Easylife Solar Colour Changing Fountain Operating instructions

Easylife
Brand
Easylife
Model
Solar Colour Changing Fountain
Type
Operating instructions
Solar Colour Changing Pond
Water Feature
INSTRUCTION MANUAL
Model No.3009
Please read carefully before use and keep for future reference
IN3009 © 2022 Easylife Ltd
Support Line: 0333 030 0777
www.easylife.co.uk
Easylife Ltd, London, NW1 0JP
Support Line: 0333 030 0777
© Easylife Ltd. 2022 (Reg. No. 05221840)
For more innovative products, please visit
www.easylife.co.uk
Solar Floating Fountain
●.Parts list
Number: 1J1SP13D011
DD
Parts Quantity
Name
Solar panel with pumpA
C
D
E
1
B1
B2
B3
B4
B5
B6
B7
B8
B
Nozzle 1
Nozzle 2
Nozzle 3
Nozzle 4
Nozzle 5
Nozzle 6
Nozzle 7
Connection pipe
Plastic pipe
Fasteners
Filter cotton
1
1
1
1
1
1
1
1
4
4
Optional
4. Install the plastic pipe . put D into C , a total of four group(H).(as
shown in fig.3)
3. You can install the nozzles B1 , B2 , B3 ,B4 or F on solar fountain.
(as shown in fig.2)
BB55BB66BB77
BB88
5. Install H into solar fountain(EVA open slot). (as shown in fig.4)
4
3
1
2. Assembling the connecting pipe B8 and the nozzless B5,B6 or B7
into F(as shown in fig.1)
●.Assembly Method
1. Please choose the Nozzles you like between B1-B7.
6. You can cut the plastic pipe according to your requirement .
7. Putting the product into water, making sure the water pump is
completely immersed in water. Let the sunlight shine directly on
DISPOSAL
• Please respect the environment!
• Dispose of the packaging according to the local recycling regulations.
• Dispose of the appliance at the end of its life span according to environmental considerations.
TECHNICAL SPECIFICATION
LED: 6 LEDs, RGB
Battery: Lithium battery 3.7V 900mA
Solar panel: 7V/2.2W Size of solar panel: 160cm Diameter
Maximum lift of pump: 80cm
Power of pump: 1.0W
Maximum water height: 30-50cm
Max. volume of ow: 120-220L/h
Support Line: 0333 030 0777
www.easylife.co.uk
Solar Floating Fountain
●.Parts list
Number: 1J1SP13D011
D
D
Parts Quantity
Name
Solar panel with pumpA
C
D
E
1
B1
B2
B3
B4
B5
B6
B7
B8
B
Nozzle 1
Nozzle 2
Nozzle 3
Nozzle 4
Nozzle 5
Nozzle 6
Nozzle 7
Connection pipe
Plastic pipe
Fasteners
Filter cotton
1
1
1
1
1
1
1
1
4
4
Optional
4. Install the plastic pipe . put D into C , a total of four group(H).(as
shown in fig.3)
3. You can install the nozzles B1 , B2 , B3 ,B4 or F on solar fountain.
(as shown in fig.2)
BB55BB66BB77
BB88
5. Install H into solar fountain(EVA open slot). (as shown in fig.4)
4
3
1
2. Assembling the connecting pipe B8 and the nozzless B5,B6 or B7
into F(as shown in fig.1)
●.Assembly Method
1. Please choose the Nozzles you like between B1-B7.
6. You can cut the plastic pipe according to your requirement .
7. Putting the product into water, making sure the water pump is
completely immersed in water. Let the sunlight shine directly on
Solar Floating Fountain
●.Parts list
Number: 1J1SP13D011
DD
Parts Quantity
Name
Solar panel with pumpA
C
D
E
1
B1
B2
B3
B4
B5
B6
B7
B8
B
Nozzle 1
Nozzle 2
Nozzle 3
Nozzle 4
Nozzle 5
Nozzle 6
Nozzle 7
Connection pipe
Plastic pipe
Fasteners
Filter cotton
1
1
1
1
1
1
1
1
4
4
Optional
4. Install the plastic pipe . put D into C , a total of four group(H).(as
shown in fig.3)
3.
You can install the nozzles B1 , B2 , B3 ,B4 or F on solar fountain.
(as shown in fig.2)
B
B
5
5
B
B
6
6
B
B
7
7
B
B
8
8
5.
Install H into solar fountain(EVA open slot). (as shown in fig.4)
4
3
1
2. Assembling the connecting pipe B8 and the nozzless B5,B6 or B7
into F(as shown in fig.1)
●.Assembly Method
1. Please choose the Nozzles you like between B1-B7.
6. You can cut the plastic pipe according to your requirement .
7. Putting the product into water, making sure the water pump is
completely immersed in water. Let the sunlight shine directly on
Solar Floating Fountain
●.Parts list
Number: 1J1SP13D011
DD
Parts Quantity
Name
Solar panel with pumpA
C
D
E
1
B1
B2
B3
B4
B5
B6
B7
B8
B
Nozzle 1
Nozzle 2
Nozzle 3
Nozzle 4
Nozzle 5
Nozzle 6
Nozzle 7
Connection pipe
Plastic pipe
Fasteners
Filter cotton
1
1
1
1
1
1
1
1
4
4
Optional
4. Install the plastic pipe . put D into C , a total of four group(H).(as
shown in fig.3)
3. You can install the nozzles B1 , B2 , B3 ,B4 or F on solar fountain.
(as shown in fig.2)
BB55BB66BB77
BB88
5. Install H into solar fountain(EVA open slot). (as shown in fig.4)
4
3
1
2. Assembling the connecting pipe B8 and the nozzless B5,B6 or B7
into F(as shown in fig.1)
●
.Assembly Method
1. Please choose the Nozzles you like between B1-B7.
6. You can cut the plastic pipe according to your requirement .
7. Putting the product into water, making sure the water pump is
completely immersed in water. Let the sunlight shine directly on
Solar Floating Fountain
●.Parts list
Number: 1J1SP13D011
DD
Parts Quantity
Name
Solar panel with pumpA
C
D
E
1
B1
B2
B3
B4
B5
B6
B7
B8
B
Nozzle 1
Nozzle 2
Nozzle 3
Nozzle 4
Nozzle 5
Nozzle 6
Nozzle 7
Connection pipe
Plastic pipe
Fasteners
Filter cotton
1
1
1
1
1
1
1
1
4
4
Optional
4. Install the plastic pipe . put D into C , a total of four group(H).(as
shown in fig.3)
3. You can install the nozzles B1 , B2 , B3 ,B4 or F on solar fountain.
(as shown in fig.2)
BB55BB66BB77
BB88
5. Install H into solar fountain(EVA open slot). (as shown in fig.4)
4
3
1
2. Assembling the connecting pipe B8 and the nozzless B5,B6 or B7
into F(as shown in fig.1)
●.Assembly Method
1. Please choose the Nozzles you like between B1-B7.
6. You can cut the plastic pipe according to your requirement .
7. Putting the product into water, making sure the water pump is
completely immersed in water. Let the sunlight shine directly on
1. Before using the product, the protective film on the solar panel should
be removed to avoid affecting the normal operation of the product.
2. You can choose the nozzles according to your preferences and
environment.
3. Make sure solar panel gain enough sunlight , Don’t cover the solar
panel with sundries or garbage.
4. Make sure you have put enough water in the fountain so that the
pump can stay entirely under the water.
5. The fountain should be put into the water to exhaust the air when the
solar fountain is used for the first time.
6. when there is enough sunlight , the spray height is too low or only a
little water .please take out the filter cotton or rotor for cleaning or
replacement.(as shown in the fig.5)
The first step : remove the nozzle
The second step : remove the water pump
The third step : Take out the filter cotton or rotor
the fourth step : Clean filter cotton or rotor
The fifth step : Reassemble the fountain
●.Specifications
the solar panel without any shade so that the water pump can start
spraying water.
●.Note
●.Product features
B7
5
Nozzle
Water pump
Rotors
Front cover
Filter cotton
Size of solar
panel
(mm)
Power of
Solar panel
(W)
voltage of Solar
panel
(V)
Voltage of
Water pump
(V)
Volume of
Flow
(L/h)
Water
height
(cm)
Battery
capacity
(mAh)
The quan
tity of
LED light
The color of
LED light
375-7 120-220 30-50 900 6 Colorful
gradient
Ф
160
1. Place Fountains in direct sunlight for full day. This will give battery charge.
If there is a cloudy day the Fountains will not operate until the sun shines
on it again.The LED light will work at night if the battery is charged.
2. The height of the spray water will change with the change of sunlight .
3. The Led will be lighted at night and the spray height will remain constant
four hour.
4. The product has a water shortage protection function, when the solar
fountain can’t gain enough water, the pump and LED will stop working
automatically.
5. Lifespan：≥ 10000 h.
6. Here are seven spray patterns.
Attach clips onto fountain like below image.
If you nd the fountain is not staying central in the water it can be stabi-
lized using the plastic pipes. Push the pipe onto the nodule on each clip as
shown below. The pipes are not required to use the fountain.
Put the product into water, making sure the water pump is completely im-
mersed in water. Let the sunlight shine directly on the solar panel without
any shade so that the water pump can start spraying water.
Choose the desired nozzle (B1-B7)
If Nozzles B6, B6 or B7 have been chosen, assemble by connecting to B8
to form “Part F” (as shown in g.1)
Install the chosen nozzle onto the solar fountain by pushing into the center
hole (as shown in g. 2)
Attach clips onto fountain by following the images below
Solar Floating Fountain
●.Parts list
Number: 1J1SP13D011
DD
Parts Quantity
Name
Solar panel with pumpA
C
D
E
1
B1
B2
B3
B4
B5
B6
B7
B8
B
Nozzle 1
Nozzle 2
Nozzle 3
Nozzle 4
Nozzle 5
Nozzle 6
Nozzle 7
Connection pipe
Plastic pipe
Fasteners
Filter cotton
1
1
1
1
1
1
1
1
4
4
Optional
4. Install the plastic pipe . put D into C , a total of four group(H).(as
shown in fig.3)
3. You can install the nozzles B1 , B2 , B3 ,B4 or F on solar fountain.
(as shown in fig.2)
BB55BB66BB77
BB88
5. Install H into solar fountain(EVA open slot). (as shown in fig.4)
4
3
1
2. Assembling the connecting pipe B8 and the nozzless B5,B6 or B7
into F(as shown in fig.1)
●.Assembly Method
1. Please choose the Nozzles you like between B1-B7.
6. You can cut the plastic pipe according to your requirement .
7. Putting the product into water, making sure the water pump is
completely immersed in water. Let the sunlight shine directly on
Solar Floating Fountain
●.Parts list
Number: 1J1SP13D011
DD
Parts Quantity
Name
Solar panel with pumpA
C
D
E
1
B1
B2
B3
B4
B5
B6
B7
B8
B
Nozzle 1
Nozzle 2
Nozzle 3
Nozzle 4
Nozzle 5
Nozzle 6
Nozzle 7
Connection pipe
Plastic pipe
Fasteners
Filter cotton
1
1
1
1
1
1
1
1
4
4
Optional
4. Install the plastic pipe . put D into C , a total of four group(H).(as
shown in fig.3)
3. You can install the nozzles B1 , B2 , B3 ,B4 or F on solar fountain.
(as shown in fig.2)
BB55BB66BB77
BB88
5. Install H into solar fountain(EVA open slot). (as shown in fig.4)
4
3
1
2. Assembling the connecting pipe B8 and the nozzless B5,B6 or B7
into F(as shown in fig.1)
●.Assembly Method
1. Please choose the Nozzles you like between B1-B7.
6. You can cut the plastic pipe according to your requirement .
7. Putting the product into water, making sure the water pump is
completely immersed in water. Let the sunlight shine directly on
1 piece included
Support Line: 0333 030 0777
www.easylife.co.uk
●.Product features
B7
1. Place Fountains in direct sunlight for full day. This will give battery charge.
If there is a cloudy day the Fountains will not operate until the sun shines
on it again.The LED light will work at night if the battery is charged.
2. The height of the spray water will change with the change of sunlight .
3. The Led will be lighted at night and the spray height will remain constant
four hour.
4. The product has a water shortage protection function, when the solar
fountain can’t gain enough water, the pump and LED will stop working
automatically.
5. Lifespan：≥ 10000 h.
6. Here are seven spray patterns.
1. Before using the product, the protective film on the solar panel should
be removed to avoid affecting the normal operation of the product.
2. You can choose the nozzles according to your preferences and
environment.
3. Make sure solar panel gain enough sunlight , Don’t cover the solar
panel with sundries or garbage.
4. Make sure you have put enough water in the fountain so that the
pump can stay entirely under the water.
5. The fountain should be put into the water to exhaust the air when the
solar fountain is used for the first time.
6. when there is enough sunlight , the spray height is too low or only a
little water .please take out the filter cotton or rotor for cleaning or
replacement.(as shown in the fig.5)
The first step : remove the nozzle
The second step : remove the water pump
The third step : Take out the filter cotton or rotor
the fourth step : Clean filter cotton or rotor
●.Note
Maintenance
Clean the pump and panel regularly with a damp cloth to get optimum
performance.
Do not use any type of chemical cleaning detergent to clean the product.
Be careful not to put too much pressure on the solar panels while cleaning.
Make sure nothing covers any part of the solar panel or blocks the pump.
Always ensure there is sufcient water otherwise the pump will become
damaged and stops working.
If you nd the water spray is blocked, you can remove the pump for
cleaning (as shown).
1. Before using the product, the protective film on the solar panel should
be removed to avoid affecting the normal operation of the product.
2. You can choose the nozzles according to your preferences and
environment.
3. Make sure solar panel gain enough sunlight , Don’t cover the solar
panel with sundries or garbage.
4. Make sure you have put enough water in the fountain so that the
pump can stay entirely under the water.
5. The fountain should be put into the water to exhaust the air when the
solar fountain is used for the first time.
6. when there is enough sunlight , the spray height is too low or only a
little water .please take out the filter cotton or rotor for cleaning or
replacement.(as shown in the fig.5)
The first step : remove the nozzle
The second step : remove the water pump
The third step : Take out the filter cotton or rotor
the fourth step : Clean filter cotton or rotor
The fifth step : Reassemble the fountain
●.Specifications
the solar panel without any shade so that the water pump can start
spraying water.
●.Note
●.Product features
B7
5
Nozzle
Water pump
Rotors
Front cover
Filter cotton
Size of solar
panel
(mm)
Power of
Solar panel
(W)
voltage of Solar
panel
(V)
Voltage of
Water pump
(V)
Volume of
Flow
(L/h)
Water
height
(cm)
Battery
capacity
(mAh)
The quan
tity of
LED light
The color of
LED light
375-7 120-220 30-50 900 6 Colorful
gradient
Ф
160
1. Place Fountains in direct sunlight for full day. This will give battery charge.
If there is a cloudy day the Fountains will not operate until the sun shines
on it again.The LED light will work at night if the battery is charged.
2. The height of the spray water will change with the change of sunlight .
3. The Led will be lighted at night and the spray height will remain constant
four hour.
4. The product has a water shortage protection function, when the solar
fountain can’t gain enough water, the pump and LED will stop working
automatically.
5. Lifespan：≥ 10000 h.
6. Here are seven spray patterns.
1. Before using the product, the protective film on the solar panel should
be removed to avoid affecting the normal operation of the product.
2. You can choose the nozzles according to your preferences and
environment.
3. Make sure solar panel gain enough sunlight , Don’t cover the solar
panel with sundries or garbage.
4. Make sure you have put enough water in the fountain so that the
pump can stay entirely under the water.
5. The fountain should be put into the water to exhaust the air when the
solar fountain is used for the first time.
6. when there is enough sunlight , the spray height is too low or only a
little water .please take out the filter cotton or rotor for cleaning or
replacement.(as shown in the fig.5)
The first step : remove the nozzle
The second step : remove the water pump
The third step : Take out the filter cotton or rotor
the fourth step : Clean filter cotton or rotor
The fifth step : Reassemble the fountain
●.Specifications
the solar panel without any shade so that the water pump can start
spraying water.
●.Note
●.Product features
B7
5
Nozzle
Water pump
Rotors
Front cover
Filter cotton
Size of solar
panel
(mm)
Power of
Solar panel
(W)
voltage of Solar
panel
(V)
Voltage of
Water pump
(V)
Volume of
Flow
(L/h)
Water
height
(cm)
Battery
capacity
(mAh)
The quan
tity of
LED light
The color of
LED light
375-7 120-220 30-50 900 6 Colorful
gradient
Ф
160
1. Place Fountains in direct sunlight for full day. This will give battery charge.
If there is a cloudy day the Fountains will not operate until the sun shines
on it again.The LED light will work at night if the battery is charged.
2. The height of the spray water will change with the change of sunlight .
3. The Led will be lighted at night and the spray height will remain constant
four hour.
4. The product has a water shortage protection function, when the solar
fountain can’
t gain enough water, the pump and LED will stop working
automatically.
5. Lifespan：≥ 10000 h.
6. Here are seven spray patterns.
1. Place Fountain in direct sunlight for a full day. This will fully charge the
battery. If there is a cloudy day the Fountain will not operate until the sun
shines on it again.The LED light will work at night if the battery is charged.
2. The height of the spray water will change with the change of sunlight.
3. If charged fully throughout the day time, the spray should stay at the
same height when sun goes down until battery depletes
4. The product has a water shortage protection function, when the solar
fountain can’t gain enough water, the pump and LED will stop working
automatically.
5. Lifespan: ≥ 10000 h
6. The spray patterns are shown below.
Make sure solar panel gains enough sunlight. Don’t cover the solar
panel with sundries or garbage.
Before rst use, immerse the fountain into water to expel any
trapped air.
If there is sufcient sunlight, but the spray has lessened, remove
the lter cotton and motor for cleaning or replacement (show in
g. 5)
●.Note
1. Before using the product, the protective film on the solar panel should
be removed to avoid affecting the normal operation of the product.
2. You can choose the nozzles according to your preferences and
environment.
3. Make sure solar panel gain enough sunlight , Don’t cover the solar
panel with sundries or garbage.
4. Make sure you have put enough water in the fountain so that the
pump can stay entirely under the water.
5. The fountain should be put into the water to exhaust the air when the
solar fountain is used for the first time.
6. when there is enough sunlight , the spray height is too low or only a
little water .please take out the filter cotton or rotor for cleaning or
replacement.(as shown in the fig.5)
The first step : remove the nozzle
The second step : remove the water pump
The third step : Take out the filter cotton or rotor
the fourth step : Clean filter cotton or rotor
The fifth step : Reassemble the fountain
●.Specifications
the solar panel without any shade so that the water pump can start
spraying water.
●.Note
●.Product features
B7
5
Nozzle
Water pump
Rotors
Front cover
Filter cotton
Size of solar
panel
(mm)
Power of
Solar panel
(W)
voltage of Solar
panel
(V)
Voltage of
Water pump
(V)
Volume of
Flow
(L/h)
Water
height
(cm)
Battery
capacity
(mAh)
The quan
tity of
LED light
The color of
LED light
375-7 120-220 30-50 900 6 Colorful
gradient
Ф
160
1. Place Fountains in direct sunlight for full day. This will give battery charge.
If there is a cloudy day the Fountains will not operate until the sun shines
on it again.The LED light will work at night if the battery is charged.
2. The height of the spray water will change with the change of sunlight .
3. The Led will be lighted at night and the spray height will remain constant
four hour.
4. The product has a water shortage protection function, when the solar
fountain can’t gain enough water, the pump and LED will stop working
automatically.
5. Lifespan：≥ 10000 h.
6. Here are seven spray patterns.
  • Page 1 1
  • Page 2 2
  • Page 3 3

Easylife Solar Colour Changing Fountain Operating instructions

Easylife
Brand
Easylife
Model
Solar Colour Changing Fountain
Type
Operating instructions
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents