World Imports WI7426589 Installation guide

ASSEMBLY INSTRUCTION

74265-89

Note: Please consult a qualified electrician if you are not certain of the installation

CAUTION:

Before starting the installation, disconnect the power by turning off the circuit breaker or

by removing the fuse at the fuse box.

1. Strip 3/4” of insulation from wire ends. Twist stripped ends together with pliers black to black and

white to white. Snip ends. Attach copper wire to ground wire. Attach wire nuts. Tap nuts and wires

together.

2. Insert all wires into the post and mount fixture on top.

3. Tighten screws until the fixture head is secured to the post.

4. Thread long nipple into fixture body. Install glass shade onto fixture body.

5. Install light bulbs. Use only the specified type bulbs and maximum rated wattage or less.(bulbs not

included)

6. Place the metal ring, cap and roof over the long nipple and use finial to tighten.

Finial

Cap

Roof

Metal Ring

Bulb

Long Nipple

Glass Shade

Post Cup

Download PDF