5
6
PICTUREPICTURE
Brightness 84Brightness 84
Contrast 80Contrast 80
Color 50Color 50
Sharpness 50Sharpness 50
Tint 00Tint 00
CC1 CC2 CC3 CC4 TT1 TT2 TT3 TT4 Off
CC1 CC2 CC3 CC4 TT1 TT2 TT3 TT4 Off
Preset
Red
PICTURE parameters:
Press M(MENU) key and select PICTURE.
Press CH- and CH+ to select an item (menu will
roll and show those hidden items with the action
of the CH+ and CH-).
When a certain item is selected, it will be
highlighted red, use VOL+ and VOL- to change
the parameter to your preference.
PICTURE parameters:
Press M(MENU) key and select PICTURE.
Press CH- and CH+ to select an item (menu will
roll and show those hidden items with the action
of the CH+ and CH-).
When a certain item is selected, it will be
highlighted red, use VOL+ and VOL- to change
the parameter to your preference.
1.Presss MENU two times, then enter the
OPTION menu.
2.Select item with CH+ and CH-, the selected
item will highlighted red.
3.Select the language you would like to see
on your screen (English/Francais/Espanol)
with VOL+ and VOL-.
4.Press CH+ and CH- to select C.CAPTION,
the selected item highlighted with red.
When OFF displays, C.CAPTION is set off.
When CC1 displays, C.CAPTION is set active.
Press VOL+ repeatedly , the option will display
followed on the screen in turn:
1.Presss MENU two times, then enter the
OPTION menu.
2.Select item with CH+ and CH-, the selected
item will highlighted red.
3.Select the language you would like to see
on your screen (English/Francais/Espanol)
with VOL+ and VOL-.
4.Press CH+ and CH- to select C.CAPTION,
the selected item highlighted with red.
When OFF displays, C.CAPTION is set off.
When CC1 displays, C.CAPTION is set active.
Press VOL+ repeatedly , the option will display
followed on the screen in turn:
OPTIONOPTION
Language English Language English
C.Caption OffC.Caption Off
Setup PICTURESetup PICTURE
Turning The TV OnTurning The TV On
PICTUREPICTURE
Brightness 84Brightness 84
Contrast 80Contrast 80
Color 50Color 50
Sharpness 50Sharpness 50
Tint 00Tint 00
Getting Started With
Personalized Setup
Getting Started With
Personalized Setup
Setting up this TV can be personalized, please refer to
this manual. It contains instructions to help you. The TV
is preset with default setting preset by manufacturer. To
get personalized setting, please read on.
1. Page 5 a brief introduction to the key functions.
2. Page 6 PICTURE.
3. Page 6 SETUP
4. Page 7 TIME
5. Page 7 PRESET
6. Page 7 V-CHIP
Setting up this TV can be personalized, please refer to
this manual. It contains instructions to help you. The TV
is preset with default setting preset by manufacturer. To
get personalized setting, please read on.
1. Page 5 a brief introduction to the key functions.
2. Page 6 PICTURE.
3. Page 6 SETUP
4. Page 7 TIME
5. Page 7 PRESET
6. Page 7 V-CHIP
red.red.
EnglishEnglish EnglishEnglish
7
Setup TIME Setup TIME
1.Press MENU three times, then enter the CLOCK menu.
2.TIME, selected item will highlight to red;
3.Use VOL+ to adjust minute and use VOL- to adjust hour.
4.Press CH+ and CH- to change the selected parameter
as you wish; Similarly, you can set a Time On/Time
Off/Reminder/Choice;
5.You can also set a time on a channel you want, enter the
channel menu, press VOL+ or VOL- to change the
number of the channel.
1.Press MENU three times, then enter the CLOCK menu.
2.TIME, selected item will highlight to red;
3.Use VOL+ to adjust minute and use VOL- to adjust hour.
4.Press CH+ and CH- to change the selected parameter
as you wish; Similarly, you can set a Time On/Time
Off/Reminder/Choice;
5.You can also set a time on a channel you want, enter the
channel menu, press VOL+ or VOL- to change the
number of the channel.
Setup PRESETSetup PRESET
1.Press the MENU four times, then enter the PRESET menu.
2.Channel: press VOL+ to change the channel you want to
preset.
3.Add/Erase: use CH+ and CH- to select the option, press
VOL+ and VOL- to add or erase TV channels to/from the
program.
4.Antenna: the default parameter is Air, which indicates
the signal receiving method is through the antenna of the
TV. Use VOL+ to change it to CABLE if you are using
cable service.
5.AUTO SEARCH: press the VOL+ or VOL-, it will
automatically search for TV channels. (When
available signal is detected, the channel locked in will
release the lock, press VOL+, and the search resumes).
1.Press the MENU four times, then enter the PRESET menu.
2.Channel: press VOL+ to change the channel you want to
preset.
3.Add/Erase: use CH+ and CH- to select the option, press
VOL+ and VOL- to add or erase TV channels to/from the
program.
4.Antenna: the default parameter is Air, which indicates
the signal receiving method is through the antenna of the
TV. Use VOL+ to change it to CABLE if you are using
cable service.
5.AUTO SEARCH: press the VOL+ or VOL-, it will
automatically search for TV channels. (When
available signal is detected, the channel locked in will
release the lock, press VOL+, and the search resumes).
Setup V-CHIP Setup V-CHIP
Pressing Rating on your remote controller will bring Pressing Rating on your remote controller will bring
V-CHIP to set up display on TV. You will see the V-CHIP to set up display on TV. You will see the
following on your TV screen. following on your TV screen.
This function enables you to block certain TV
channels in according to the V-CHIP requirements
established by the FCC.
Follow the procedure below to set the V-CHIP:
Press the Rating button, you will see the V-CHIP
menu on your TV screen:
1. Press CH+ and CH- to go up and go down the menu.
2. Press VOL+ and VOL- to enter password and then
go into TV Rating and Movie Rating menu.
3. Press VOL+/- to set the Block On and Block Off.
When TV Rating is selected, press VOL+, then you
will find you need enter password, after entering the
default password 0000, you will see the following
rating table on your TV screen.
This function enables you to block certain TV
channels in according to the V-CHIP requirements
established by the FCC.
Follow the procedure below to set the V-CHIP:
Press the Rating button, you will see the V-CHIP
menu on your TV screen:
1. Press CH+ and CH- to go up and go down the menu.
2. Press VOL+ and VOL- to enter password and then
go into TV Rating and Movie Rating menu.
3. Press VOL+/- to set the Block On and Block Off.
When TV Rating is selected, press VOL+, then you
will find you need enter password, after entering the
default password 0000, you will see the following
rating table on your TV screen.
Note: When block On is selected, you will see B
instead of U. When block Off is selected,
you will see U instead of B.
When MPAA Rating is selected, press VOL, then you
will find you need enter password, after entering the
default password 0000, you will see the following
rating table on your TV screen.
Note: When block On is selected, you will see B
instead of U. When block Off is selected,
you will see U instead of B.
When MPAA Rating is selected, press VOL, then you
will find you need enter password, after entering the
default password 0000, you will see the following
rating table on your TV screen.
CLOCKCLOCK
Time 0:00Time 0:00
On Time --:--On Time --:--
Off Time --:--Off Time --:--
Reminder --:--Reminder --:--
Choice --:--Choice --:--
On Channel -On Channel -
PRESETPRESET
Channel 69Channel 69
Add/Erase AddAdd/Erase Add
Antenna AirAntenna Air
Auto SearchAuto Search
V-CHIP
Block Off
TV Rating
MPAA Rating
Change Password
V-CHIP
Block Off
TV Rating
MPAA Rating
Change Password
MPAA Rating MPAA Rating
Movie RatingMovie Rating
G UG U
PG PG
UU
PG-13 PG-13
UU
R R
UU
NC-17 NC-17
UU
X X UU
Age Based Rating Age Based Rating
Rating FV D L S VRating FV D L S V
TV RatingTV Rating
TV-Y TV-Y
UU
TV-Y7 TV-Y7 UU
TV-G TV-G
TV-PG TV-PG
UU
UU
UU UU
TV-14 TV-14 UU
UU
UU
UU
TV-MA TV-MA
UU
UU UU
Adult languageAdult language
UU
UU
UU
UU
UU
Note: When block On is selected, you will see B
instead of U. When block Off is selected,
you will see U instead of B.
Note: When block On is selected, you will see B
instead of U. When block Off is selected,
you will see U instead of B.
Setup OPTION Setup OPTION