Cash Acme 23576-0150 Operating instructions

Brand: Cash Acme

Model: 23576-0150

Type: Operating instructions

Cash Acme 23576-0150 is a Water Heater Temperature & Pressure Relief Valve, an essential safety device for any water heater. It protects the water heater from excessive pressure and temperature by automatically releasing excess pressure or temperature. The valve is made of durable materials like cast bronze and stainless steel, ensuring longevity and reliability. Its compact design makes it easy to install, and the clear instructions in the manual guide you through the process.

Cash Acme NCLX Combination Temperature

and Pressure Relief Valves are designed for the

protection of hot water heaters and storage tanks.

Cash Acme NCLX Valves are designed

to meet all applicable standards and are ideal for

all domestic water heater applications.

• Completely automatic relief and reseating after

temperature or pressure relief: Ideal for domestic

water heater applications.

• Incorporates an inert thermal element coating:

Provides effective isolation from mineral deposits

(liming) and galvanic corrosion.

• Listed by CSA and ASME: Inspector friendly,

peace of mind!

• Every valve is tested for performance prior to

shipping: Specify and install with confidence!

NCLX T & P Relief Valve

TYPICAL INSTALLATION

All recognized codes require that a temperature

actuated relief valve be installed on a storage

water heater in such a manner that the

temperature sensing element is in contact with

hot water in the top six inches of the tank. A

drain line must be fitted to each T&P valve. The

drain line should discharge into a floor drain

or terminate in a location that will not cause

personal injury or property damage in the event

the valve discharges.

Cash Acme • 2400 7th Avenue SW • Cullman, AL 35055-0278 • 1-877-700-4242 • FAX: 1-877-700-4280 • www.cashacme.com

A Division of the Reliance Worldwide Corporation

CERTIFICATIONS

Cash Acme NCLX Relief Valves are certified to ANSI Z21.22 and CSA 4.4 and are capacity certified to ASME Boiler code

Sect IV. (1/2" sizes are CSA listed only).

MODELS/SIZES

NCLX Relief Valve

CONNECTIONS

Threaded (NPT) . . . . . . . . . . . . . Male inlet and female outlet, size per table above.

Cast

bronze

body

Brass &

stainless steel

internal parts

Inert

thermal

element

coating

Reference Number: BA001S

Issue Date January 2008

Spring loading

temperature element

insures consistent

operation

NCLX-5L Illustrated

Type Size

DIMENSIONS

AB C D E

NCLX - 1

1/2" 1-1/8" 1-5/8" 3-3/16" 1-3/16" 1-7/16"

NCLX - 1

3/4" 1-1/4" 1-5/8" 3-3/16" 1-3/16" 1-5/16"

NCLX - 5

1/2" 1-1/8" 1-5/8" 4-7/8" 1-3/16" 3-1/8"

NCLX - 5

3/4" 1-1/4" 1-5/8" 4-7/8" 1-3/16" 3-3/32"

NCLX - 5S

3/4" 1-1/4" 1-5/8" 4-7/8" 1-1/2" 2-3/4"

NCLX - 5L

3/4" 1-1/4" 1-5/8" 4-7/8" 2-3/32" 2-1/8"

NCLX - 5LX

3/4" 1-1/4" 1-5/8" 4-7/8" 2-5/16" 1-7/8"

NCLX - LS

3/4" 1-1/4" 1-5/8" 4-7/8" 2-5/8" 1-9/16"

NCLX - A

3/4" 1-1/4" 1-5/8" 4-7/8" 3-5/16" 7/8"

NCLX - 8

3/4" 1-1/4" 1-5/8" 9-3/4" 1-3/16" 7-7/8"

Cash Acme 23576-0150 Operating instructions

Brand: Cash Acme

Model: 23576-0150

Type: Operating instructions

Download PDF

report

Cash Acme 23576-0150 Operating instructions

Cash Acme 23576-0150 Operating instructions

Related papers

Other documents