Intermec DC-DC Installation guide

Installation Instructions

P/N 962-054-025

Revision A

February 2000

Mobile DC-DC

Uninterruptible Power Supply

P/N 962-054-025 Revision A

*962054025*

Introduction

This block diagram shows the power connections for including an uninterruptible power

supply (UPS) on electricĆpowered vehicle installations. Mounting hardware is the same

as for the DCĆDC converter (see Installation Manual P/N 962Ć054Ć004 for details).

Ferrite bead, molded-on

(location unimportant)

Both Cables

P/N 226-341-001

Inline fuse and cable termination

(see manual P/N 962-054-004)

Uninterruptible

Power Supply

Ferrite bead, molded-on

(orient closest to dc-dc converter))

Ferrite bead, on-site installation

(orient closest to dc-dc converter))

DC-DC Converter

P/N 851-041-001

Cable

P/N 226-340-001

Battery Information

The UPS battery requires 3-4 hours to become fully charged.

Remove the UPS cover to access the battery for replacement.

out

Mobile

Computer