LBL Lighting OD736BZLEDW Installation guide

Type
Installation guide

LBL Lighting OD736BZLEDW is a suitable light fixture for wet locations, making it ideal for both indoor and outdoor use. It can be mounted to a 4" square electrical box with a round plaster ring or an octagon electrical box. The fixture requires professional installation by a qualified electrician, and the power to the electrical box must be turned off before installation. Refer to the detailed installation instructions for guidance on mounting the fixture securely and connecting the wires correctly.

LBL Lighting OD736BZLEDW is a suitable light fixture for wet locations, making it ideal for both indoor and outdoor use. It can be mounted to a 4" square electrical box with a round plaster ring or an octagon electrical box. The fixture requires professional installation by a qualified electrician, and the power to the electrical box must be turned off before installation. Refer to the detailed installation instructions for guidance on mounting the fixture securely and connecting the wires correctly.

1
Installation Instructions for
Upstate 11 Outdoor
980UPSTA11O
CAUTION - RISK OF FIRE
This product requires installation by a qualified
electrician. Before installing be sure to read all
instructions and TURN THE POWER TO THE
ELECTRICAL BOX OFF.
Install the Fixture
GP I :ENERAL RODUCT NFORMATION
This product is suitable for wet locations.
This product can mount either to a 4” square electrical box with a
round plaster ring or an octagon electrical box.
With the Allen wrench provided, back out (do not fully
remove) the set screws at the bottom of the fixture.
Remove the mounting plate from the back of the
fixture.
Attach the mounting plate to the electrical box using
the two #8-32 screws provided.
MOUNTING
PLATE
#8-32 SCREW
1
3
1.0
Outdoor
1A 1B
2
OD736_LED
3
3
MOUNTING
PLATE
ALLEN WRENCH
SET SCREW
1
1
2
1C
4
5
6
ANCHOR
ANCHOR
1D
SCREW
SCREW
WASHER
WASHER
Verify that the mounting plate is level before continuing.
Line up an anchor tip with the center of a mounting
plate hole, and push the anchor into the wall up to the
threads.
Screw the anchors in the rest of the way with a Phillips-
head screwdriver.
Repeat steps 5-6 for the other anchor.
6
67
Slide a #8 screw through a washer and screw it into an
anchor.
Repeat for the other anchor to secure the mounting
plate to the wall.
68
69
3
Connect the mounting plate ground wire to a suitable
ground in accordance with local electrical codes.
Connect the white fixture wire to the neutral power line
wire with a wire nut.
Connect the black fixture wire to the hot power line
wire with a wire nut.
Hook the top of the fixture to the top of the mounting
plate and swing the bottom of the fixture toward the
plate until it is flush with the wall.
With the allen wrench, tighten the set screws at the
bottom of the fixture to secure it to the mounting plate.
1E
1F
10
11
12
13
14
12
13
10
11
14
15
For wet locations, caulk around the base with
waterproof construction sealant.
1G
4
SAVETHESE INSTRUCTIONS!
7400 Linder Ave, Skokie, IL 60077
800.323.3226 - 847.626.6300
www.lbllighting.com
© 2013 LBL Lighting.All rights reserved.The "LBL Lighting" graphic is a
registered trademark of LBL Lighting. LBL Lighting reserves the right to
change specifications for product improvements without notification.
A Generation Brands Company
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4

LBL Lighting OD736BZLEDW Installation guide

Type
Installation guide

LBL Lighting OD736BZLEDW is a suitable light fixture for wet locations, making it ideal for both indoor and outdoor use. It can be mounted to a 4" square electrical box with a round plaster ring or an octagon electrical box. The fixture requires professional installation by a qualified electrician, and the power to the electrical box must be turned off before installation. Refer to the detailed installation instructions for guidance on mounting the fixture securely and connecting the wires correctly.

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI