Cash Acme 20166-0030Z User manual

Type
User manual

The Cash Acme 20166-0030Z is a top-of-the-line temperature and pressure relief valve designed to protect your water heater from excessive temperature and pressure. If the temperature or pressure in your water heater exceeds safe levels, the 20166-0030Z will automatically open to release the excess heat or pressure, preventing your water heater from rupturing. This is especially important in areas with high water pressure or where the water heater is located in a confined space.

The Cash Acme 20166-0030Z is a top-of-the-line temperature and pressure relief valve designed to protect your water heater from excessive temperature and pressure. If the temperature or pressure in your water heater exceeds safe levels, the 20166-0030Z will automatically open to release the excess heat or pressure, preventing your water heater from rupturing. This is especially important in areas with high water pressure or where the water heater is located in a confined space.

Specifications: BC001 • Issue Date May 2014
2400 7th Avenue S.W · Cullman · Alabama 35055 · USA · www.cashacme.com
US Contact: 1-877-700-4242 · sales@cashacme.com · Canadian Contact: 1-888-820-0120 · canadasales@rwc.com
A Division of Reliance Worldwide Corporation
F-30 Safety Relief Valve
DESCRIPTION
The Cash Acme F-30 is a compact and economical ASME Safety Relief Valve for use on hot
water space heating boilers, water supply heaters, and storage tanks.
The Cash Acme F-30 Relief Valve is designed for use on hot water service only and is not to
be used on steam.
The Cash Acme F-30 is available in 3/4" size only. The F-30 has a female outlet and the option
of either male or female inlet pipe threads.
The standard factory pressure relief setting is 30 psi.
Our F-30 pressure only safety relief valve features an all brass body, brass and stainless steel
internal parts, silicone seat disc, and stainless steel pressure spring.
The male inlet version is also available in optional material as Lead Free*.
FEATURES AND BENEFITS
Compact and economical:
Saves space and money!
Listed by the National Board (ASME Boiler Code Section IV):
Inspector friendly, peace of mind!
Every valve is tested for performance prior to shipping:
Specify and install with confidence.
SPECIFICATION
A pressure only relief valve shall be installed to protect the vessel. The valve shall have a relief
capacity of 510,000 BTU/HR. The valve shall have a set pressure of 30 psi and shall be ASME
certified. The valve shall be a Cash Acme F-30 ASME Safety Relief Valve.
* A device is defined as Lead Free if its normally wetted surface has a weighted average lead
content not exceeding 0.25%.
Specifications: BC001 • Issue Date May 2014
2400 7th Avenue S.W · Cullman · Alabama 35055 · USA · www.cashacme.com
US Contact: 1-877-700-4242 · sales@cashacme.com · Canadian Contact: 1-888-820-0120 · canadasales@rwc.com
A Division of Reliance Worldwide Corporation
F-30 Safety Relief Valve
TYPICAL INSTALLATION
SPECIFICATION DATA
Performance:
Set pressure ………………………………….. 30 psi
Service ………………………………………… Water
Materials:
Body ………………………………………… Brass
Internal Parts …………………………………. Brass and stainless steel
Seat Disc …………………………………… Silicone
Pressure Spring ……………………………… Stainless steel
CONNECTIONS
Threaded …………………………………… 3/4" male or female inlet and female outlet
CERTIFICATIONS
The Cash Acme F-30 Relief Valve is capacity certified to ASME Boiler Code Section IV.
  • Page 1 1
  • Page 2 2

Cash Acme 20166-0030Z User manual

Type
User manual

The Cash Acme 20166-0030Z is a top-of-the-line temperature and pressure relief valve designed to protect your water heater from excessive temperature and pressure. If the temperature or pressure in your water heater exceeds safe levels, the 20166-0030Z will automatically open to release the excess heat or pressure, preventing your water heater from rupturing. This is especially important in areas with high water pressure or where the water heater is located in a confined space.

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI