2. Fishbone Offroad
  3. FB24086

Fishbone Offroad FB24086 Installation guide

  • Hello! I've reviewed the installation instructions for the FISHBONE OFFROAD tube doors, models FB24086 and FB24087, designed for Jeep JL Wranglers. The document outlines the simple installation process, including the required tools and how to properly secure the doors and adjust the latch. I'm ready to answer your questions about this product and the installation procedure.
  • What tools are required for installation?
    What is included in the kit?
    How do I install the tube doors?
FB24086 & FB24087
Jeep® JL Wrangler
Tube Doors – 4DR and 2DR
2408600
REQUIRED TOOLS
13mm Socket/wrench
4mm Allen wrench
KIT CONTAINS
Stainless nyloc nut (2DR)
Stainless nyloc nut (4DR)
QTY
4
8
1) REMOVE DOORS
Begin by removing your OEM or existing doors. Take
care not to scratch the doors when removing and
place them on a soft surface to protect the paint.
2) INSTALL TUBE DOORS
Insert the tube doors into the Jeep’s body hinges
and secure with supplied nyloc nuts using a 13mm
wrench or socket. Do not overtighten as this may
make the door hard to open.
FB24086 – 4DR (SHOWN)
FB24087 – 2DR (FRONTS ONLY)
FB24086 & FB24087
Jeep® JL Wrangler
Tube Doors – 4DR and 2DR
2 2408600
3) ATTACH DOOR CATCH STRAP
Install the attached door catch strap to the hook
inside the Jeep.
4) ADJUST LATCH MECHANISM
Using a 4mm allen wrench, adjust the latch
mechanism until the door closes smoothly.
5) ENJOY YOUR FISHBONE OFFROAD TUBE DOORS!
Front door shown
FB24022 only – rear door shown
/