PERLESMITH PSLLK1 Installation guide

Brand: PERLESMITH

Model: PSLLK1

Type: Installation guide

Thank you for choosing our product! We strive to provide the best

quality and services for our customers. Would you kindly share

your experience on Amazon if you are satisﬁed? Should you have

any issues, please don't hesitate to contact us.

Telephone：

1-800-556-6806 Mon-Fri 10am - 6pm (PST) (USA) (CAN)

Email：

[email protected] (US/CA/DE/UK/FR/IT/ES/AU)

V1.0

PSLLK1

TV Bracket

Level

Supplied Parts

Tools Needed (Not lncluded)

Stud Finder Tape Measure

Pencil Drill

5.5mm

Wood Drill

10mm

Concrete Drill

13mm

Socket Wrench

Screwdriver

Hammer

IMPORTANT SAFETY INFORMATION

•Check package contents against Supplied Parts and Hardware List to assure that all

components were received undamaged. Do not use damaged or defective parts. lf you

require replacement parts, contact customer service at [email protected]

•Not all parts and hardware included will be used.

•Carefully read all instructions before attempting installation. If you do not understand

the instructions or have any concerns or questions, please contact customer service at

[email protected]

•This product may contain moving parts. Use with caution.

•Do not use this product for any purpose or in any conﬁguration not explicitly speciﬁed

in this instruction. We hereby disclaim any liability for injury or damage arising from

incorrect assembly, incorrect mounting, or incorrect use of this product.

•DO NOT INSTALL INTO DRYWALL ALONE.

•Please check www.perlesmith.com for more products and company information.

Wall Plate

Washers

10mm

22mm

2.5mm

Supplied Hardware

Hardware for Attaching the Wall Plate to Wall

These anchors are for

concrete or brick walls

ONLY. DO NOT use them

in drywall or wood studs.

CAUTION!

Wall

Anchor

Lag Bolts

ST8X65

A1 A2

Hardware for Attaching TV Brackets to TV

M6/M8

M6 x 15mm

M6 x 35mm

M8 x 25mm

M8 x 35mm

Washers

Spacers

TV Screws

[Only one size ﬁts your TV]

[If necessary]

M8 x 50mm

Step 1

Check TV Hole Pattern and Select TV Screws

Step 2

Select Spacers (if needed)

Only one screw size ﬁts your TV.

M6 M8

WITH SPACER

For Rounded TV

For Flat TV with:

Inset Holes Cable Interference

Long Screw

Short Screw

Washer

Spacer

TV Bracket

EXTRA

NO SPACER

For Flat TV

Spacer not necessary

SPACE

200 mm ≈ 7 7/8 in.

400 mm ≈ 15 3/4 in.

100 mm ≈ 4 in.

300 mm ≈ 11 3/4 in.

600 mm ≈ 23 6/10 in.

MAX:600mm/23.6 in.

MAX:400mm/16 in.

Secure the left half of wall plate [01] to the right half of wall plate [02] with

the pre-assembled screw [S].

Assemble the Wall Plate

Tighten

Loosen

DO NOT overtighten.

Tighten only until snug.

Too Short Too Long

Step 3 Secure the TV Brackets to Your TV

Alternate Spacer

Setups

With Spacer

No Spacer

Step 4

5A-1

5A-2

Use a stud ﬁnder (not included) to

locate wood studs. Mark the edge and

center locations.

Position the wall plate [01] and [02] at

your desired height and line up the holes

with your stud center line. Level the wall

plate and mark the holes.

24 in.(609mm)

16 in.(406mm)

● Any material covering the wall must not exceed 5/8 in. (16 mm)

● Nominal wood stud size: common 2 x 4 in. (51 x 102 mm) minimum 1½ x 3½ in.

(38 x 89 mm)

● Stud center must be veriﬁed

●Ensure the wall plate [01] and [02] is securely fastened to the wall before

continuing on to the next step.

●DONOT USE ANCHOR [A3] FOR THIS STEP!

WARNING:

Step 5

For wood stud installation, follow STEP 5A

For concrete installation, follow STEP 5B

Secure the Wall Plate [01] and [02] to Wall

Step 5A

Wood Stud Option

●Avoid potential personal injury or property damage! DO NOT over-tighten the lag bolts

[A1]. Tighten the lag bolts [A1] only until the washers [A2] are pulled ﬁrmly against the

wall plate [01] and [02].

WARNING:

●Ensure the wall plate [01] and [02] is securely fastened to the wall

before continuing on to the next step.

● Any material covering the wall must not exceed 5/8 in. (16 mm)

● Mount the wall plate directly onto the concrete surface

● Minimum solid concrete thickness: 203 mm (8 in.)

● Minimum concrete block size: 203 x 203 x 406 mm (8 x 8 x 16 in.)

Wall

Anchor

Step

Solid Concrete or Concrete Block Option

●Avoid potential personal injury or property damage! DO NOT over-tighten the lag bolts

[A1]. Tighten the lag bolts [A1] only until the washers [A2] are pulled ﬁrmly against the

wall plate.

ø5.5mm

65mm

5A-3

5A-4

10mm

Socket Wrench

Drill 4 pilot holes using a 5.5 mm

diameter drill bit. Make sure the

depth is not less than 60mm.

Install the wall plate using lag bolts

[A1] and washer [A2]. Tighten the

lag bolts [A1] only until the washers

[A2] are pulled ﬁrmly against the

wall plate [01] and [02] .

ø10mm

70mm

Drill 4 pilot holes using a 10mm diameter

drill bit. Make sure the depth is not less

than 70mm. Never drill into the mortar

between blocks.

5B-1

5B-2

5B-3

Position the wall plate at your desired

height, level the wall plate and mark the

pilot hole locations.

Use the hammer to knock

anchors [A3] into the wall.

Be sure the anchors [A3]

are seated ﬂush with the

concrete surface.

Install the wall plate using lag bolts [A1], washers [A2]

and anchors [A3]. Tighten the lag bolts [A1] only until

the washers [A2] are pulled ﬁrmly against the wall plate.

DO NOT over-tighten the lag bolts [A1].

Step 6

Secure the TV onto the Wall Plate

To Hang TV onto Wall Plate

1. Hang the TV brackets [03] and [04] onto the wall plate [01] and [02].

2. While pulling the rope down, press the bottom of the TV into the wall plate [01] and [02]

until the latches lock the TV brackets [03] and [04], then release the rope.

Pull the rope down to release the latches so as to remove TV from walll plate.

To Remove TV from Wall Plate

HEAVY! You may need

assistance with this step.

Locking

Press

Thank you for choosing our product! We strive to provide the best quality

and services for our customers. Would you kindly share your experience

on Amazon if you are satisﬁed? Should you have any issues, please don't

hesitate to contact us.

Telephone：

1-800-556-6806 Mon-Fri 10am - 6pm (PST) (USA) (CAN)

Email：

[email protected] (US/CA/DE/UK/FR/IT/ES/AU)

PERLESMITH PSLLK1 Installation guide

PERLESMITH PSLLK1 Installation guide

PERLESMITH PSLLK1 Installation guide

Related papers

Other documents