PERLESMITH PSSF1 Installation guide

Type
Installation guide
V2.0
Thank you for choosing our product! We strive to provide the best quality
and services for our customers. Would you kindly share your experience
on Amazon if you are satisfied? Should you have any issues, please don't
hesitate to contact us.
Telephone:800-5566-806 Mon-Fri 10am - 6pm (PST) (USA) (CAN)
Email:[email protected] (US/CA/DE/UK/FR/IT/ES/JP/AU)
Contents
3.2mm (1/8 in.) (5/16 in.)
A
M
1
M8x30(x4)
E
F G H I
J K O
8
Concrete Anchor
Step 1A Wall Plate Install
These anchors are for concrete or brick walls ONLY. DO NOT use them in
drywall or wood studs.
O
Anchor
1A-1
1A-2
1A-3
5/16 in.
8 mm
8
Install wall plate using lag bolts F,
washers G and anchors O. Tighten
the lag bolts until they are pulled
firmly against the wall plate.
5/16
F
G
O
2
2 in.(50mm).
2 in.(50mm)
1B-1
1B-2
Step 1B Wall Plate Install (Wood stud)
These anchors are for concrete or brick walls ONLY. DO NOT use them in
drywall or wood studs.
Den Bolzen positionieren. Überprüfen und
markieren Sie die Mitte des Stollens, indem Sie
die Stollenkanten mit einer Ahle, einem
Dünnschwanz oder einem Stegfinder suchen.
3
Position the wall panel at the desired height
and align the holes with the centerline of the
stud. Level wall plate and mark holes.
1B-3
1B-4
ST6
F
G
4
3/8
1/8 in.
1/8
(3.2mm)
(50mm)
3.2
(50mm)
A, C
H
B, D,E
J, K
H
5
I
G
J, K
H
Use wrench to lock televison into wall mount
Place TV bracket over your television hole pattern.
Attach using appropriate screw and square washer
combination for your TV.
6
A-E
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7

PERLESMITH PSSF1 Installation guide

Type
Installation guide

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

in other languages