ROOMS TO GO 34028008 Assembly Instructions

ROOMS TO GO
Brand
ROOMS TO GO
Model
34028008
Type
Assembly Instructions

This manual is also suitable for

CANYON FURNITURE COMPANY
A.- (1) LANDSCAPE MIRROR D.- (1) 6 DRAWER DRESSER
B.- (2) 36" METAL SUPPORTS
C.- (4) 1 1/4" SCREWS
C.- (4) 1 1/4" SCREWS
1.-UNPACK THE LANDSCAPE MIRROR (A) AND REMOVE THE 1 1/4" SCREWS&36" METAL SUPPORTS INSTALLED IN THE LANDSCAPE MIRROR,USING YOUR PHILLIPS
SCREWDRIVER
(FIG.1)
, THEN SLIDE DOWN BOTH 36" METAL SUPPORTS AND REPLACED CONNECTING USING REMOVAL SCREWS,
SEE FIG.2.
2.- TAKE THE 6 DRAWER DRESSER (D) AND PLACE IT NEAR TO THE FINAL POSITION IN THE ROOM.
3.- CAREFULLY PLACE LANDSCAPE MIRROR ON THE 6 DRAWER DRESSER AND LINE UP CENTER, SEE FIG.3
4.- ATTACH THE 36" METAL SUPPORTS TO 6 DRW DRESSER,BY ALIGNING 36" METAL SUPPORTS WITH THE HOLES IN THE DRESSER, ATTACH WITH 1 1/4" SCREWS
USING YOUR SCREWDRIVER TIGHT ALL SCREWS,
SEE FIG.3
6 DRAWER DRESSER WITH LANDSCAPE MIRROR ASSEMBLY
PHILLIPS SCREWDRIVER
(NOT INCLUDED)
HARDWARE PACK (HPK00124-0)
THANK YOU FOR YOUR PURCHASE ! PLEASE CONTACT YOUR RETAIL STORE WITH SERVICE OR PARTS REPLACEMENT REQUEST.
LANDSCAPE MIRROR ASSEMBLY INSTRUCTIONS (28-300)
6 DRAWER DRESSER BOX (28-206)
COTTAGE COLORS COLLECTIOIN
LANDSCAPE MIRROR BOX (28-300)
LIST OF CONTENTS
TOOLS NEEDED
DRESSER WITH MIRROR
28-206 6 DRAWER DRESSER
28-300 LANDSCAPE MIRROR
KEEP THE INSTRUCTION SHEET
FOR FUTURE REFERENCES
A
B
C
D
1 1/4" SCREWS
FIG.1
FIG.2
FIG.3
TO ASSEMBLE THIS PRODUCTS
REQUIRES
TWO PERSONS
IMPORTANT NOTES :
HANDLE THE MIRROR WITH CARE, GLASS IS
FRAGILE. BEFORE YOU BEGIN
YOUR PROJECT, COMPLETELY READ THE
ASSEMBLY INSTRUCTIONS
TOOLS NEEDED :
PHILLIPS HEAD SCREWDRIVER
(NOT INCLUDED)
HARDWARE PACK
HPK00124-0
RIGHT POSITION FOR
METAL AND SCREWS
REV 01 02/04/2019 PAGE 1 OF 1 KIS01181-0
  • Page 1 1

ROOMS TO GO 34028008 Assembly Instructions

ROOMS TO GO
Brand
ROOMS TO GO
Model
34028008
Type
Assembly Instructions
This manual is also suitable for
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents