2. Lutron
  3. PD-6ANS-WH
PD-6ANS-WH

Lutron PD-6ANS-WH, Technical Support Wiring Tool Diagrams Installation guide

  • Hello! I've reviewed the Technical Support Wiring Tool Diagrams document for a dimmer with one black, one red, one blue, and one white wire in a 3-way setup using a Pico remote. This document includes wiring instructions for multiple locations and a helpful color code chart. I'm ready to answer any questions you have about the wiring process described in this document.
  • What is the purpose of the 'Tagged Wire'?
    What colors are used for ground wires?
    What is the purpose of this document?
47
05.12.2021
368-4493h
Technical Support Wiring Tool Diagrams
Not sure this is the correct wiring for your Lutron product?
For more information, refer to the Lutron DIY Wiring Tool or visit the Lutron Support Center.
Image #33 — Dimmer with One Black Wire, One Red Wire, One Blue Wire, and one White Wire in a 3-Way
Application with a Pico Remote
Tagged
Wire
Green
(Ground)
Ground
(Green or
Bare Copper)
Ground
(Green
or Bare
Copper)
Different
Color
Screw
Place tag - to identify wire on
different color screw.
Location 2
Location 1
Black
Blue
White
Red Tagged
Wire
Before After
Continued on next page...
48
05.12.2021
368-4493h
Technical Support Wiring Tool Diagrams
Not sure this is the correct wiring for your Lutron product?
For more information, refer to the Lutron DIY Wiring Tool or visit the Lutron Support Center.
Red
Rojo
Rouge
Black
Negro
Noire
White
Blanco
Blanc
Load
Carga
Charge
Ground | Tierra | Mise à la terre
Green | Verde | Vert
Neutral | Neutro | Neutre
Line
Vivo
Phase
Blue | Azul | Bleu
Image #33 — Dimmer with One Black Wire, One Red Wire, One Blue Wire, and one White Wire in a 3-Way
Application with a Pico Remote (continued)
/