2. LBL Lighting
  3. LW639BZLEDW
LW639BZLEDW

LBL Lighting LW639BZLEDW Installation guide

  • Hello! I am an AI chatbot trained to assist you with the LBL Lighting LW639BZLEDW Installation guide. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
  • What electrical boxes can mount the fixture?
    What size screw is used to attach the mounting plate to the electrical box?
    What is the purpose of the set screws at the base of the fixture?
    How many anchors are used to secure the mounting plate to the wall?
    What type of wire nuts are used to connect the fixture wires to the power line wires?
    What is the recommended sealant for wet locations?
1
Installation Instructions for
Pier 60, Pier 60 Medium, Pier 60 Large Outdoor
980PIER60O
Install the Fixture
GP I :ENERAL RODUCT NFORMATION
This product is suitable for wet locations.
This product can mount either to a 4” square electrical box with a
round plaster ring or an octagon electrical box.
With the Allen wrench provided, back out (do not fully
remove) the set screws at the base of the fixture.
Remove the mounting plate from the back of the
fixture.
Attach the mounting plate to the electrical box using
the two #8-32 screws provided.
ALLEN WRENCH
SET SCREW
MOUNTING
PLATE
MOUNTING
PLATE
#8-32 SCREW
1
3
1.1
Outdoor
1A 1B
2
LW639_LEDW
1
1
3
3
OD826_LEDW
OD826_LEDW
CAUTION - RISK OF FIRE
This product must be installed in accordance with
the applicable installation code by a person familiar
with the construction and operation of the product
and the hazards involved.
Use minimum 90°c supply conductors.
2
1C
4
5
6
ANCHOR
ANCHOR
1D
SCREW
SCREW
WASHER
WASHER
Verify that the mounting plate is level before continuing.
Line up an anchor tip with the center a mounting plate
hole, and push the anchor into the wall up to the
threads.
Screw the anchors in the rest of the way with a Phillips-
head screwdriver.
Repeat steps 5-6 for the other anchor(s).
6
67
Slide a #8 screw through a washer and screw it into an
anchor.
Repeat for the other anchor(s) to secure the mounting
plate to the wall.
68
69
NOTE: Pier 60 Large has 6 anchors to further support
the fixture.
1
3
2
5 6
4
3
Connect the mounting plate ground wire to a suitable
ground according to local electrical codes.
Connect the white (blue) fixture wire to the neutral
power line wire with a wire nut.
Connect the black (brown) fixture wire to the hot power
line wire with a wire nut.
Hook the top of the fixture to the top of the mounting
plate and swing the bottom of the fixture toward the
plate until it is flush with the wall.
With the allen wrench, tighten the set screws at the
bottom of the fixture to secure it to the mounting plate.
1E
1
1
1F
12
13
10
11
14
10
11
12
13
14
1G
15
For wet locations, caulk around the fixture with
waterproof construction sealant.
4
SAVETHESE INSTRUCTIONS!
7400 Linder Ave, Skokie, IL 60077
800.323.3226 - 847.626.6300
www.lbllighting.com
© 2014 LBL Lighting.All rights reserved.The "LBL Lighting" graphic is a
registered trademark of LBL Lighting. LBL Lighting reserves the right to
change specifications for product improvements without notification.
A Generation Brands Company
/