Commax IDentry-T20-D Owner's manual

USER MANUAL

T20 Series

www.commax.com

Thank you for purchasing COMMAX products.

Please carefully read this User’s Guide (in particular, precautions for safety) before using a product and

follow instructions to use a product exactly.

The company is not responsible for any safety accidents caused by abnormal operation of the product.

CONTENTS

COMMAX Access Control Solutions

1.Before Starting

Cautions

Product Specification

Components

Parts and Functions

Dimensions

Fingerprint Registration

Verification Mode

Displays

Ethernet Connection with Hub

Ethernet Connection with PC

2.Instruction of Card Type

Instruction of Card Type

3.Instruction of Fingerprint Type

Instruction of Fingerprint Type

4.User

User-Registration

User-Delete

User-Temporary ID

5.Setting

Setting - Basic

Setting - Advanced

Setting - Access

Setting - Communication

Setting - Event

6.USB Memory

USB Memory

7.Information

Memory Information

Device Information

8.Installation Guide

Part Name

Cable Connection - Power

Cable Connection - TCP/IP

Cable Connection - Wiegand Out

Cable Connection - RF Card Reader

Cable Connection - Sensor

Cable Connection - Relay

RS485 / RS422(T-20)

28

4

3

5

6

10

11

12

13

14

15~18

19

20~22

23

24~25

26

27

29

30~32

33~35

36~37

38

39

40

41

42

43

44

45

46

47

48

49

50

51

52

7

8

9

Before Starting

www.commax.com

COMMAX Access Control Solutions

Product Specification

Confirm the specifications.

External Connector : 1.25mm pitch

T20 Series

T20-F T20-D T20-C

COMMAX Access Control Solutions

Cautions

Avoid direct sunlight or heat radiations

Do not use liquid solvent or wet cloth

when cleaning. Use soft cloth.

Do not put around strong magnetic

things such as TV, monitor and magnet

Call service centre if you have

any problems.

Be careful not to drip liquid such as

water or beverage into the item.

Do not renovate, repair or separate as

you want randomly. A/S will not be taken.

COMMAX Access Control Solutions

Components

Bracket

Cable Screw / Programme CD

TCP/IP Extension Cable

T20

COMMAX Access Control Solutions

Parts and Functions

Color TFT LCD

Display time,

device

status, user list

and UI

LED

Light on system status

LED

Light on system status

Fingerprint Sensor

Register and

identify

user’s fingerprint

Speaker

Output sound effect

& voice message

Connector

Connect to cable

USB

Slot to connect

USB memory

COMMAX Access Control Solutions

Dimensions

48(mm)

38(mm) 34.4(mm)

9.2(mm)

138(mm)

124.4(mm)

COMMAX Access Control Solutions

Fingerprint Registration

Proper way

Improper way

Note - Register fingerprint

Register fingerprint properly.

Recommend to register other finger part

when a finger is wounded.

Recommend to register more than

two fingers to ready for various situations.

COMMAX Access Control Solutions

Verification Mode

Verify set points on the menu - Settings / Advanced / Operated Mode

Card

Fingerprint

CARD

COMMAX Access Control Solutions

Displays

There is a display component of basic menu.

COMMAX Access Control Solutions

Ethernet Connection with Hub

Ethernet Hub

COMMAX Access Control Solutions

Ethernet Connection with PC

T20 that is supported to automatic MDI / MDIX can connect to PC through straight type

but not cross type.

Instruction of Card Type

www.commax.com

COMMAX Access Control Solutions

Instruction of Card Type

1.File Excusion

1) Run Shortcut Tool. exe of T20

2) Connect TCP-IP to T20 terminal port and PC

COMMAX Access Control Solutions

Instruction of Card Type

2. Programme Explanation

1)Search device

2)It can set communication parameter of installed product

3)It can register and delete master card

3. Device Search of Programme Explanation(A)

1) It can check equipment state

(no. unique ID , ID , IP Address , Subnet Mask, Default, Port, Language)

when click search device.

COMMAX Access Control Solutions

Instruction of Card Type

4. Change IP Address and Port(B)

5.Register and Delete Master Card(C)

1) It can modify selected Denice, ID ,Ip Address, Subnet mask,

Default Gateway, Port Number and Language

COMMAX Access Control Solutions

Instruction of Card Type

a) Read All: Bring all information of registered master card at the device

b) Delete All: Delete all information of registered master card at the device

c) Delete: Delete only only one card at the device

d) Register: Register only one card at the device

e) Get from device:

f) Card type: Select register or delete card

1) Register / Delete Master Card

- It can flash LED of data click device when clicks GET FROM DEVICE(See E)

- It automatically can be put card No. by voice message "verify card" next to GET FROM DEVICE.

- It can register one(See D) to select register or delete card at the card type(See F)

Instruction of

Fingerprint Type

www.commax.com

COMMAX Access Control Solutions

Instruction of Fingerprint Type

[ Fingerprint Type ]

Fingerprint prism implements menu button

Press fingerprint sensor for 3 seconds and access to system

menu If admin user registered, only confirmed admin user has

right to access to the system

Note :

Dafult has no admin user and open to access system menu

for anyone Multiple admin user can be reigistered

ESC

OK

Page is loading ...

Commax IDentry-T20-D Owner's manual

This manual is also suitable for

Commax IDentry-T20-D Owner's manual

Related papers

Other documents