ESAB LHF 400 is a thyristor controlled welding rectifier designed for welding with coated electrodes and TIG welding. It features a maximum load of 400 A at 36 V, an open circuit voltage of 65-72 V, and a duty cycle of 35% at maximum load. The device has an enclosure class of IP 23, making it suitable for indoor and outdoor use, and an application class that indicates its suitability for areas with increased electrical hazard.
ESAB LHF 400 is a thyristor controlled welding rectifier designed for welding with coated electrodes and TIG welding. It features a maximum load of 400 A at 36 V, an open circuit voltage of 65-72 V, and a duty cycle of 35% at maximum load. The device has an enclosure class of IP 23, making it suitable for indoor and outdoor use, and an application class that indicates its suitability for areas with increased electrical hazard.
ESAB LHF 400 is a thyristor controlled welding rectifier designed for welding with coated electrodes and TIG welding. It features a maximum load of 400 A at 36 V, an open circuit voltage of 65-72 V, and a duty cycle of 35% at maximum load. The device has an enclosure class of IP 23, making it suitable for indoor and outdoor use, and an application class that indicates its suitability for areas with increased electrical hazard.
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI