Tern DuoStand Operating instructions

DuoStand
Brand
Tern
Model
DuoStand
Type
Operating instructions

Tern DuoStand is a sturdy bike stand compatible with Tern HSD Gen 1 and HSD Gen 1A bikes, allowing you to park your bike upright and securely. It features a 132 lb load limit, including the bike's weight, providing stability even for heavy bikes. The DuoStand comes with a wing-shaped plate and bushing for HSD Gen 1 models, ensuring proper fit and stability. Its simple installation process involves removing the existing kickstand, identifying the frame variant, and installing the hardware in the specified order. Remember to tighten the bolts to the recommended torque for optimal performance.

Tern DuoStand is a sturdy bike stand compatible with Tern HSD Gen 1 and HSD Gen 1A bikes, allowing you to park your bike upright and securely. It features a 132 lb load limit, including the bike's weight, providing stability even for heavy bikes. The DuoStand comes with a wing-shaped plate and bushing for HSD Gen 1 models, ensuring proper fit and stability. Its simple installation process involves removing the existing kickstand, identifying the frame variant, and installing the hardware in the specified order. Remember to tighten the bolts to the recommended torque for optimal performance.

11
ternbicycles.com
DuoStand™
Safety
Do not exceed the load limit of 60 kg (132 lb). Please remember
the max load limit includes the weight of the bike.
Never leave children on a parked bike unattended.
Compatible Bikes
• HSD Gen 1
• HSD Gen 1A
What’s Included
• DuoStand
• Wing-shaped Plate
• Bolt Set x 2
Installation
Tools required (not included)
• 17 mm Wrench x 2
• 5 mm Allen Wrench
1. Remove the existing kickstand. 2. Identify the HSD frame variant by locating the
kickstand mount in front of the rear wheel.
HSD Gen 1 HSD Gen 1A
Mounting Location
HSD Gen 1 only
HSD Gen 1 frame variants
WARNING: Route cables as shown to avoid damage from compression.
22
ternbicycles.com
DuoStand™
LIMITED PRODUCT WARRANTY INFORMATION: This Product comes with a ONE (1) YEAR Limited Warranty from the date of retail purchase by the
original end-user. If a material or workmanship defect arises and a valid claim is received within the Warranty Period, this Product will be replaced.
Mobility Holdings cannot be held liable for damages to personal property due to misuse or improper care and maintenance. This Product Warranty
does not, under any circumstance, cover the replacement or cost of any third party product used with or connected to the Product.
Tern, the Tern Werd (logotype), the Tern Berd (device), and DuoStand used alone or in combination are trade names, trade devices or registered
trademarks of Mobility Holdings, Ltd.
© 2021. Tern is a trademark of Mobility Holdings, Ltd. All Rights Reserved.
ternbicycles.com
17 mm
17 mm
17 mm
17 mm
4. Tighten Bolts to a torque of 35-40 Nm.
3. Install hardware in the order shown.
HSD Gen 1
HSD Gen 1
HSD Gen 1A
HSD Gen 1A
@ternbicycles
Assembly Order
1. Nut
2. Washer
3. Wing-shaped plate*
4. Bushing*
5. HSD
6. DuoStand
7. Washer
8. Bolt
Assembly Order
1. Nut
2. Washer
3. HSD
4. DuoStand
5. Washer
6. Bolt
* Wing-shaped
plate and Bushing
are needed
for installing
DuoStand on
HSD Gen 1 only.
  • Page 1 1
  • Page 2 2

Tern DuoStand Operating instructions

DuoStand
Brand
Tern
Model
DuoStand
Type
Operating instructions

Tern DuoStand is a sturdy bike stand compatible with Tern HSD Gen 1 and HSD Gen 1A bikes, allowing you to park your bike upright and securely. It features a 132 lb load limit, including the bike's weight, providing stability even for heavy bikes. The DuoStand comes with a wing-shaped plate and bushing for HSD Gen 1 models, ensuring proper fit and stability. Its simple installation process involves removing the existing kickstand, identifying the frame variant, and installing the hardware in the specified order. Remember to tighten the bolts to the recommended torque for optimal performance.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents