CURT 45908 Installation guide

Brand: CURT

Model: 45908

Type: Installation guide

CURT 45908 is a channel-mount pintle hitch that provides a secure and adjustable connection between your vehicle and trailer. It features an easy-to-install design with a channel-mount that fits into the trailer hitch of your vehicle and a pintle head that can be raised or lowered to the desired height. The included pins and clips ensure a rattle-free connection, while the anti-rattle set screw eliminates any possible noise. It's important to note that the supplied pins are specifically engineered for the channel-mount system and should not be replaced with non-original parts.

CURT 45908 is a channel-mount pintle hitch that provides a secure and adjustable connection between your vehicle and trailer. It features an easy-to-install design with a channel-mount that fits into the trailer hitch of your vehicle and a pintle head that can be raised or lowered to the desired height. The included pins and clips ensure a rattle-free connection, while the anti-rattle set screw eliminates any possible noise. It's important to note that the supplied pins are specifically engineered for the channel-mount system and should not be replaced with non-original parts.

CURTMFG.COM • NEED ASSISTANCE? • 877.287.8634

• 45908-INS-R A • PAGE 1

INSTALLATION MANUAL 45908

Parts List

1 Channel-mount

1 Pintle head

1 Hitch pin & clip

2 Channel-mount pin & clip

1 Anti-rattle set screw

Level of Difﬁculty

Easy

Notes

Before you begin installation, read all instructions thoroughly.

Proper tools will improve the quality of installation and reduce the time required.

Before towing, ensure all pins & clips are secured.

Do not overload any part of your towing system.

See the vehicle owner's manual to determine the vehicle tow rating.

WARNINGS

Never exceed the vehicle manufacturer's recommended towing capacity. The ratings of the

channel-mount system are intended to represent the capability of the product and in no way

reflect the ratings or capacity of the towing system it is being used with. The consumer or

operator are strongly advised to learn the ratings of the various components of the towing

system and never exceed the limits of the lowest rated component being used.

Use of any pin other than that of the channel-mount system manufacturer

could be a serious safety hazard and will void the warranty.

Never hook up trailer safety chains to the channel-mount system. Ensure the safety chains

operate freely around the channel-mount system and do not become entangled.

Product Photo

Step 1

Insert the adjustable channel-mount into the

trailer hitch of the vehicle and secure with

the provided hitch pin & clip. Always secure

the hitch pin with a clip unless a locking

device is being used.

Step 2

Insert the pintle head into the channel

mount and raise or lower it to the desired

height. Insert the supplied pins through

the holes that line up with the holes in

the channel-mount and secure with the

provided clips.

Note: The supplied pins are specifically

engineered for the channel-mount system.

If replacement pins are needed, they must

be replaced with original factory channel-

mount pins (CURT# 45925).

Step 3

Insert the anti-rattle set screw

and tighten to eliminate noise.

Note: Use of the set screw is not needed

for safety; only to eliminate possible rattle

between the channel-mount and pintle.

1

CURT 45908 Installation guide

Brand: CURT

Model: 45908

Type: Installation guide

CURT 45908 is a channel-mount pintle hitch that provides a secure and adjustable connection between your vehicle and trailer. It features an easy-to-install design with a channel-mount that fits into the trailer hitch of your vehicle and a pintle head that can be raised or lowered to the desired height. The included pins and clips ensure a rattle-free connection, while the anti-rattle set screw eliminates any possible noise. It's important to note that the supplied pins are specifically engineered for the channel-mount system and should not be replaced with non-original parts.

Related papers

Other documents