amadeus CORNETTO MK2 BÆRBAR DAB+, SVART Owner's manual

Table

Table of

of

of Contents

Contents

Package contents

··································································

3

Safety

··················································································

3

Overview

··············································································

5

Getting Started

·····································································

6

Operations

···········································································

7

Menu and Settings

··························································

7

DAB+ Radio

·····································································

9

FM Radio

······································································

10

Aux In

··········································································

10

Bluetooth

·····································································

11

Troubleshooting

··································································

12

Specifications

·····································································

13

Disposal

·············································································

15

4

Risks

Risks associated

associated

associated with

with

with high

high

high volumes

volumes

•

•Listening the device with headphones, always reduce the

volume before put on the headphones. After the

headphones are positioned properly, increase the volume

to the desired level.

•To prevent possible hearing damage, do not listen at high volume for long

periods.

Maintenance

Maintenance /

/

/ cleaning

cleaning

•Always power off the radio when cleaning it.

•Never use any harsh or strong solvents to clean the radio since these

may damage the surface of the device. Dry, soft cloth is appropriate,

however, if the radio is extremely dirty, it may be wiped off with a slightly

moist cloth. Make sure the device is dried off after cleaning.

•When you are necessary to ship the radio , store it in its original package.

Save the package for this purpose.

6

Getting

Getting Started

Started

General

General Device

Device

Device Functions

Functions

Connect the DC cable of the power adaptor to the DC IN socket at the back

of the device and plug the power adaptor to the mains socket. Switch ON

the device.

If it is the first time to enter DAB mode, the device will automatically scan

the DAB/DAB+ stations.

Press the button on the device to select modes - DAB , FM ,

Bluetooth or AUX IN .

Press and hold the MENU

MENU

MENU /

/

/ INFO

INFO

INFO button to open the menu.

O n the playing screen, r otate the rotary button to adjust the volume.

On the menu, rotate the rotary button or press the /

button to move along the entries.

Press the rotary button to confirm; press the ALARM

ALARM

ALARM /

/

/ BACK

BACK

BACK button to step

back.

Press and hold the button on the device to switch to standby

mode. The time, date and any active alarm times display on the screen.

Press and hold the same button to switch on the device.

There are 10 presets for DAB and 10presets for FM .

Built

Built in

in

in Rechargeable

Rechargeable

Rechargeable Battery

Battery

The device can be powered by built in rechargeable battery. Install the

battery in the battery compartment.

The LED near the ON/OFF switch is to indicate the charging status of the

built in battery. When the battery is fully charged, the LED lights green. If

battery is under charging, the LED lights red.

The icon on the top right corner of the display shows the level of the battery

power and low battery status.

Note : If the device is not operated with AC-DC adapter and the battery

power is fully empty without recharging, the current time and date of the

8

Alarms

There are two alarms available. Choose one of them to continue.

You may press and hold the ALARM

ALARM

ALARM /

/

/ BACK

BACK

BACK button to enter alarm menu

directly in any mode.

Alarm

Alarm Mode

Mode

Mode - set the schedule of the alarm: Off, Daily, Once, Weekends or

Weekdays.

Alarm

Alarm Time

Time

Time - set the alarm time .

Alarm

Alarm Sound

Sound

Sound - set the alarm sound: Buzzer, DAB or FM.

Alarm

Alarm Volume

Volume

Volume - set the alarm volume.

Press the rotary button to confirm the alarm setting and press the

ALARM/BACK

ALARM/BACK button return to the alarm menu.

When the alarm(s) is/are set and saved , a clock icon will appear at the

bottom of the display. The clock icon is also displayed on the screen at

standby mode.

Note : In order to activate the alarm if the alarm sound is set to DAB/FM,

the antenna should be extended and positioned properly to ensure good

reception of station signals.

When alarm started, press the button to turn off the alarm, or

press the rotary button to enter snooze mode.

You may change the time to 5, 10, 15 or 30 minutes by rotating the rotary

button. The alarm will activate in the selected time.

If you want to stop snooze in advance, press the button to turn it

off.

Sleep

Select sleep time of 15, 30, 45, 60 minutes, 1hours 15 minutes, 1hours

30 minutes, 1hours 45 minutes, or two hours. The device will turn off in

the selected time. Sleep icon will display on the top of screen.

The default setting is Off, this means the device will not turn off when you

are listening to it.

Factory

Factory Reset

Reset

Choose Yes to do factory reset and the system will restart. Choose No to

cancel.

All customised settings and stored preset stations will be erased after

factory reset.

10

If there is a picture shown for the station, you can press the rotary button

to enlarge the picture with full screen. Press the rotary button again, the

display will go back to the playing screen.

FM

FM Radio

Radio

Press the rotary button to search the station. The icon on the top right

corner of the display shows the strength of the FM signal detected by the

device.

Enter the menu, you can see the options of the FM radio as below:

Preset

Preset Recall

Recall

Recall - check the preset list and choose the saved station to

listening. Or press the PRESET

PRESET

PRESET /

/

/ BT

BT

BT PAIR

PAIR

PAIR button to enter the list directly, or

press the 1-3

1-3

1-3 buttons to recall preset 1 to 3.

Preset

Preset Store

Store

Store - when listening to a station, you may save it for easy access

the station next time. Or press and hold the PRESET

PRESET

PRESET /

/

/ BT

BT

BT PAIR

PAIR

PAIR button to

enter the list directly, or press and hold the 1-3

1-3

1-3 buttons to save preset 1

to 3.

Scan

Scan Setting

Setting

Setting - set to receive the strong signal stations only. If the radio

scans to receive many poor signal stations, set to Yes to get the strong

signal stations only.

Audio

Audio Setting

Setting

Setting - set to receive the stereo or mono FM signal.

RDS

RDS (Radio

(Radio

(Radio Data

Data

Data System)

System)

System) Receiption

Receiption

You can view the information of FM stations which broadcast added data

compatible with RDS. Press the MENU

MENU

MENU /

/

/ INFO

INFO

INFO button to view the

programme information, the programme type, frequency or the date if

available.

AUX

AUX IN

IN

In AUX IN mode, you can play audio file from an external source such as

MP3 player. To play audio file with AUX IN mode, follow the steps below:

Turn the volume low on both the device and the audio source device if

adjustable.

Connect the external audio source to the 3.5mm AUX IN socket at the

back of the device using the audio cable

12

Troubleshooting

Error

Error Remedy

Remedy

The device does not switch

on.

1. Check it the power adaptor is connected

properly.

2. (If using battery powering the device)

Ensure that the battery has been charged. If

battery power is low, charge the device by

connecting the power adaptor.

No sound. 1. Turn on the sound as it may be muted

2. Increase the volume.

3. Pull any connected headphone or speaker

from the connector jack.

Hiss in FM mode Check/move the antenna or move the device.

No stations available /

burbling / intermittent in

DAB mode

1. Check/move the antenna or move the

device.

2. Rescan local stations only (high-strength).

3. Check the local DAB coverage.

Alarm does not work. 1. Switch on the alarm.

2. Due to the volume setting, refer to the

solutions of “ No sound ” .

3. The source of alarm was set to be station

but there is no network connection. Change

the source of alarm or reconfigure the

connection.

All other undetermined

cases.

The smart radio may process large amount of

data after a period of operation, no matter in

which mode, it will cause the system freeze

13

or malfunction.

Reboot the device if necessary.

The normal function of the product may be

disturbed by strong Electro-Magnetic

Interference. If so, simply reset the product

to resume normal operation by following the

instruction manual. In case the function

could not resume, please use the product in

other location.

The device may malfunction when used in

areas with strong radiointerference. The

device will work properly again once there is

no more interference.

Specications

Model

Model number

number

number ACORNETTO2B / ACORNETTO2W /

ACORNETTO2WN

Description DAB/DAB+/FM Radio with Bluetooth

Display 2.4", 320 x 240, TFT colour display

Bluetooth version BT 5.0, Supports A2DP, AVRCP proles

Frequency band Bluetooth: 2.4GHz - 2.48 GHz

Max. radio frequency power

transmitted

Bluetooth: <4dBm

DAB / DAB+ Band III (174.928 – 239.200 MHz)

FM 87.5 – 108.0 MHz, support RDS

Power SupplyPower Adaptor, 5V 2400mA

14

Rechargeable battery 3.7V 4000mAh

Standby mode power

consumption

<1.0W

Operating temperature 0

o

C - 35

o

C

Speaker power output 4W RMS

Connections 3.5mm headphone socket

3.5mm aux in socket, stereo

DC IN power supply socket (3.5mm)

Dimensions 250 mm(L) x 150 mm(H) x 80 mm(D)

Weight 1.275 k g s

Specifications subject to change without notice.

Power

Power Adaptor

Adaptor

Manufacturer Dongguan Yingna Electronic Technology Co.

Ltd.

