Sealey 3S-4R.V3 metal cutting shears are designed for precise cutting of steel sheets and bars. With a maximum cut length of 105mm and a capacity to cut round bars up to Ø10mm and sheets up to 4mm thick, these shears are ideal for various metalworking tasks. The hardened steel shear blades ensure long-lasting sharpness and durability.
Sealey 3S-4R.V3 metal cutting shears are designed for precise cutting of steel sheets and bars. With a maximum cut length of 105mm and a capacity to cut round bars up to Ø10mm and sheets up to 4mm thick, these shears are ideal for various metalworking tasks. The hardened steel shear blades ensure long-lasting sharpness and durability.
METAL CUTTING SHEARS
MODEL NO: 3S/4R.V3, 3S/5R.V3, 3S/6R.V3
Thank you for purchasing a Sealey product. Manufactured to a high standard, this product will, if used according to these
instructions, and properly maintained, give you years of trouble free performance.
I
MP
PO
R
RTA
TA
NT:
PLEA
S
E READ THE
S
E IN
S
TRU
C
TI
O
N
S
C
AREFULLY. N
O
TE THE
S
AFE
O
PERATI
O
NAL RE
Q
UIREMENT
S
, WARNIN
GS
&
C
AUTI
O
N
S
. U
S
E
TH
HE
P
PR
O
ODU
C
T
CO
RRE
C
TLY AND WITH
C
ARE F
O
R THE P
U
RP
OS
E F
O
R WHI
C
H IT I
S
INTENDED. FAIL
U
RE T
O
D
O
SO
MAY
C
A
US
E DAMA
G
E AND
/O
R
PE
ER
S
SON
N
AL IN
JU
RY AND WILL INVALIDATE THE WARRANTY. KEEP TH
ESE
IN
STR
UCT
ION
S S
AFE
FO
R F
U
T
U
RE
USE
.
1. SAFETY
Ensure that the shears are securely mounted on a rigid work surface surrounded by suffi cient free area to manipulate the workpiece
easily and safely.
Always wear suitable Personal Protective Equipment to guard against injury. Protective goggles and gloves are available from your
Sealey Stockist. Non slip footwear should be worn.
Make sure that the work area is well lit and is kept tidy. The fl oor should be dry and clean.
DO NOT allow fi ngers or hands to come into close proximity to the cutting wheels and beware of sharp edges and swarf.
DO NOT use this product if tired or under the infl uence of alcohol or drugs.
Keep children well away from this product at all times.
2. INTRODUCTION
Manufactured from steel-plate and fi tted with hardened steel shear blades for accurate cutting and long life. Designed to be bolted to the
bench. Suitable for cropping steel sheet and bar.
3. SPECIFICATION
Model No:.......................................................3S/4R.V3 .................................. 3S/5R.V3 ................................3S/6R.V3
Maximum Cut Length: ........................................105mm ......................................135mm ................................... 175mm
Round Bar: .......................................................Ø10mm* ....................................Ø11mm* ................................. Ø12mm*
Sheet: .................................................................. 4mm* ........................................ 5mm* ......................................6mm*
Note: *Capacity in Steel
4. ASSEMBLY
4.1. Securely bolt the body of the shear to a strong work surface at a comfortable height.
4.2. Connect both parts of the handle together and attach it to the body.
5. OPERATION
Ensure that the shears are securely mounted on a rigid work surface
surrounded by suffi cient free area to manipulate the workpiece
easily and safely.
DO NOT force this machine to cut metals beyond its specifi ed range.
5.1. CUTTING FLAT METAL
5.1.1. Scribe a line on the metal to be cut.
5.1.2. Line up scribe mark with jaws and pull handle.
5.1.3. If required, use the adjustable support rod to stop metal from
deforming while cutting.
5.1.4. Extend the handle for the thicker metals.
5.1.5. When cutting a sheet of metal, take small cuts and feed the sheet
into the jaws being careful to keep your fi ngers clear of the jaws.
If the sheet of metal is awkward make sure you have assistance.
5.2. CUTTING ROUND BAR
5.2.1. Round bar can be cut using the bar cutting hole in the blade.
6. MAINTENANCE
6.1. Lightly oil moving components.
Bar Cutter
Adjustable
Support Rod
fi g.1
3S/4RV3, 3S/5R.V3, 3S/6R.V3, Issue 2 (3) 09/11/21
Original Language Version
© Jack Sealey Limited
Refer to
instructions
Wear eye
protection
Wear protective
gloves
Sealey Group, Kempson Way, Suffolk Business Park, Bury St Edmunds, Suffolk. IP32 7AR
01284 757500 01284 703534 sales@sealey.co.uk www.sealey.co.uk
ENVIRONMENT PROTECTION
Recycle unwanted materials instead of disposing of them as waste. All tools, accessories and packaging should be sorted, taken to
a recycling centre and disposed of in a manner which is compatible with the environment. When the product becomes completely
unserviceable and requires disposal, drain any fluids (if applicable) into approved containers and dispose of the product and fluids
according to local regulations.
3S/4RV3, 3S/5R.V3, 3S/6R.V3, Issue 2 (3) 09/11/21
Original Language Version
© Jack Sealey Limited
Note: It is our policy to continually improve products and as such we reserve the right to alter data, specifications and component parts without prior
notice. Please note that other versions of this product are available. If you require documentation for alternative versions, please email or call our
technical team on technical@sealey.co.uk or 01284 757505.
Important: No Liability is accepted for incorrect use of this product.
Warranty: Guarantee is 12 months from purchase date, proof of which is required for any claim.
-
1
-
2
Sealey 3S-4R.V3 metal cutting shears are designed for precise cutting of steel sheets and bars. With a maximum cut length of 105mm and a capacity to cut round bars up to Ø10mm and sheets up to 4mm thick, these shears are ideal for various metalworking tasks. The hardened steel shear blades ensure long-lasting sharpness and durability.
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Related papers
-
Sealey SBSC01.V2 User manual
-
Sealey AK4564D.V2 User manual
-
-
-
-
-
Sealey SSP5D User manual
-
-
-