in
3. Release the power button as soon as the blue light begins to blink
TROUBLESHOOTING TIP
If the outlet is switch-controlled, make sure the power is
turned on.
TROUBLESHOOTING TIP
INSTALLATION TIP
The Smart Plug is added to the
system using the same process as
lighting devices, and is controlled
using the Lights app.
Continued on next page…
Power
button
cox.com/diyhomelife
START HERE
Step 5: Press Done after pairing is complete
Smart Plug
Installation & Pairing Instructions
4
IMPORTANT: The power switch on the light fixture or small appliance that is plugged into the Smart
Plug must remain in the ON position at all times in order to control it remotely.
To learn how to set up Rules and find other helpful information, visit
us online at cox.com/diyhomelife
For Homelife technical support, call 1-877-404-2568
Configure Smart Plug
1. On the Configure Lighting Devices screen, press the
“On/Off Light” icon to configure it.
2. Tap the ‘On/Off Light Name’ field to display a keyboard.
Delete the default name and enter the desired name for
the light fixture or appliance being controlled by the Smart
Plug (example: Living Room Lamp).
3. The dimming feature is not available on this device, so
leave the ‘Dimmable’ field set to No.
4. Press Next to complete configuration. Press the
Touchscreen’s home button to return to the home
screen.
You can now control your Smart Plug using the Lights app on your Touchscreen, Homelife mobile app or
online Subscriber Portal.
The Smart Plug can be used for lamps and small appliances that do not exceed 12 Amps.
Congratulations, the installation and pairing process is now complete!
Step 2: Change Device Name
  • Page 1 1
  • Page 2 2

COX Homelife Smart Plug User guide

COX
Brand
COX
Model
Homelife Smart Plug
Type
User guide
This manual is also suitable for

COX Homelife Smart Plug

The COX Homelife Smart Plug is a convenient and easy-to-use device that allows you to remotely control your lights or small appliances using the Cox Homelife mobile app or online Subscriber Portal.

With the Smart Plug, you can:

  • Turn your lights or appliances on or off remotely using your smartphone or computer
  • Set up Rules to automate when your lights or appliances turn on or off
  • Control your lights or appliances from anywhere with an internet connection

The Smart Plug is easy to install and pair with your Homelife system. Simply plug the Smart Plug into an outlet and follow the pairing instructions in the manual.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents