Task Force Tips PA2-52MM, PA1, PA1-52MM, PA2, PA2BF-L, PA3-EV Operating instructions

  • Hello! I have reviewed the user manual for the EV Firefighting tool, focusing on its assembly for vehicle cooling/extinguishment. The document outlines component connections and important safety precautions, particularly concerning energized electrical equipment. I am ready to assist with any questions you may have about this manual.
  • What is the Transformer EV used for?
    Who is this equipment intended for?
    What should I avoid doing with this equipment regarding electrical equipment?
©Copyright Task Force Tips LLC 2022 LIS-013 December 21, 2022 Rev00
Distributor
Nozzle
3 Port
Junction Block
Extension
Tube
Extension
Tube
Extension
Tube
Rotary Valve
Coupling
Extension
Tube
----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
TRANSFORMER EV
Assemble the components in the configuration shown for EV under vehicle cooling/extinguishment by threading the
components together until hand-tight, following the assembly instructions in the manual (LIS-011).
WARNING
WARNING!
Refer to the manual for complete safety information and operating instructions.
Application of water or foam solutions on energized electrical equipment could cause electrocution. Assume circuits are energized until
confirmed to be de-energized. Do not apply water or foam to energized electrical equipment.
This equipment is intended for use by trained personnel for firefighting. Use of this equipment for other purposes may involve hazards not
addressed by the operator manual. Seek appropriate guidance and training to reduce risk of injury.
Distributor
Nozzle
3 Port
Junction Block
Extension
Tube
Extension
Tube
Extension
Tube
Rotary Valve
Coupling
Extension
Tube
----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
TRANSFORMER EV
Assemble the components in the configuration shown for EV under vehicle cooling/extinguishment by threading the
components together until hand-tight, following the assembly instructions in the manual (LIS-011).
WARNING
Refer to the manual for complete safety information and operating instructions.
Application of water or foam solutions on energized electrical equipment could cause electrocution. Assume circuits are energized until
confirmed to be de-energized. Do not apply water or foam to energized electrical equipment.
This equipment is intended for use by trained personnel for firefighting. Use of this equipment for other purposes may involve hazards not
addressed by the operator manual. Seek appropriate guidance and training to reduce risk of injury.
Distributor
Nozzle
3 Port
Junction Block
Extension
Tube
Extension
Tube
Extension
Tube
Rotary Valve
Coupling
Extension
Tube
©Copyright Task Force Tips LLC 2022 LIS-013 December 21, 2022 Rev00
©Copyright Task Force Tips LLC 2022 LIS-013 December 21, 2022 Rev00
TRANSFORMER EV
Assemble the components in the configuration shown for EV under vehicle cooling/extinguishment by threading the
components together until hand-tight, following the assembly instructions in the manual (LIS-011).
WARNING
WARNING!
Refer to the manual for complete safety information and operating instructions.
Application of water or foam solutions on energized electrical equipment could cause electrocution. Assume circuits are energized until
confirmed to be de-energized. Do not apply water or foam to energized electrical equipment.
This equipment is intended for use by trained personnel for firefighting. Use of this equipment for other purposes may involve hazards not
addressed by the operator manual. Seek appropriate guidance and training to reduce risk of injury.
/