2. Toro
  3. 6in Hose Kit, E-Z Vac Twin Bagger, 2016 and After Grandstand Mower

Toro 6in Hose Kit, E-Z Vac Twin Bagger, 2016 and After Grandstand Mower Installation guide

  • Hello! I am an AI chatbot trained to assist you with the Toro 6in Hose Kit, E-Z Vac Twin Bagger, 2016 and After Grandstand Mower Installation guide. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
FormNo.3432-806RevB
6inHoseKit
E-ZVac
™
TwinBagger,2016andAfterGrandstand
®
Mower
ModelNo.139-7930
InstallationInstructions
Installation
LooseParts
Usethechartbelowtoverifythatallpartshavebeenshipped.
ProcedureDescription
Qty.
Use
1
Nopartsrequired
–
Preparethemachine.
2
Nopartsrequired
–
Removetheexistinghoseandadapter.
Hoodadapter1
Bolt(5/16x1inch)
4
Nut(5/16inch)
4
3
Template1
Installthehoodadapter.
Blowertransition1
Nut(5/16inch)
4
Plate2
Hose1
Hold-downstrap2
4
Hoseclamp1
Installtheblowertransitionandhose.
1
PreparingtheMachine
NoPartsRequired
Procedure
1.Parkthemachineonalevelsurface.
2.DisengagethePTO,movethemotion-control
leverstotheNEUTRAL-LOCKposition,and
engagetheparkingbrake.
3.Shutofftheengine,removethekey,andwait
forallmovingpartstostopbeforeleavingthe
operatingposition.
©2019—TheToro®Company
8111LyndaleAvenueSouth
Bloomington,MN55420
Registeratwww.Toro.com.
OriginalInstructions(EN)
PrintedintheUSA
AllRightsReserved
*3432-806*B
2
RemovingtheExisting
HoseandAdapter
NoPartsRequired
Procedure
1.Loosenthehoseclampandblowerclampsand
removethehosefromtheblowerassembly
(Figure1).
g185954
Figure1
1.Hose3.Hoseclamp
2.Blowerclamp
2.Removethehosefromthehood(Figure2).
g287358
Figure2
1.Hose
3.Removethe4knobs,2blowerclamps,and
blowertransitionfromtheblowerassembly
(Figure3).
g287360
Figure3
1.Knob(4)
3.Blowertransition
2.Blowerclamp(2)
2
4.Onthehood,removetheexisting4bolts,4nuts,
andhoodadapter(Figure4).
g287428
Figure4
1.Hoodadapter
3.Nut(4)
2.Bolt(4)
5.Discardtheparts.
3
InstallingtheHoodAdapter
Partsneededforthisprocedure:
1Hoodadapter
4
Bolt(5/16x1inch)
4
Nut(5/16inch)
1Template
Procedure
1.Removethebolt,washer,andnutfromthepivot
bracket(Figure5).
g289389
Figure5
1.Nut3.Bolt
2.Washer
2.Placethetemplateonthehood,aligningthe
rightholewiththemountholeforthepivot
bracketandthebottomedgewiththeledgeof
thehood(Figure6).
3
g287443
Figure6
1.Alignbottomedgewith
ledge
2.Alignholewithmounthole.
3.Marktheother4holesandthelargerhole.
4.Drillahole(11/32inch)inthe4locationsyou
marked.
5.Cutthelargerholeusingareciprocatingsaw.
6.Installthenewhoodadapterusing4boltsand
4nutsinthenewmountingholes(seeFigure
4).Torquetheboltsto10.2to12.4N∙m(90to
110in-lb)
Important:Donotovertightenthebolts.
7.InstallthepivotbrackethardwarefromFigure5.
4
InstallingtheBlower
TransitionandHose
Partsneededforthisprocedure:
1Blowertransition
4
Nut(5/16inch)
2Plate
1Hose
2Hold-downstrap
1Hoseclamp
Procedure
1.Installthenewblowertransitionusing2plates
and4nuts(Figure7).
g287427
Figure7
1.Nut(4)
3.Blowertransition
2.Plate(2)
2.Installarubberlatchtoeachplate(Figure8).
g287429
Figure8
1.Rubberlatch
4
3.Thread1endofthetubeintothehooduntilitis
secure(Figure9).
g037657
Figure9
1.Hose
4.Threadthehoseclampontotheotherendofthe
newhose2to3turns(Figure10).
g257568
Figure10
1.Hose3.Rubberlatch
2.Hoseclamp
5.Installthehoseovertheblowertransitionso
thatthehoseformsanapproximately90-degree
bendfromthehood.Adjusttheorientationof
thehose-clamphooksasneededsothatthey
alignwiththerubberlatches,andsecurethe
hosebystretchingtherubberlatchesoverthe
hooks(Figure10).
Note:Ensuretherubberlatchesaretight.
Threadtheclampfurtheronthehoseifthe
latchesareloose.
5
Notes:
Notes:
/