KitSound Glow User manual

Brand: KitSound

Model: Glow

Type: User manual

kitsound.co.uk

JB. 3501 / Made in China. © KitSound

™

2015. Christchurch, Dorset, BH23 4FL, UK

GLOW

COLOUR CHANGING

BLUETOOTH SPEAKER

USER MANUAL

We are craftspeople. We are musicians. We are KitSound

™

And we all commit ourselves to achieving one shared goal: Bringing

people closer to their music. By truly understanding music we stay true

to its craft. Pure, rich, incredible sound. We’ll settle for nothing less.

At KS we believe your music deserves to be showcased on great

quality products that don’t cost the earth. We might not all share

the same taste in music (the ferocious disputes on music forums

prove that), but whether it’s Irish folk, death metal or any number

of obscure genres which seem to be multiplying by the minute, the

artists responsible for connecting with you through their craft have

bared their souls to do so. And we think that’s worth celebrating.

Like the musicians we’re honouring, we’re obsessed with our craft;

ﬁne-tuning and tweaking our products to make sure we constantly

deliver full-bodied, symphonic sound. So from a single note played

on a piano, to the full impact of a bass guitar, you can rest assured

that you’ll always be doing justice to your music.

8 9

Please read this manual carefully before use.

Box contents

• KS Glow

• Remote

• Power adaptor

• User manual

Functions

On the Glow:

A. Power/Light/Pairing

B. DC input

C. LED indicator

On the remote:

1. Brightness up

2. Brightness down

3. Lights ON/OFF

4. Red

5. Green

6. Blue

7. Purple

8. Yellow

9. Cyan

10. Candle (orange)

11. White

12. Cycle colour

13. Previous track

14. Next track

15. Play/Pause

16. Volume down

17. Volume up

18. Power

19. Pairing

20. Flash

21. Strobe

22. Fade

23. Smooth

24. Music lights

16 17 18 19

1 2 3

10 11

Instructions for use

Getting started

1. Plug the power adaptor into a convenient AC wall outlet and switch it on

2. Insert the connector into the DC input (B)

3. The LED indicator (C) will be red to indicate it is charging

4. When the LED indicator (C) goes out, this means the battery is fully charged

5. Press the power button (18) on the remote to turn the Glow on or press and hold the power (A)

button on the Glow for 2 seconds

6. Press the power button (18) again to turn the Glow off or press and hold the power (A) button

for 2 seconds

Note: Charging time will take up to 10 hours to complete. When fully charged, you can then use

the Glow without the mains power adaptor.

Bluetooth setup

Pairing a Bluetooth device for the ﬁrst time

With the Glow turned off:

1. Press the power button (18) on the remote followed by the Pairing button (19) or press and hold the

power (A) button on the Glow for 4 seconds

2. The LED indicator (C) will ﬂash blue quickly

3. Using the controls on your Bluetooth device, select the ‘KS GLOW’ in your Bluetooth settings to pair

Note: If your device requests a password, enter ‘0000’

Note: Refer to your device’s user manual for instructions on pairing and connecting Bluetooth devices

4. When connected, the Glow’s LED indicator (C) will turn solid blue

Re-pairing or pairing new devices

1. Make sure the Bluetooth is turned off on any previously paired devices

2. Follow step 1 onwards from initial pairing instructions

Using Bluetooth

Playing audio wirelessly

1. Follow the instructions in the ‘Pairing a Bluetooth device’ section

2. Use the controls on your device to select a track

3. To play or pause the selected track, use the controls on your device or press the Play/Pause button (15)

4. To skip a track, use the controls on your device or press the Previous Track button (13) or Next Track

button (14)

5. Audio played through the connected Bluetooth device will now be heard through the speakers

6. The volume can be adjusted on both your device and the Glow. To change the volume on the Glow,

press the Volume– (16) and Volume+ (17) buttons

Note: Track control functions from the buttons on the Glow and remote will require your device to have

Bluetooth proﬁle AVRCP. Please check your device’s manual if unsure.

12 13

Controlling the lights

The Glow has many different settings for the lighting effects. They can be used whilst the speaker is

turned on or off. Press (don’t hold) the Power button (A) to turn the lights on or off. You can also press

the light ON/OFF button (3) on the remote. Once the light is on, you can:

Press the:

1. Red button (4)

2. Green button (5)

3. Blue button (6)

4. Purple button (7)

5. Yellow button (8)

6. Cyan button (9)

7. Candle (orange) button (10)

8. White button (11)

9. Cycle colour button (12)

Change the brightness of the light

The brightness setting will only affect solid colours. Press and hold the:

1. Brightness up button (1) to increase the brightness

2. Brightness down button (2) to decrease the brightness

Change the effects

Press the:

1. Flash button (20) and the lights will ﬂash through all the different colours automatically

2. Strobe button (21) for the lights to strobe on and off. You can change the colour then press the Strobe

button (21) to strobe different colours

3. Fade button (22) for the lights to fade in and out red, blue and green (the colours cannot be changed)

4. Smooth button (23) for the lights to smoothly change between red, blue and green

(the colours cannot be changed)

5. Music Lights button (24) for the lights to change to the beat of the music. This will only work if the

volume is set to maximum on both your device and the Glow. When the Glow is not detecting the music

it will automatically switch to Smooth mode. When the music is detected, it will automatically start

ﬂashing the lights in time to the music (providing the Music Lights button (24) was the last button

to be pressed)

14 15

Troubleshooting

We hope you’ve now got all the information you need to get started, but if you’re having problems

with anything, please feel free to contact us at: support

kitsound.co.uk

Care for your Glow

Please DON’T:

• Immerse the Glow in water as it is protected from splashing only*

• Drop the Glow as this will invalidate your warranty

• Open up the Glow as there are no user serviceable parts inside

• Expose the Glow to extreme temperatures or rapid changes of hot to cold or vice versa

Please DO:

• Clean the Glow with a soft dry cloth and no detergents

• Dry the Glow after use if it gets damp or wet

Speciﬁcations

Bluetooth V2.1

Bluetooth range up to 10 m

Output RMS 3 W

IP rating* IPX4 (protects from splashing water, only whilst rubber

cover is closed)

Battery 4400 mAh Li-ion

Charge time up to 10 hours

Play time up to 18 hours

We apologise for any inconvenience caused by minor inconsistencies in these instructions, which may occur as a result of

product improvement and development.

KitSound Glow User manual

KitSound Glow User manual

Related papers

Other documents