Water Warden WWG201 Operating instructions

Brand
Water Warden
Model
WWG201
Type
Operating instructions

This manual is also suitable for

Water Warden WWG201 is a self-closing pool gate designed to enhance pool safety. Its key features, as outlined in the installation manual, include:

  • Self-closing mechanism: The gate automatically closes and latches behind you, ensuring the pool area remains secure.

  • Magnetic lock: The lock requires a key to open, adding an extra layer of protection against unauthorized access to the pool.

  • Spring-loaded safety latches: These latches securely attach the gate to the adjoining fence sections, preventing accidental openings.

  • Easy installation: The gate comes with pre-drilled holes and detailed instructions, making the installation process straightforward.

Water Warden WWG201 is a self-closing pool gate designed to enhance pool safety. Its key features, as outlined in the installation manual, include:

  • Self-closing mechanism: The gate automatically closes and latches behind you, ensuring the pool area remains secure.

  • Magnetic lock: The lock requires a key to open, adding an extra layer of protection against unauthorized access to the pool.

  • Spring-loaded safety latches: These latches securely attach the gate to the adjoining fence sections, preventing accidental openings.

  • Easy installation: The gate comes with pre-drilled holes and detailed instructions, making the installation process straightforward.

WW
WATERWARDEN
PP OO OO LL SS AA FF EE TT YY PP RR OO DD UU CC TT SS
®
SELF-CLOSING POOL GATE
Installation Instructions
Always install gate PRIOR to installing fence sections.
LIST OF COMPONENTS:
• 1 WaterWarden Pool Gate with predrilled holes
• 2 gate posts, labeled "A" and "B" with predrilled holes
• 2 post reinforcement brackets with predrilled holes and black
securing screw
• 2 self-closing hinges with screws
• 1 top-pull magnetic lock with key lock and installation
instructions
• 4 inground plastic feet and caps
• 1 drilling template
• 2 spring-loaded Safety Latches
LIST OF TOOLS NEEDED FOR INSTALLATION:
• Utility knife or box cutter
• Rotary hammer drill
•
5/8” SDS masonry drill bit [If using a drilling guide, a 5/8” x 18”
masonry drill bit is needed]
• ¼” phillips head bit
• Extension cord (if necessary)
• Measuring tape
• Pencil or white chalk
• Hammer or rubber mallet
• Square and level or WaterWarden drill guide (available for
rental from dealer where fence was purchased)
INSTALLATION:
1. Identify Gate Post "A" and "ate Post "B". When installing the
gate posts, "A" should always be to the right of "B". Decide
where you will install the WaterWarden Pool Gate. The
gate should be installed in an easily accessible spot, on a
straight side of the pool. Do not install the gate around a
curve. The gate should always be installed with the mesh
material on the outside (non-pool side) of the fence
enclosure. Gate should open "out", or towards you, when
standing outside the fence.
2. Using the enclosed drilling template and illustration at the end
of this manual, mark the holes on the deck for the gate posts
A-1, A-2, B-1 and B-2. The holes for A-1 and B-1 should be
32" apart, measuring from the center of one in-ground pin to
the center of the second in-ground pin. The space between A-2
and B-2 should measure 39". Facing the pool, mark and label
the four post holes.
3. Lay a post reinforcing bracket over the spots labeled A-1 and
A-2. Align the holes in the post reinforcing bracket with the
marked spots. Using chalk or a pencil, mark through the third
hole on the right side of the bracket and label this spot "C".
Repeat with the second post reinforcing bracket for B-1 and
B-2. Mark the third hole and label it "D".
4. Drill through spots A-1, A-2, C, B-1, B-2 and D. Insert a
plastic sleeve into each hole and tap gently with a hammer or
mallet to ensure foot is flush with pool deck. Place each
bracket in its place and insert gate posts into their respective
brackets.
5. The holes marked "C" and "D" will be the first hole for the
installation of the adjoining fence section on either side of the
gate.
6. Continue installing the rest of the fence system. Refer to Basic
Installation Instructions included with each fence section for
details. Use the Drilling Template included with each fence
section to proceed. Attach the gate posts to the adjoining
fence section poles using the pre-drilled holes and the spring-
loaded safety latches. Use one safety latch for each gate post.
7. When all fence sections are installed with the correct tension,
attach the gate to the gate posts. Using the predrilled holes in
post "A-1", align with the predrilled holes in the gate. Lay
hinge over the holes with white label facing up, and fasten
with screws. Repeat for second hinge.
8. Attach magnetic lock to gate and gate post "B-1", using the
pre-drilled holes in gate post "B-1" and the installation
instructions found in the magnetic lock packet.
9. Adjust tension on hinges to ensure that gate is hanging
straight.
w w w . s m a r t p o o l . c o m
WW
WATERWARDEN
PP OO OO LL SS AA FF EE TT YY PP RR OO DD UU CC TT SS
®
  • Page 1 1
  • Page 2 2

Water Warden WWG201 Operating instructions

Brand
Water Warden
Model
WWG201
Type
Operating instructions
This manual is also suitable for

Water Warden WWG201 is a self-closing pool gate designed to enhance pool safety. Its key features, as outlined in the installation manual, include:

  • Self-closing mechanism: The gate automatically closes and latches behind you, ensuring the pool area remains secure.

  • Magnetic lock: The lock requires a key to open, adding an extra layer of protection against unauthorized access to the pool.

  • Spring-loaded safety latches: These latches securely attach the gate to the adjoining fence sections, preventing accidental openings.

  • Easy installation: The gate comes with pre-drilled holes and detailed instructions, making the installation process straightforward.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents