Easylife Water Absorber Operating instructions

PANTONE 072 C

PANTONE 123 C

Water Absorber (pack of 2)

Model No. 7279

Please read carefully before use and keep for future reference

Easylife Ltd, London, NW1 0JP

Support Line: 0333 030 0777

For more innovative products, please visit

www.easylife.co.uk

HOW TO USE

Choose desired/affected area and place water absorber into position.

Leave in place until fully expanded, indicating that Water Absorber is full

Hang out to dry or place on a radiator until Water Absorber has shrunk down to original size.

ASSEMBLY INSTRUCTIONS / INSTRUCTIONS FOR USE:

Place Water Absorber in doorways, garages, basements or any construction project where water may be a problem. The Water Absorber can expand on

contact with water to help absorb it. When full, hang out to dry. The Water Absorber will shrink back to normal size when dry and be ready use again.

CARE AND CLEANING INSTRUCTIONS:

• Spot clean with damp towel and light soap.

• Hang up to dry in-between uses.

TECHNICAL SPECIFICATION

Weight: 150g Materials: 100% Polyetser Inner contents: Montmorillonite + SAP Measurements: L91x W11xH1 cm