Toro Twin Bagger, Grandstand Mower User manual

Brand: Toro

Model: Twin Bagger, Grandstand Mower

Category: Air blowers/dryers

Type: User manual

Toro Twin Bagger, Grandstand Mower: This attachment for your Toro Grandstand mower helps you collect grass clippings and leaves while you mow, reducing the time and effort spent on yard cleanup. It features a large capacity with two bags that can hold up to 5.3 bushels of material, and a fill indicator that lets you know when the bags are full. The Twin Bagger is easy to install and remove, and it comes with a weight to help keep the mower balanced.

FormNo.3423-836RevA

Note:

TwinBagger

Grandstand

Mower

ModelNo.78524—SerialNo.400000000andUp

Registeratwww.Toro.com.

OriginalInstructions(EN)

*3423-836*A

WARNING

CALIFORNIA

Proposition65Warning

Useofthisproductmaycauseexposure

tochemicalsknowntotheStateof

Californiatocausecancer,birthdefects,

orotherreproductiveharm.

Introduction

Readthisinformationcarefullytolearnhowtooperate

andmaintainyourproductproperlyandtoavoid

injuryandproductdamage.Youareresponsiblefor

operatingtheproductproperlyandsafely.

Visitwww.Toro.comforproductsafetyandoperation

trainingmaterials,accessoryinformation,helpnding

adealer,ortoregisteryourproduct.

Wheneveryouneedservice,genuineT oroparts,or

additionalinformation,contactanAuthorizedService

DealerorT oroCustomerServiceandhavethemodel

andserialnumbersofyourproductready.Figure1

identiesthelocationofthemodelandserialnumbers

ontheproduct.Writethenumbersinthespace

provided.

Important:Withyourmobiledevice,youcan

scantheQRcodeontheserialnumberdecal(if

equipped)toaccesswarranty,parts,andother

productinformation.

g256117

Figure1

1.Blowermodelandserialnumberlocation

ModelNo.

SerialNo.

g256118

Figure2

1.Baggermodelandserialnumberlocation

ModelNo.

SerialNo.

Thismanualidentiespotentialhazardsandhas

safetymessagesidentiedbythesafety-alertsymbol

(Figure3),whichsignalsahazardthatmaycause

seriousinjuryordeathifyoudonotfollowthe

recommendedprecautions.

g000502

Figure3

1.Safety-alertsymbol

Thismanualuses2wordstohighlightinformation.

Importantcallsattentiontospecialmechanical

informationandNoteemphasizesgeneralinformation

worthyofspecialattention.

8111LyndaleAvenueSouth

Bloomington,MN55420

Contactusatwww.Toro.com.

PrintedintheUSA

AllRightsReserved

Contents

Safety.......................................................................3

SafetyandInstructionalDecals..........................4

Setup........................................................................6

1PreparingtheMachine.....................................7

2InstallingtheE-ZVacBlowerandDrive

Kit....................................................................7

3InstallingtheBlowerAssembly,Belt,and

BeltCover.......................................................7

4InstallingtheBaggerEnhancementKit

(Optional)........................................................8

5InstallingtheBrackets......................................8

6InstallingtheBaggerFrame............................11

7InstallingtheBags.........................................12

8InstallingtheBaggerTube.............................12

9InstallingtheWeight.......................................14

Operation................................................................14

OperationSafety..............................................14

PositioningtheFlowBafe................................15

UsingtheBagger..............................................15

UsingtheFillIndicator......................................15

OperatingTips..................................................16

EmptyingtheGrassBags.................................17

ClearingObstructionsfromtheBagger

System..........................................................17

RemovingtheBagger.......................................18

TransportingtheMachine.................................18

Maintenance...........................................................19

RecommendedMaintenanceSchedule(s)...........19

CleaningtheBaggerandBags.........................19

InspectingtheBaggerBelt................................19

ReplacingtheBaggerBelt................................19

InspectingtheBagger.......................................20

InspectingtheMowerBlades............................20

InstallingtheMowerBlades..............................20

Storage...................................................................21

Troubleshooting......................................................22

Safety

WARNING

Toavoidpersonalinjury,followthese

procedures:

•Becomefamiliarwithalloperatingand

safetyinstructionsintheOperator's

Manualforthemowerbeforeusingthis

attachment.

•Neverremovethedischargetube,bags,

baggerhood,orthechutewhiletheengine

isrunning.

•Alwaysshutofftheengine,removethe

key,andwaitforallmovingpartstostop

beforeclearinganobstructionfromthe

baggingsystem.

•Neverdomaintenanceorrepairswhilethe

engineisrunning.

WARNING

Whenthebaggerisinoperation,theblower

isrotatingandcancutofforinjurehandsand

ngers.

•Beforeadjusting,cleaning,repairing

andinspectingtheblower,andbefore

uncloggingthechute,shutofftheengine,

removethekey,andwaitforallmoving

partstostop.

•Useastickorsimilarobject,notyour

hands,toremoveanobstructionfromthe

blowerandtube.

•Keepyourface,hands,feet,andanyother

partofyourbodyorclothingawayfrom

concealed,moving,orrotatingparts.

WARNING

Debris,suchasleaves,grass,orbrushcan

catchre.Areintheengineareacancause

personalinjuryandpropertydamage.

•Keeptheengineandmuferareafreeof

debrisaccumulation.

•Takecarewhenopeningthebaggercover

tokeepdebrisfromfallingontotheengine

andmuferarea.

•Allowthemachinetocoolbeforestoringit.

Thefollowinglistcontainssafetyinformationspecic

toToroproductsandothersafetyinformationyou

mustknow.

•Becomefamiliarwiththesafeoperationofthe

equipment,withtheoperatorcontrols,andsafety

signs.

•Useextracarewithgrasscatchersorother

attachments.Thesecanchangetheoperating

characteristicsandthestabilityofthemachine.

•Followtherecommendationsforaddingor

removingweightsasdescribedintheOperator’s

Manualforthemachine.

•Donotuseagrasscatcheronsteepslopes.A

heavygrasscatchercouldcauselossofcontrol

oroverturnthemachine.

•Slowdownanduseextracareonhillsides.Mow

slopessidetoside.Turfconditionscanaffectthe

stabilityofthemachine.Useextremecaution

whileoperatingneardrop-offs.

•Keepallmovementonslopesslowandgradual.

Donotmakesuddenchangesinspeed,directions,

orturning.

•Thegrasscatchercanobstructtheviewtothe

right.Useextracarewhenoperatingthemachine

inreverse.

•Usecarewhenloadingorunloadingthemachine

intoatrailerortruck.

•Neveroperatewiththedischargedeectorraised,

removed,oraltered,unlessyouareusingagrass

catcher.

•Keepyourhandsandfeetawayfrommovingparts.

Donotmakeadjustmentswiththeenginerunning.

•Stopthemachineonlevelground,disengage

thedrives,engagetheparkingbrake,shutoff

theengine,andremovethekeybeforeleaving

theoperator'spositionforanyreasonincluding

emptyingthegrasscatcheroruncloggingthe

chute.

•Donotoperatethemachinewithouteitherthe

entiregrasscatcher,thegrassdeector,and/or

guardinplace.

•Shutofftheengineandremovethekeybefore

removingthegrasscatcheroruncloggingthe

chute.

•Donotleavegrassinthegrasscatcherfor

extendedperiodsoftime.

•Grasscatchercomponentsaresubjecttowear,

damage,anddeterioration,whichcouldexpose

youtomovingpartsorthrownobjects.Frequently

checkcomponentsandreplacethemwith

themanufacturer'srecommendedpartswhen

necessary.

SafetyandInstructionalDecals

Safetydecalsandinstructionsareeasilyvisibletotheoperatorandarelocatednearanyarea

ofpotentialdanger.Replaceanydecalthatisdamagedormissing.

decal133-8061

133-8061

136-4053

decal136-4053

136-4053

1.Warning;lossoftraction—donotoperateonlywith

counterbalanceweightsinstalled;donotoperateonlywith

theE-ZVacinstalled;operateonlywithboththeE-ZVac

andcounterbalanceweightsinstalled.

decal136-4087

136-4087

1.Warning—readtheOperator’sManual.4.Cutting/dismembermenthazard,impeller—keepawayfrom

movingparts;keepallguardsandcoversinplace.

2.Warning—wearhearingprotection.

5.Cutting/dismembermenthazard,impeller—disengagethe

PTO,removetheignitionkey,andwaitforallmovingparts

tostop.

3.Thrownobjecthazard—donotruntheblowerwithoutthe

entirecollectionsysteminstalledandlatched.

6.Warning;lossoftraction—donotoperateonlywith

counterbalanceweightsinstalled;donotoperateonlywith

E-ZVacinstalled;operateonlywithboththeE-ZVacand

counterbalanceweightsinstalled.

Setup

LooseParts

Usethechartbelowtoverifythatallpartshavebeenshipped.

ProcedureDescription

Qty.

Use

Nopartsrequired

–

Preparethemachine.

E-ZVacBlowerandDriveKit(sold

separately)

InstalltheE-ZVacBlowerandDriveKit

(soldseparately).

Blowerassembly(fromtheBlowerand

DriveKit)

Belt(fromtheBlowerandDriveKit)

Beltcover(fromtheBlowerandDrive

Kit)

Knob(fromtheBlowerandDriveKit)

Installtheblowerassembly,belt,and

beltcover.

BaggerEnhancementKit1

InstalltheBaggerEnhancementKit

(optional).

Frontmountbracket1

Lowermountbracket1

Rearmountbracket1

Rightmountbracket1

Flatwasher2

Bolt(3/8x4inches)

Carriagebolt(3/8x1inch)

Nut(3/8inch)

Carriagebolt(1/4x5/8inch)

Nut(1/4inch)

Installthebrackets.

Bagger-frameassembly

Clevispin

Hairpincotter3

Thrustwasher1

Nut(3/8inch)

Carriagebolt(3/8x1inch)

Installthebaggerframe.

Bag2Installthebags.

Hose(fromtheBlowerandDriveKit)

Hoseclamp(fromtheBlowerandDrive

Kit)

Installthebaggerhose.

Weight1

U-bolt1

LongU-bolt(forMultiForceTM

machineswith52-inchdecksonly)

Locknut(1/2inch)

Installtheweight.

Note:Determinetheleftandrightsidesofthemachinefromthenormaloperatingposition.

PreparingtheMachine

NoPartsRequired

Procedure

Note:RemovetheRollerStriperKit,ifinstalled,prior

toinstallingthisattachment.

1.DisengagethePTO,movethemotion-control

leverstotheNEUTRAL-LOCKposition,and

engagetheparkingbrake.

2.Shutofftheengine,removethekey,andwait

forallmovingpartstostopbeforeleavingthe

operatingposition.

3.Repairallbentordamagedareasofmower

deckandreplaceanymissingparts.

4.Cleanthemachineofanydebrisonthedeckor

rearpartofthemachinetoeaseinstallation.

InstallingtheE-ZVac

BlowerandDriveKit

Partsneededforthisprocedure:

E-ZVacBlowerandDriveKit(soldseparately)

Procedure

RefertotheInstallationInstructionsforthekit.

InstallingtheBlower

Assembly,Belt,andBelt

Cover

Partsneededforthisprocedure:

Blowerassembly(fromtheBlowerandDriveKit)

Belt(fromtheBlowerandDriveKit)

Beltcover(fromtheBlowerandDriveKit)

Knob(fromtheBlowerandDriveKit)

Procedure

1.Lowerthemowerdecktothelowestsetting.

2.Insertthepinfromtheblowerassemblyintothe

blowermountbracketasshowninFigure4.Do

notlatchtheblowerontheblowermount.

g274289

Figure4

1.Blowerassembly3.Insertthepinhere.

2.Pin

3.Installthebelttothepulleysandidlerassembly

asshowninFigure5andFigure6.

decal138-8866

Figure5

g293335

Figure6

1.Blowerbelt2.Mowerdeckbelt

4.Closetheblowerassemblysothatthehandle

latchesontheblowermount.

5.Installthebeltcoverandsecureitbyscrewing

theknobontothescrewontheidler(Figure7).

g037529

Figure7

1.Knob3.Beltcover

2.Idlerscrew

Note:Wheneveryouneedtoopentheblower

assembly,removethebeltcoverrst.

InstallingtheBagger

EnhancementKit(Optional)

Partsneededforthisprocedure:

1BaggerEnhancementKit

Procedure

RefertotheInstallationInstructionsforthekit.

InstallingtheBrackets

Partsneededforthisprocedure:

1Frontmountbracket

1Lowermountbracket

1Rearmountbracket

1Rightmountbracket

2Flatwasher

Bolt(3/8x4inches)

Carriagebolt(3/8x1inch)

Nut(3/8inch)

Carriagebolt(1/4x5/8inch)

Nut(1/4inch)

Procedure

1.Removethefueltank;refertotheOperator’s

Manualforthemachine.

2.Jackuptherear,rightsideofthemachineso

thatnoweightisontherighttire.

3.Removetherighttire(Figure8).

g037604

Figure8

1.Righttire3.Righttransaxle

2.Lugnut

4.Raisetheoperator’splatform.

5.Removethe2rearboltsand2nutsfromthe

righttransaxle(Figure9).Retainthenuts.

g037605

Figure9

1.Bolt3.Righttransaxle

2.Nut

6.Installthelowermountbrackettothe

transmissionusingthe2nutsthatyouremoved,

2atwashers,and2bolts(3/8x4inches)as

showninFigure10.

g185953

Figure10

1.Carriagebolt(3/8x1inch)

andnut(3/8inch)

4.Flatwasher

2.Nut

5.Bolt(3/8x4inches)

3.Lowermountbracket

7.Securethetopofthebracketusing1carriage

bolt(3/8x1inch)and1nut(3/8inch).

8.Torquetheboltsto37to45N∙m(27to33ft-lb).

9.Removethefront2boltsand2nutsfromthe

rightmountbracketandthefront2boltsand2

nutsfromtherighttowerpanel(Figure11).

Important:Ensurethatthefanshroud

insidetheframedoesnotfallontothe

transaxleasyouremovethehardware.

g037607

Figure11

1.Transmissionbolt3.Tower-panelbolt

2.Nut4.Rightmountbracket

10.Usetheboltsandnutsyouremovedinstep9to

securetherightmountbracketandfanshroud

totheframe(Figure11).Torquetheboltsto37

to45N∙m(27to33ft-lb).

11.Looselyinstallthefrontmountbrackettothe

frontofthecontroltowerusing2carriagebolts

(1/4x5/8inch)and2nuts(1/4inch)asshown

inFigure12.

g037608

Figure12

1.Frontofthecontroltower

3.Frontmountbracket

2.Carriagebolt(1/4x5/8

inch)

4.Nut(1/4inch)

12.Lowertheoperator’splatform.

13.Installtherighttire,torquethelugnutsto115to

142N∙m(85to105ft-lb),andlowerthemachine

(Figure8).

InstallingtheBaggerFrame

Partsneededforthisprocedure:

Bagger-frameassembly

Clevispin

3Hairpincotter

1Thrustwasher

Nut(3/8inch)

Carriagebolt(3/8x1inch)

Procedure

1.Withtheassistanceofanotherperson,liftthe

baggerframeandsecurethebottom,rearside

oftheframetothelowermountbracketusinga

clevispinandhairpincotter(Figure13).

g037647

Figure13

1.Baggerframe

3.Lowermountbracket

2.Clevispin

4.Hairpincotter

2.Securetheframetothepinontherearmount

bracketusingathrustwasherandhairpincotter

(Figure14).

g037648

Figure14

1.Rearmountbracket

3.Pin(partofbracket)

2.Hairpincotter4.Thrustwasher

3.Securethebottom,frontsideofthebagger

frametothetransmissionmountbracketusinga

clevispinandhairpincotter(Figure15).

g037649

Figure15

1.Clevispinandhairpin

cotter(installed)

2.Transmissionmount

bracket

4.Securethebaggerframetothefrontmount

bracketusingacarriagebolt(3/8x1inch)and

nut(3/8inch)asshowninFigure16.

g037650

Figure16

1.Nut(3/8inch)

3.Frontmountbracket

2.Carriagebolt(3/8x1inch)

5.Tightenthebaggerframeandfrontmount

bracketnuts.

6.Installthefueltank;refertotheOperator’s

Manualforthemachine.

Note:Whenyouinstallthefueltankbracket,

installtherearmountbracketbetweenthe

controltowerandthefuel-tankbracket.

g037609

Figure17

1.Bolt3.Rearmountbracket

2.Fueltankbracket

7.Raisethecushion.

InstallingtheBags

Partsneededforthisprocedure:

2Bag

Procedure

1.Unlatchandopenthehoodassembly.

2.Installthebagsontobagmounts(Figure18).

g037656

Figure18

1.Bagmount2.Bag

3.Closeandlatchthehoodassembly.

InstallingtheBaggerTube

Partsneededforthisprocedure:

Hose(fromtheBlowerandDriveKit)

Hoseclamp(fromtheBlowerandDriveKit)

Procedure

1.Thread1endofthehoseintothehood2to3

threads(Figure19).

g037657

Figure19

1.Hose

2.Threadthehoseclampontotheotherendofthe

newhose2to3turns(Figure20).

g257568

Figure20

1.Hose3.Rubberlatch

2.Hoseclamp

3.Installthehoseovertheblowertransitionso

thatthehoseformsanapproximately90-degree

bendfromthehood.Adjusttheorientationof

thehose-clamphooksasneededsothatthey

alignwiththerubberlatches,andsecurethe

hosebystretchingtherubberlatchesoverthe

hooks(Figure20).

Note:Ensuretherubberlatchesaretight.

Threadtheclampfurtheronthehoseifthe

latchesareloose.

InstallingtheWeight

Partsneededforthisprocedure:

1Weight

1U-bolt

LongU-bolt(forMultiForce

machineswith52-inch

decksonly)

Locknut(1/2inch)

Procedure

InstalltheweighttotheleftcasterusingaU-boltand

2locknuts(1/2inch)asshowninFigure21.

Note:ForMultiForcemachineswitha52-inchdeck,

usethelongU-bolt.Theweightwillrestontopofthe

frame(Figure22).

g037528

Figure21

1.Locknut—1/2inch(2)3.Caster(wheelnotshown)

2.Weight

4.U-bolt

g220332

Figure22

Operation

OperationSafety

•Becomefamiliarwithalloperatingandsafety

instructionsintheOperator'sManualforyour

machinebeforeusingthisattachment.

•Neverremovethebaggerorbaggertubeswhile

theengineisrunning.

•Alwaysshutofftheengine,removethekey,and

waitforallmovingpartstostopbeforeclearingan

obstructionfromthebaggingsystem.

•Neverdomaintenanceorrepairswhiletheengine

isrunning.

•Engagetheparkingbrake.

WARNING

Withoutthegrassdeector,baggertubes,or

completebaggerassemblymountedinplace,

youandothersareexposedtobladecontact

andthrowndebris.Contactwiththerotating

mowerblade(s),impeller,andthrowndebris

willcauseinjuryordeath.

•Alwaysinstallthegrassdeectorwhen

removingthebaggerandchangingto

side-dischargemode.

•Ifthegrassdeectorisdamaged,replace

itimmediately.Thegrassdeectordirects

materialdowntowardtheturf.

•Neverputyourhandsorfeetunderthe

machine.

•Nevertrytoclearthedischargeareaor

mowerbladesunlessyoumovethepower

takeoff(PTO)tooffandrotatetheignition

keytooff.Also,removethekeyandpull

thewireoffthesparkplug(s).

•Shutofftheenginebeforeuncloggingthe

blowerhousing.

CAUTION

Childrenorbystandersmaybeinjuredifthey

moveorattempttooperatethemachinewhile

itisunattended.

Alwaysremovetheignitionkeyandengage

theparkingbrakewhenleavingthemachine

unattended,evenifjustforafewminutes.

PositioningtheFlowBafe

AdjustthebafetopositionC(frontposition)for

bagging.RefertotheOperatorManualforthe

machine.

Ensurethatthebafedoesnotcontacttheblower

housing.

g012679

Figure23

UsingtheBagger

EngagethePTOonthetractionunittostartthe

blower;disengagethePTOtostoptheblower.

Whenbaggingindryconditions,lowerthemower

decktolimitblowout.

Thebaggingsystemmayplugifyoudrivetoofast

andtheenginespeedistooslow.Onhills,itmaybe

necessarytoslowthegroundspeedofthemachine.

Mowdownhillwheneverpossible.

CAUTION

Asthebaggerlls,extraweightisaddedto

thebackofthemachine.Ifyoustopandstart

themachinesuddenlyonhills,youmaylose

steeringcontrolorthemachinemaytip.

•Donotstartorstopsuddenlywhengoing

uphillordownhill.Avoiduphillstarts.

•Ifyoudostopthemachinewhengoing

uphill,disengagethePTO.Thenbackdown

thehillusingaslowspeed.

•Donotchangespeedsorstoponslopes.

UsingtheFillIndicator

Thellindicatorontopofthebaggerhoodspinsas

youllthebags(Figure24).Thebagsarefullwhen

theindicatorstopsspinning.

Cleanthellindicatorimpellerifthereisgrassor

debrisbuildup.

g037666

Figure24

1.Fillindicator

OperatingTips

MachineSize

Rememberthatthemachineislongerandwiderwith

thisattachmentinstalled.Byturningtoosharplyin

connedplaces,youmaydamagetheattachmentor

otherproperty.

Trimming

Alwaystrimwiththeleftsideofthemower.Donottrim

withtherightsideofthemowerbecauseyoucould

damagethebaggerchuteanddischargetube.

CuttingHeight

Foroptimumbaggingperformance,setthedeck

height-of-cuttoremovenomorethat51to76mm(2

to3inches)or1/3ofthegrassheight,whicheveris

less.Cuttingoffmorethanthisreducesthecapacity

ofthevacuumsystem.

CuttingFrequency

Cutthegrassoften,especiallywhenitgrowsrapidly.

Youwillhavetocutyourgrasstwiceifitgets

excessivelylong;refertoBaggingLongGrass(page

16).

CuttingTechnique

Forbestlawnappearance,besuretoslightlyoverlap

themowerintothepreviouslycutarea.Thishelps

reducetheloadontheengineandreducesthechance

ofpluggingtheblowerassemblyandtube.

BaggingLongGrass

Ifthegrassislongerthannormalorifitcontains

ahighdegreeofmoisture,raisethecuttingheight

higherthanusualandcutandbagthegrassatthis

setting.Thencutandbagthegrassagainusingthe

lower,normalsetting.

Excessivelylonggrassisheavyandmaynotbe

propelledcompletelyintothebagger.Ifthishappens,

thetubeandblowermayplug.T oavoidplugging

thebaggingsystem,mowthegrassatahighheight

ofcut,thenlowerthemowertoyournormalcutting

heightandrepeatthebaggingprocess.

BaggingLeaves

Forcleanestafter-cutappearance,keeptheheight

ofcutasclosetothegrassheightaspossiblewhen

baggingleaves.Itmaybenecessarytolowerthe

heightofcutbelowthegrassheightindry,dusty

conditionstoavoidblowout.Mulchingleavespriorto

baggingcanhelpimprovebaggingperformance.

BaggingWetGrass

Ifpossible,alwaystrytocutgrasswhenitisdry.Wet

grasscancauseplugging.

ReducingPlugging

Toavoidpluggingthebaggingsystem,reducethe

groundspeedandmowthegrassatahighheight

ofcut,thenlowerthemowertoyournormalcutting

heightandrepeatthebaggingprocess.

SignsofPlugging

Asyouarebagging,asmallamountofgrassclippings

normallyblowoutthefrontofthemower.Anexcessive

amountofclippingblow-outindicatesthatthebagger

isfullortheblowerortubeisplugged.

BaggingBlades

Inmostmowingconditions,thestandardhighlift

bladesprovidethebestbaggingperformance.

UseaT oroAtomicbladeforbaggingleavesindry

conditions.Indrydustyconditions,themediumlift

orlowliftbladesreducedustanddirtblowoutwhile

providingeffectivebaggingairow.

ContactanAuthorizedServiceDealerfortheproper

bladesfordifferentmowingconditions.

CurbClimbingandLoading

Alwaysliftthedecktothehighestpositionwhenloading

themachineontrailersorascending/descending

acurb.Leavingthemowerinalowerpositioncan

damagethemowerwhileloadingandgoingovera

curb.Ifacurbishigherthan15.2cm(6inches),cross

itatasharpanglewiththedeckfullyraised.Use

cautionwhenloadingthemachineontoatrailer.

EmptyingtheGrassBags

Grassbagsareheavywhenfull.Becarefulwhen

liftingorhandlingagrassbagthatisfull.

1.DisengagethePTO,movethemotion-control

leverstotheNEUTRAL-LOCKposition,and

engagetheparkingbrake.

2.Shutofftheengine,removethekey,andwait

forallmovingpartstostopbeforeleavingthe

operatingposition.

3.Unlatchthebaggerlatch.

4.Openthebaggerhood.

5.Compressthedebrisintothebags.Withboth

hands,liftuponthebagandunhookitfromthe

baggerbracket.

6.Grabthehandleonthebottomofthebagand

tipitovertoemptythebag(Figure25).

g003357

Figure25

1.Bag2.Bottomhandle

7.Repeatfortheotherbag.

8.Installthebagtabintothenotchinthe

bagger-supportframe.Dothisforbothbags.

9.Lowerthebaggerhoodoverthebags.

10.Latchthebaggerhood.

ClearingObstructionsfrom

theBaggerSystem

WARNING

Whenthebaggerisinoperation,theblower

canrotateandcutofforinjureyourhands.

•Beforeadjusting,cleaning,repairing,

andinspectingtheblower,andbefore

uncloggingthechute,shutofftheengine

andwaitforallmovingpartstostop.

Removethekey.

•Useastick,notyourhands,toremovean

obstructionfromtheblowerandtube.

•Keepyourface,hands,feet,andanyother

partofyourbodyorclothingawayfrom

concealed,moving,orrotatingparts.

1.DisengagethePTO,movethemotion-control

leverstotheNEUTRAL-LOCKposition,and

engagetheparkingbrake.

2.Shutofftheengine,removethekey,andwait

forallmovingpartstostopbeforeleavingthe

operatingposition.

3.Emptythebags.

4.Disconnectthetubefromtheblower.

5.Removethetubefromthebagger.

6.Useastickorsimilarobject,notyourhands,to

removeandcleartheobstructionfromthetube.

Note:Inmostcases,thedebriscanbeshaken

outofthetube.

7.Installthetube.

8.Iftheblowerassemblyisplugged,removethe

beltcover,unlatchtheblowerassembly,and

swingitopen.

9.Useastickorsimilarobject,notyourhands,

toremoveandcleartheobstructionfromthe

blowerassembly.

10.Afteryouremovetheobstruction,closethe

blowerassemblysothatthehandlelatches.

RemovingtheBagger

WARNING

Componentsaroundtheenginewillbehotif

themachinehasbeenrunning.Touchinghot

componentscancauseburns.

•Donottouchenginecomponentswhen

hot.

•Allowtheenginetocoolbeforeremoving

thebagger.

CAUTION

Failingtoremovethefrontbaggerweights

andoperatingthemachinewithoutthebagger

attachmentmaycauseanunstablecondition

thatcouldresultinalossofcontrol.

Alwaysremovethefrontweightswhen

removingthebaggerattachment.

1.DisengagethePTO,movethemotion-control

leverstotheNEUTRAL-LOCKposition,and

engagetheparkingbrake.

2.Shutofftheengine,removethekey,andwait

forallmovingpartstostopbeforeleavingthe

operatingposition.

3.Removethebaggerbyrepeatingthesetup

sectionsinthereverseorder,beginningwith

Step8InstallingtheBaggerTube(page12).

4.Removetheblowerassemblybyrepeatingthe

setupsectionsinthereverseorder;refertothe

InstallationInstructionsfortheblower.

Note:Ensurethatyouremovethefrontweight

andinstallthegrassdeectorwhenyouremove

theblowerassembly.

DANGER

Withoutthegrassdeector,dischargecover,

orcompletegrasscatcherassemblymounted

inplace,youandothersareexposedtoblade

contactandthrowndebris.Contactwith

rotatingmowerblade(s)andthrowndebris

willcauseinjuryordeath.

•Alwaysinstallthegrassdeectorwhen

removingthebaggerandchangingto

side-dischargemode.

•Ifthegrassdeectorisdamaged,replace

itimmediately.Thegrassdeectordirects

materialdowntowardtheturf.

•Neverputyourhandsorfeetunderthe

machine.

•Nevertrytoclearthedischargeareaor

mowerbladesunlessyoumovethepower

takeoff(PTO)totheOFFposition,rotatethe

ignitionkeytoOFF,andremovethekey.

TransportingtheMachine

Ensurethatthelatchisfastenedattherearofthe

baggerhoodbeforeyoutrailerthemachine.

DANGER

Transportingthemachinewithgrassordebris

inthebaggercandamagethemachine.

Donotleavegrassordebrisinthebagger

whiletransportingthemachine.

Maintenance

CAUTION

Ifyouleavethekeyintheswitch,someonecouldaccidentlystarttheengineandseriously

injureyouorotherbystanders.

Removethekeyfromtheswitchbeforeyouperformanymaintenance.

RecommendedMaintenanceSchedule(s)

MaintenanceService

Interval

MaintenanceProcedure

Aftertherst8hours

•Inspectthebaggerbelt.

•Inspectthebagger.

Aftereachuse

•Cleanthebagger,bags,andll-indicatorimpeller.

Every25hours

•Inspectthebaggerbelt.

•Inspecttheimpellerassembly.

Every100hours

•Inspectthebagger.

CleaningtheBaggerand

Bags

ServiceInterval:Aftereachuse

Note:Ifyoudonotcleanthebagger,driedgrasscan

accumulateandclogtheblowerhousingandtube.

1.Washtheinsideandoutsideofthebagger

hood,bags,tube,ll-indicatorimpeller,and

theundersideofthemachine.Useamild

automotivedetergenttoremovedirt.

2.Makesurethatyouremovemattedgrassfrom

allparts.

3.Afterwashingallparts,letthemdrythoroughly.

Note:Withallpartsinstalled,startandrunthe

machineforaminutetoassistindrying.

InspectingtheBaggerBelt

ServiceInterval:Aftertherst8hours

Every25hours

Checkbeltsforcracks,frayededges,burnmarks,or

anyotherdamage.Replacedamagedbelts.

ReplacingtheBaggerBelt

1.DisengagethePTO,movethemotion-control

leverstotheNEUTRAL-LOCKposition,and

engagetheparkingbrake.

2.Shutofftheengine,removethekey,andwait

forallmovingpartstostopbeforeleavingthe

operatingposition.

3.Lowerthemowerdecktothelowestsetting.

4.Loosentheknobonthebeltcoverandremove

thecover.

5.Opentheblowerassemblytoaccessthebelt

andpulley.

6.Pullbackonthespring-loadedidlerpulleyto

relievethebelttension(Figure26).

g256119

Figure26

1.Belt

2.Spring-loadedidlerpulley

7.Removetheexistingbaggerbeltfromthedeck

andblowerassemblybyrotatingtheblower

pulleyasyoupullthebeltoff.

8.Installthebeltaroundtheblowerandidler

pulleysasshowninFigure27.Placethebelt

intotheV-grooveoftheblowerpulley.Holdthe

belttautandrotatethepulleyslowlybyhand.

decal138-8866

Figure27

9.Closetheblowerassemblysothatthehandle

latches.

10.Installthebeltcover.

InspectingtheBagger

ServiceInterval:Every100hours

Aftertherst8hours

1.DisengagethePTO,movethemotion-control

leverstotheNEUTRAL-LOCKposition,and

engagetheparkingbrake.

2.Shutofftheengine,removethekey,andwait

forallmovingpartstostopbeforeleavingthe

operatingposition.

3.Checktheuppertube,lowertube,baggerhood,

andtheblowerassembly.Replacethesepartsif

theyarecrackedorbroken.

4.Checkthebags,baggerframe,andscreen.

Replaceanypartsthatarecrackedorbroken.

5.Tightenallnuts,bolts,andscrews.

InspectingtheMower

Blades

1.Inspectthemowerbladesregularlyand

wheneverabladestrikesaforeignobject.

2.Ifbladesarebadlywornordamaged,installnew

blades.RefertotheOperator'sManualforthe

machineforcompleteblademaintenance.

InstallingtheMowerBlades

Inmostmowingconditions,thestandardhigh-lift

bladesprovidethebestbaggingperformance.

UseaT oroAtomicbladeforbaggingleavesindry

conditions.Indrydustyconditions,themediumlift

orlowliftbladesreducedustanddirtblowoutwhile

providingeffectivebaggingairow.

ContactanAuthorizedServiceDealerfortheproper

bladesfordifferentmowingconditions.

RefertothemachineOperator'sManualformore

informationoninstallingblades.

Page is loading ...

Toro Twin Bagger, Grandstand Mower User manual

Brand: Toro

Model: Twin Bagger, Grandstand Mower

Category: Air blowers/dryers

Type: User manual

Download PDF

report

Toro Twin Bagger, Grandstand Mower User manual

Toro Twin Bagger, Grandstand Mower User manual

Related papers

Other documents