Angelo Decor AD95250 Operating instructions

hank you for buyin

an An

elo Decor Fountain!

We hope you will find these instructions helpful in settin

up your fountain. If you need more

information to properly care for your fountain, please DO NOT return the unit to place of purchase.

Please visit our web site, www.an

elodecor.com, for assistance and warranty information.

First unpack carton carefully, arran

parts safely in your workin

area.

cord through standpipe cord through bowl cord through pedestal

Feed light power cord through top, then base, and out groove at bottom. Secure bowl into place

Now simply fill with clean water and plu

ht and pump into a

rounded GFCI outlet

We recommend keepin

bowl 3/4 full of water to avoid pump burnout.

Set pump flow to 2/3

force for best results.

Attach tube to pump.

Make sure pump sits

firmly on bottom, and

secure top into place.

Add decorative rocks

for finished look. The

light unit is photo

sensitive, and will

come on

automatically in low

light conditions.

Attach light cord to transformer.

Be sure it is tight. Place

transformer in a secure area,

preferably under cover. While this

unit is rated for outdoor use, it

should not be fully submersed in

the water.