Address: 4/F NO.4 ZHENRONG ROAD, NO.6 INDUSTRIAL

ZONE, CAIWU WUSHA DISTRICT, CHANGAN TOWN,

DONGGUAN, GUANGDONG 523857 CHINA

Type YN-24WA050240EU

Input voltage AC 100 – 240V

Input AC frequency 50/60 Hz

Output voltage DC 5.0V

Output current 2.4A

Output power 12.0W

Average active efficiency 81.22% @ 115VAC/60Hz

80. 70 % @ 230VAC/50Hz

Efficiency at low

load(10%)

84.27% @115VAC/60Hz

80.48% @230V/50Hz

15

No-load power

consumption

0.026W @115VAC/60Hz

0.065W @ 230VAC/50Hz

Use only original AC adaptor; Use only the power supplylisted in the user

instructions

Disposal

This symbol on the product or in the instructions means that your electrical

and electronic equipment should be disposed at the end of its life separately

from your household waste.

There are separate collection systems for recycling in the EU.

For more information, please contact the local authority or your retailer where

you purchased the product.

Notes

Notes for

for

for battery

battery

battery disposal

disposal

The batteries used with this product contain chemicals that are harmful to the

environment.

To preserve our environment, dispose of used batteries according to your local

laws or regulations.

Do not dispose of batteries with normal household waste.

For more information, please contact the local authority or your retailer where

you purchased the product.

16

Imported

Imported and

and

and Exclusively

Exclusively

Exclusively marketed

marketed

marketed by:

by:

Power International AS,

PO Box 523, 1471 L ø renskog, Norway

Power Norge:

https://www.power.no/kundeservice/

T: 21 00 40 00

Expert Danmark:

https://www.expert.dk/kundeservice/

T: 70 70 17 07

Power Danmark:

https://www.power.dk/kundeservice/

T: 70 33 80 80

Punkt 1 Danmark:

https://www.punkt1.dk/kundeservice/

T: 70 70 17 07

Expert Finland:

https://www.expert.fi/tuki/asiakaspalvelu/

T: 020 7100 670

Power Finland:

https://www.power.fi/tuki/asiakaspalvelu/

T: 0305 0305

Power Sverige:

https://www.power.se/kundservice/

T: 08 517 66 000

Indholdsfortegnelse

Pakkens indhold

·································································

19

Sikkerhed

···········································································

19

Oversigt

·············································································

21

S å dan kommer du i gang

······················································

22

Betjening

···········································································

23

Menu og indstillinger

·····················································

23

DAB+-radio

···································································

25

FM-radio

·······································································

26

AUX-indgang

·································································

27

Bluetooth

·····································································

27

Fejls ø gning

·········································································

28

Specifikationer

···································································

30

Bortskaffelse

······································································

31

20

•

•S ø rg for, at den elektriske sp æ nding, der fremg å r af radioen og dens

str ø mstik, svarer til stikkontaktens sp æ nding. Ukorrekt sp æ nding

ø del æ gger enheden.

Risici,

Risici, der

der

der er

er

er tilknyttet

tilknyttet

tilknyttet h

h

h ø

ø

ø je

je

je lydstyrke

lydstyrke

•

•N å r du lytter til enheden med hovedtelefon, skal du altid

reducere lydstyrken, f ø r du tager hovedtelefonen p å . N å r

du har taget hovedtelefonen p å korrekt, skal du for ø ge lydstyrken til det

ø nskede niveauet.

•

•Med henblik p å at forebygge h ø reskader b ø r du ikke lytte ved h ø jt

lydniveau i l æ ngere tid ad gangen.

Vedligeholdelse

Vedligeholdelse /

/

/ Reng

Reng

Reng ø

ø

ø ring

ring

•Sluk altid for radioen, n å r du g ø r den rent.

•Brug aldrig skrappe eller st æ rke opl ø sningsmidler til at reng ø re radioen,

eftersom disse kan beskadige enhedens overflade. En t ø

r,

bl ø d klud er

passende. Hvis radioen er ekstremt snavset, kan den dog aft ø rres med en

letfugtet klud. S ø rg for, at enheden er t ø rret efter reng ø ring.

•Hvis det er n ø dvendigt at sende radioen, skal den placeres i sin

oprindelige emballage. Gem pakken af hensyn til dette form å l.

Page is loading ...

amadeus CORNETTO MK2 BÆRBAR DAB+, SVART Owner's manual

This manual is also suitable for

amadeus CORNETTO MK2 BÆRBAR DAB+, SVART Owner's manual

in other languages

Related papers

Other documents