Ranger design 62-UDR14 Installation guide

Brand
Ranger design
Model
62-UDR14
Category
Wall & ceiling mounts accessories
Type
Installation guide
INSTALLATION GUIDE
62-UDR14 Shelving Dividers and Clips
QUICK START GUIDE
REQUIRED ITEMS
1
PERSON
q 1.1 Setup............................................................................................................................................... 3 - 4
Phase 1 - Assembly
Phase 2 - Installation
4 - 6
7
q Tape Measure
q Marker
q 2.1 Shelf Divider & Clips Installation......................................................................................................
q 2.2 How To Remove Shelf Divider & Clips.............................................................................................
For technical support, contact us at 1-800-565-5321 62-UDR14 Installation Guide | REV. A1 | Page 3
PHASE 1 – ASSEMBLY
1.1 SETUP
1.1.1 Unpack components; compare with the bill of materials.
1.1.2 Verify all parts are present.
Item No. Description Qty.
60 - 000 Divider Clip 10
EN-420 × 13.5 - 00 Divider 5
BILL OF MATERIALS
60 - 000
EN-420 × 13.5 - 00
For technical support, contact us at 1-800-565-5321 62-UDR14 Installation Guide | REV. A1 | Page 4
ARROW
Push the top of the clip
1.2.1 Attach the divider clips to the extrusions.
PHASE 2 – INSTALLATION
2.1 SHELF DIVIDER & CLIPS INSTALLATION
For technical support, contact us at 1-800-565-5321 62-UDR14 Installation Guide | REV. A1 | Page 5
Use the divider as a guide for the
other cilp.
Repeat the step 1.2.1 to attach
the other clip.
1.2.2 Use the divivder as a guide, then attach the other clip by following the same step on Page 4.
For technical support, contact us at 1-800-565-5321 62-UDR14 Installation Guide | REV. A1 | Page 6
1.2.3 After attaching the clips, slide the both ends of the divider to the clips.
DIVIDER
For technical support, contact us at 1-800-565-5321 62-UDR14 Installation Guide | REV. A1 | Page 7
2.2.1 Remove the divider then use the divider to unclip the clips.
PHASE 2 – INSTALLATION
2.2 HOW TO REMOVE SHELF DIVIDER & CLIPS
Pull the divider up
Push the divider down to
unclip the clip
Divider
For technical support, contact us at 1-800-565-5321 62-UDR14 Installation Guide | REV. A1 | Page 8
“You have successfully installed your
62-UDR14
Thank you for doing business with us.”
You can watch our installation video on the Ranger Design website.
For any feedback or suggestions you may have, please contact: cs@rangerdesign.com
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8

Ranger design 62-UDR14 Installation guide

Brand
Ranger design
Model
62-UDR14
Category
Wall & ceiling mounts accessories
Type
Installation guide
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents