LevelOne POR-0100 Datasheet

POR-0100
LevelOne
Brand
LevelOne
Model
POR-0100
Category
PoE adapters
Type
Datasheet

LevelOne POR-0100 is a PoE repeater that extends the reach of PoE devices beyond the traditional 100-meter limit. It receives power from the Power Sending Equipment (PSE), eliminating the need for an external power supply. With two RJ-45 ports, it accepts power and data for the first 100 meters and boosts and extends power and data for an additional 100 meters. Ideal for large IP surveillance networks, outdoor access points, and high-power PoE devices, it supports all network devices compatible with the universal IEEE 802.3af PoE Standard.

LevelOne POR-0100 is a PoE repeater that extends the reach of PoE devices beyond the traditional 100-meter limit. It receives power from the Power Sending Equipment (PSE), eliminating the need for an external power supply. With two RJ-45 ports, it accepts power and data for the first 100 meters and boosts and extends power and data for an additional 100 meters. Ideal for large IP surveillance networks, outdoor access points, and high-power PoE devices, it supports all network devices compatible with the universal IEEE 802.3af PoE Standard.

PoE Repeater
POR-0100
H/W Version: 1
Extend the reach of your PoE devices
For system integrators looking for a professional
solution to help extend their PoE network,
POR-0100 is the perfect accessory to increase
your Power over Ethernet network performance.
Normal cable runs only reach 100 meters, but
with POR-0100 installers can extend the PoE
network performance up to 00 meters!
Simple yet durable, no software required
As a PoE Repeater, POR-0100 receives all
power from the Power Sending Equipment
(PSE), for example, a PoE switch. This means
that POR-0100 uses no external power supply,
making it the most exible option for system
integrators looking for an easy, affordable
solution to increase the distance to the attached
devices. POR-0100 has  RJ-45 ports for easy
deployment, the “IN” port that accepts the
power and data for the rst 100 meters, and
the “OUT” port that boosts and extends the
power and data an additional 100 meters. With
a durable metal housing, POR-0100 ts into any
tight deployments.
Applications
POR-0100 works great for large IP surveillance
networks with many cameras deployed
throughout a building or campus. It is also an
ideal solution for outdoor access points that are
located far from the network control center.
POI-0100 can also work together with LevelOne’
s high-power PoE injector, POI-4000. This can
extend Ethernet connectivity an additional 100
meters for high power PD devices, such as 18 W
IP Cameras or other devices that require power
greater than 15.4 W.
Key Features
- Extends Cat.5 cable installations to beyond 100
meters
- Forwards power over Ethernet ( PoE) to
remote device
- No Power required
- Fully transparent-no restrictions to network
trafc
- Simple to install-works instantly
- Supports all network devices Compatible with
universal IEEE 80.3af PoE Standard
POI-2000
PoE Injector
Works Well With
1. LED Indicators
. RJ45 IN
3. RJ45 OUT
FCS-3021
PoE Dome Network Camera
w/ Audio
31
3
PoE PD/PSE
www.level1.com
I
one world_one brand_one level_
LAN Interface:
IEEE 80.3x, Auto-Detection for 10/100 BaseT and full/
half duplex
Standard Straight-through, or Cross-over CAT 5 Cable
Automatic MDIX function
RJ-45 Connector x 
LED Indicators:
POWER: Power is ON
LAN IN: Data Activity of LAN IN Port
LAN OUT: Data Activity of LAN OUT Port
Technical Specication
Regulations & Approvals:
FCC Rules Part 15
CE
Physical Dimension:
W x D x H: 10 x 90 x 8 (mm)
Operating Environment :
Humidity : 5% to 95% non-condensing
Temperature: 0~50°C
Product Diagram
Order Information POR-0100: PoE Repeater
Package Contents POR-0100 x 1
QIG x 1
All mentioned brand names are registered trademarks and property of their owners. Technical specications are subject to change without notice.
© Copyright 008 Digital Data Communications GmbH. All Rights Reserved.
POR-0100
Note: These distances are typical results when used with18~19
Ω
4AWG Cat5 Cable.
POR-0100
Standard (15.4W)
PoE Device (4.3W max)
100m
100m
100m
300m
  • Page 1 1
  • Page 2 2

LevelOne POR-0100 Datasheet

POR-0100
LevelOne
Brand
LevelOne
Model
POR-0100
Category
PoE adapters
Type
Datasheet

LevelOne POR-0100 is a PoE repeater that extends the reach of PoE devices beyond the traditional 100-meter limit. It receives power from the Power Sending Equipment (PSE), eliminating the need for an external power supply. With two RJ-45 ports, it accepts power and data for the first 100 meters and boosts and extends power and data for an additional 100 meters. Ideal for large IP surveillance networks, outdoor access points, and high-power PoE devices, it supports all network devices compatible with the universal IEEE 802.3af PoE Standard.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents