LevelOne POR-0100-V1 Datasheet

LevelOne
Brand
LevelOne
Model
POR-0100-V1
Category
PoE adapters
Type
Datasheet

This manual is also suitable for

LevelOne POR-0100-V1 is a PoE Repeater that helps to extend the reach of your PoE devices. It receives all power from the Power Sending Equipment (PSE), for example, a PoE switch, meaning that it uses no external power supply. POR-0100 has 2 RJ-45 ports for easy deployment: the “IN” port that accepts the power and data for the first 100 meters, and the “OUT” port that boosts and extends the power and data an additional 100 meters. With a durable metal housing, POR-0100 fits into any tight deployments.

LevelOne POR-0100-V1 is a PoE Repeater that helps to extend the reach of your PoE devices. It receives all power from the Power Sending Equipment (PSE), for example, a PoE switch, meaning that it uses no external power supply. POR-0100 has 2 RJ-45 ports for easy deployment: the “IN” port that accepts the power and data for the first 100 meters, and the “OUT” port that boosts and extends the power and data an additional 100 meters. With a durable metal housing, POR-0100 fits into any tight deployments.

2
PoE Repeater
POR-0100
H/W Version: 1
Extend the reach of your PoE devices
For system integrators looking for a professional
solution to help extend their PoE network, POR-0100
is the perfect accessory to increase your Power over
Ethernet network performance. Normal cable runs
only reach 100 meters, but with POR-0100 installers
can extend the PoE network performance up to 200
meters!
Simple yet durable, no software required
As a PoE Repeater, POR-0100 receives all power from
the Power Sending Equipment (PSE), for example,
a PoE switch. This means that POR-0100 uses no
external power supply, making it the most exible
option for system integrators looking for an easy,
aordable solution to increase the distance to the
attached devices. POR-0100 has 2 RJ-45 ports for easy
deployment, the “IN” port that accepts the power and
data for the rst 100 meters, and the “OUT” port that
boosts and extends the power and data an additional
100 meters. With a durable metal housing, POR-0100
ts into any tight deployments.
Applications
POR-0100 works great for large IP surveillance
networks with many cameras deployed throughout
a building or campus. It is also an ideal solution for
outdoor access points that are located far from the
network control center.
POR-0100 can also work together with LevelOne’s
high-power PoE injector, POI-4000. This can extend
Ethernet connectivity an additional 100 meters for
high power PD devices, such as 18 W IP Cameras or
other devices that require power greater than 15.4 W.
Key Features
- Extends Cat.5 cable installations to beyond 100
meters
- Forwards Power over Ethernet (PoE) to remote
device
- No Power required
- Fully transparent-no restrictions to network trac
- Simple to install-works instantly
POI-4000
High-power PoE Injector
Works Well With
1. LED Indicators
2. RJ-45 In
3. RJ-45 Out
POR-1100
Outdoor PoE Repeater
2 31
3
PoE PD/PSE
www.level1.com
I
one world_one brand_one level_
LAN Interface:
IEEE 802.3x, Auto-Detection for 10/100BASE-T and full/half
duplex
Standard Straight-through, or Cross-over CAT 5 Cable
Automatic MDIX function
RJ-45 Connector x 2
LED Indicators:
POWER: Power is ON
LAN IN: Data Activity of LAN IN Port
LAN OUT: Data Activity of LAN OUT Port
Technical Specication
Regulations & Approvals:
FCC Rules Part 15
CE
Physical Dimension: (L x W x H)
120mm x 90mm x 28mm
Operating Environment :
Humidity : 5% to 95% non-condensing
Temperature: 0~50°C
Product Diagram
Order Information POR-0100: PoE Repeater
Package Contents POR-0100 x 1
QIG x 1
All mentioned brand names are registered trademarks and property of their owners. Technical specications are subject to change without notice.
© Copyright Digital Data Communications GmbH. All Rights Reserved.
POR-0100
Note: These distances are typical results when used with18~19Ω 24AWG Cat5 Cable.
POR-0100
Standard (15.4W)
PoE Device (4.3W max)
100m
100m
100m
300m
PoE
V1.0
  • Page 1 1
  • Page 2 2

LevelOne POR-0100-V1 Datasheet

LevelOne
Brand
LevelOne
Model
POR-0100-V1
Category
PoE adapters
Type
Datasheet
This manual is also suitable for

LevelOne POR-0100-V1 is a PoE Repeater that helps to extend the reach of your PoE devices. It receives all power from the Power Sending Equipment (PSE), for example, a PoE switch, meaning that it uses no external power supply. POR-0100 has 2 RJ-45 ports for easy deployment: the “IN” port that accepts the power and data for the first 100 meters, and the “OUT” port that boosts and extends the power and data an additional 100 meters. With a durable metal housing, POR-0100 fits into any tight deployments.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents