2
2-Port
Outdoor PoE Repeater
POR-1102
H/W Version: 1
Extend the reach of your PoE devices
POR-1102 is the perfect accessory to increase your
Power over Ethernet network performance. As a
2-port repeater, it’s now easier to add more devices to
the network for greater deployment exibility.
Simple yet durable, no software required
As a PoE Repeater, POR-1102 receives all power from
the Power Sending Equipment (PSE), for example,
a PoE switch. This means that POR-1102 uses no
external power supply, making it the most exible
option for system integrators looking for an easy,
aordable solution to increase the distance to the
attached devices.
Applications
POR-1100 is the perfect solution for taking Ethernet
to areas such as roof tops, factory oors, airports, and
large warehouses.
IP66-compliant
POR-1102 is IP66-compliant meaning it is
weatherproof from snow, rain, typhoons, desert
heat, etc. This PoE Repeater is up to the challenge for
deployment in any harsh weather condition!
POI-1102 can also work together with LevelOne’s
high-power PoE injector, POI-4000. This can extend
Ethernet connectivity an additional 100 meters for
high power PD devices, such as 18 W IP Cameras or
other devices that require power greater than 15.4 W.
Key Features
- Extends Cat.5 cable installations to beyond 100
meters
- 2-Port Ethernet Power Sourcing Equipment
(PSE)
- Forwards Power over Ethernet (PoE) to remote
device
- No Power required
- Fully transparent-no restrictions to network trac
- Supports all network devices
- IP66 weatherproof design
POI-4000
High-power PoE Injector
Works Well With
1. RJ45 In
2. RJ45 Out
POR-0102
2-port PoE Repeater
1 2 2
3
PoE PD/PSE
www.level1.com
I
one world_one brand_one level_
Ethernet Interface:
IEEE 802.3x, Auto-Detection for 10/100BASE-T and full/half
duplex
Automatic MDIX function
PoE Input Port: RJ-45 Connector x 1
PoE Output Port: RJ-45 Connector x 2
Port-based VLAN function for LAN ports
Power:
IEEE 802.3af-Compliant with voltage within 44~57 Volt
Maximum Power Dissipation: 2.5 Watts
Technical Specication
Regulations & Approvals:
FCC Rules Part 15
CE
Physical Dimension: (L x W x H)
180mm x 165mm x 95mm
Operating Environment:
Humidity: 5% to 95% non-condensing
Temperature:0~50 °C
Product Diagram
Order Information POR-1102: 2-Port Outdoor PoE Repeater
Package Contents POR-1102 x 1, QIG x 1, Mounting Kit x 1
All mentioned brand names are registered trademarks and property of their owners. Technical specications are subject to change without notice.
© Copyright Digital Data Communications GmbH. All Rights Reserved.
V1.0
PD 1 + PD 2 ≤ 16.5w
Ethernet Cable (RJ-45)
PoE
Non-PoE Switch POI-4000
POR-1100
100m
100m 100m
FCS-5011
POR-1102
100m
100m 100m
PD 1 PD 2
POR-1100POR-1100
FCS-5011
Note: These distances are typical results when used with 18~19Ω 24 AWG Cat.5 Cable
-
1
-
2
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Related papers
-
LevelOne 2-Port Outdoor PoE Repeater User manual
-
-
LevelOne POC-4000 Specification
-
-
LevelOne WAP-0008 Quick start guide
-
LevelOne POR-0100 Datasheet
-
-
LevelOne POT-1110 Datasheet
-
LevelOne POI-2002 Datasheet
-
LevelOne POC-6000 Datasheet
Other documents
-
level one POR 1100 Outdoor PoE Repeater Operating instructions
-
Conceptronic POR-1100 User guide
-
Equip POR-1100 Operating instructions
-
-
Equip POR-1200 Operating instructions
-
Conceptronic POR-1200 Owner's manual
-
Conceptronic POR 1200 Outdoor PoE Plus Repeater Operating instructions
-
-
level one POR-1200 User guide
-