MK K427WHI is a telephone socket suitable for mounting in flush or surface boxes with a minimum depth of 16mm. It is independently tested and BABT approved or tested to BS6312 Part 2 under the OFTEL general approvals. As a Master Outlet, it is used for the first socket outlet on a direct exchange line as the primary Network Termination Point and is surge protected according to OFTEL requirements as defined in BS6312. The MK K427WHI comes complete with a cable tie fixing point, IDC terminals for easy wiring, and a decorative modular frontplate for a clean and professional finish.
MK K427WHI is a telephone socket suitable for mounting in flush or surface boxes with a minimum depth of 16mm. It is independently tested and BABT approved or tested to BS6312 Part 2 under the OFTEL general approvals. As a Master Outlet, it is used for the first socket outlet on a direct exchange line as the primary Network Termination Point and is surge protected according to OFTEL requirements as defined in BS6312. The MK K427WHI comes complete with a cable tie fixing point, IDC terminals for easy wiring, and a decorative modular frontplate for a clean and professional finish.
MK K427WHI is a telephone socket suitable for mounting in flush or surface boxes with a minimum depth of 16mm. It is independently tested and BABT approved or tested to BS6312 Part 2 under the OFTEL general approvals. As a Master Outlet, it is used for the first socket outlet on a direct exchange line as the primary Network Termination Point and is surge protected according to OFTEL requirements as defined in BS6312. The MK K427WHI comes complete with a cable tie fixing point, IDC terminals for easy wiring, and a decorative modular frontplate for a clean and professional finish.
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI