Parts Of The Led Slide Viewer:
(1) Body
(2) Slide Input
(3) Film Input
(4) Magnifying Lens
(5) Slide Output
Film and Slide Viewer
INSTRUCTION MANUAL
Model No. 2805 (SV-3)
Please read carefully before use and keep for future reference
Easylife Ltd, London NW1 0JP
Support Line: 0333 030 0777
© Easylife Ltd. 2021 (Reg. No. 05221840)
For more innovative products, please visit
www.easylife.co.uk
IN2805 © 2021 Easylife Ltd
(6) Slide Output Tray
(10) Film Output
Battery Loading :
Remove the battery compartment
cover from the bottom of the Viewer.
Insert 4 “AA” size Alkaline batteries (not
included) into the compartment aligning
the polarity correctly according to the
indications. Put the battery compartment
cover to its original position.
Alternatively, supplied USB cable can also
be used to power viewer. Plug one end of
the cable into power jack
( DC 6V 500mA ) located on the
side of the viewer and connect the other
USB end to power source.
Operation:
1.
the light.
2. To view a slide, insert slide into slide
through the Magnifying Lens.
3. To remove the slide, push the slide Ejection Button to eject the slide into the Slide
Output Tray through the Slide Output.
4.
e right side of
. When viewing, adjust