LevelOne POR-1102-V1 User manual

LevelOne
Brand
LevelOne
Model
POR-1102-V1
Category
PoE adapters
Type
User manual

This manual is also suitable for

LevelOne POR-1102-V1 is a 2-port outdoor PoE repeater that extends the reach of your PoE devices. It's perfect for taking Ethernet to areas such as roof tops, factory floors, airports, and large warehouses. POR-1102-V1 is IP65-compliant, meaning it is weatherproof from snow, rain, typhoons, desert heat, etc. This PoE Repeater is up to the challenge for deployment in any harsh weather condition! As a PoE Repeater, POR-1102-V1 receives all power from the Power Sending Equipment (PSE), for example, a PoE switch. This means that POR-1102-V1 uses no external power supply.

LevelOne POR-1102-V1 is a 2-port outdoor PoE repeater that extends the reach of your PoE devices. It's perfect for taking Ethernet to areas such as roof tops, factory floors, airports, and large warehouses. POR-1102-V1 is IP65-compliant, meaning it is weatherproof from snow, rain, typhoons, desert heat, etc. This PoE Repeater is up to the challenge for deployment in any harsh weather condition! As a PoE Repeater, POR-1102-V1 receives all power from the Power Sending Equipment (PSE), for example, a PoE switch. This means that POR-1102-V1 uses no external power supply.

2
2-Port
Outdoor PoE Repeater
POR-1102
H/W Version: 1
Extend the reach of your PoE devices
POR-1102 is the perfect accessory to increase your
Power over Ethernet network performance. As a
2-port repeater, it’s now easier to add more devices to
the network for greater deployment exibility.
Simple yet durable, no software required
As a PoE Repeater, POR-1102 receives all power from
the Power Sending Equipment (PSE), for example,
a PoE switch. This means that POR-1102 uses no
external power supply, making it the most exible
option for system integrators looking for an easy,
aordable solution to increase the distance to the
attached devices.
Applications
POR-1100 is the perfect solution for taking Ethernet
to areas such as roof tops, factory oors, airports, and
large warehouses.
IP65-compliant
POR-1102 is IP65-compliant meaning it is
weatherproof from snow, rain, typhoons, desert
heat, etc. This PoE Repeater is up to the challenge for
deployment in any harsh weather condition!
POI-1102 can also work together with LevelOne’s
high-power PoE injector, POI-4000. This can extend
Ethernet connectivity an additional 100 meters for
high power PD devices, such as 18 W IP Cameras or
other devices that require power greater than 15.4 W.
Key Features
- Extends Cat.5 cable installations to beyond 100
meters
- 2-Port Ethernet Power Sourcing Equipment
(PSE)
- Forwards Power over Ethernet (PoE) to remote
device
- No Power required
- Fully transparent-no restrictions to network trac
- Supports all network devices
- IP65 weatherproof design
POI-4000
High-power PoE Injector
Works Well With
1. RJ45 In
2. RJ45 Out
POR-0102
2-port PoE Repeater
1 2 2
3
PoE PD/PSE
www.level1.com
I
one world_one brand_one level_
Ethernet Interface:
IEEE 802.3x, Auto-Detection for 10/100BASE-T and full/half
duplex
Automatic MDIX function
PoE Input Port: RJ-45 Connector x 1
PoE Output Port: RJ-45 Connector x 2
Port-based VLAN function for LAN ports
Power:
IEEE 802.3af-Compliant with voltage within 44~57 Volt
Maximum Power Dissipation: 2.5 Watts
Technical Specication
Regulations & Approvals:
FCC Rules Part 15
CE
Physical Dimension: (L x W x H)
180mm x 165mm x 95mm
Operating Environment:
Humidity: 5% to 95% non-condensing
Temperature: 0~50 °C
Product Diagram
PD 1 + PD 2 ≤ 16.5w
Ethernet Cable (RJ-45)
PoE
Non-PoE Switch POI-4000
POR-1100
100m
100m 100m
FCS-5011
POR-1102
100m
100m 100m
PD 1 PD 2
POR-1100POR-1100
FCS-5011
Note: These distances are typical results when used with 18~19Ω 24 AWG Cat.5 Cable
Installation Notes
UP UP UP
4
Order Information POR-1102: 2-Port Outdoor PoE Repeater
Package Contents POR-1102 x 1
QIG x 1
Mounting Kit x 1
All mentioned brand names are registered trademarks and property of their owners. Technical specications are subject to change without notice.
© Copyright Digital Data Communications GmbH. All Rights Reserved.
V1.0
  • Page 1 1
  • Page 2 2
  • Page 3 3

LevelOne POR-1102-V1 User manual

LevelOne
Brand
LevelOne
Model
POR-1102-V1
Category
PoE adapters
Type
User manual
This manual is also suitable for

LevelOne POR-1102-V1 is a 2-port outdoor PoE repeater that extends the reach of your PoE devices. It's perfect for taking Ethernet to areas such as roof tops, factory floors, airports, and large warehouses. POR-1102-V1 is IP65-compliant, meaning it is weatherproof from snow, rain, typhoons, desert heat, etc. This PoE Repeater is up to the challenge for deployment in any harsh weather condition! As a PoE Repeater, POR-1102-V1 receives all power from the Power Sending Equipment (PSE), for example, a PoE switch. This means that POR-1102-V1 uses no external power supply.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents