2. Computers & electronics
  3. TVs & monitors
  4. Wall & ceiling mounts accessories
  5. Ranger design
  6. 62-UDR16

Ranger design 62-UDR16 Installation guide

  • Hello! I've reviewed the installation guide for the Ranger Design Shelf Divider 62-UDR16. This document provides step-by-step instructions on assembling and installing the shelf dividers and clips, including how to attach and remove them. I'm ready to answer any questions you might have about the installation process.
  • What should be done after unpacking the components?
    How to attach divider clips?
    How to remove shelf dividers and clips?
INSTALLATION GUIDE
62-UDR16 Shelving Dividers and Clips
QUICK START GUIDE
REQUIRED ITEMS
1
PERSON
q 1.1 Setup............................................................................................................................................... 3 - 4
Phase 1 - Assembly
Phase 2 - Installation
4 - 6
7
q Tape Measure
q Marker
q 2.1 Shelf Divider & Clips Installation......................................................................................................
q 2.2 How To Remove Shelf Divider & Clips.............................................................................................
For technical support, contact us at 1-800-565-5321 62-UDR16 Installation Guide | REV. A1 | Page 3
PHASE 1 – ASSEMBLY
1.1 SETUP
1.1.1 Unpack components; compare with the bill of materials.
1.1.2 Verify all parts are present.
Item No. Description Qty.
60 - 000 Divider Clip 10
EN-420 × 15.5 - 00 Divider 5
BILL OF MATERIALS
60 - 000
EN-420 × 15.5 - 00
For technical support, contact us at 1-800-565-5321 62-UDR16 Installation Guide | REV. A1 | Page 4
ARROW
Push the top of the clip
1.2.1 Attach the divider clips to the extrusions.
PHASE 2 – INSTALLATION
2.1 SHELF DIVIDER & CLIPS INSTALLATION
For technical support, contact us at 1-800-565-5321 62-UDR16 Installation Guide | REV. A1 | Page 5
Use the divider as a guide for the
other cilp.
Repeat the step 1.2.1 to attach
the other clip.
1.2.2 Use the divivder as a guide, then attach the other clip by following the same step on Page 4.
For technical support, contact us at 1-800-565-5321 62-UDR16 Installation Guide | REV. A1 | Page 6
1.2.3 After attaching the clips, slide the both ends of the divider to the clips.
DIVIDER
For technical support, contact us at 1-800-565-5321 62-UDR16 Installation Guide | REV. A1 | Page 7
2.2.1 Remove the divider then use the divider to unclip the clips.
PHASE 2 – INSTALLATION
2.2 HOW TO REMOVE SHELF DIVIDER & CLIPS
Pull the divider up
Push the divider down to
unclip the clip
Divider
For technical support, contact us at 1-800-565-5321 62-UDR16 Installation Guide | REV. A1 | Page 8
“You have successfully installed your
62-UDR16
Thank you for doing business with us.”
You can watch our installation video on the Ranger Design website.
For any feedback or suggestions you may have, please contact: cs@rangerdesign.com
/