United UHF-879C Operating instructions

Brand: United

Model: UHF-879C

Type: Operating instructions

United UHF-879C is a PTC Ceramic Fan Heater designed for well insulated spaces or occasional use. With an adjustable thermostat and oscillation function, you can customize the heating and airflow to your liking, ensuring a comfortable indoor temperature. The overheat and tip-over protection features provide peace of mind, automatically shutting off the heater in case of excessive heat or if it's knocked over. The heater also offers multiple heating settings, including cool air ventilation, low heat, and high heat, allowing you to choose the most suitable option for your needs.

PTC Ceramic Fan Heater

MODEL: UHF-879C

USER INSTRUCTIONS

This product is only suitable for well insulated spaces or occasional use.

PLEASE READ AND SAVE THESE IMPORTANT INSTRUCTIONS FOR FURTHER

REFERENCE.

Safety Warnings

1. This product is only intended for household use.

2. Connect the appliance to a single-phase AC supply of the voltage specified on the

rating plate.

3. WARNING: In order to avoid overheating, do not cover the heater.

4. Always turn the product to the off position and unplug it from the electrical

outlet when not in use.

5. Extreme caution is necessary when any heater is near children, invalids or elderly

persons.

6. The heater must not be located immediately below an electrical socket-outlet.

7. Do not run the cord under carpeting and do not cover it with throw rugs, or the

like. Arrange the cord away from traffic area and where it will not be tripped over.

8. Do not operate the heater with a damaged cord or plug, or after the heater

malfunctions, has been dropped, or damaged in any manner.

9. If the supply cord is damaged, it must be replaced by the manufacturer, its

service agent or a similarly qualified person in order to avoid a hazard.

10. Avoid the use of an extension cord as this may overheat and cause a risk of fire.

11. Use the heater in a well-ventilated area. Do not insert or allow objects to enter

any ventilation or exhaust opening. To prevent a possible fire, do not block air

intakes or exhaust openings in any manner. Do not use on soft surfaces, like a bed,

where openings may become blocked. Use the heater on flat, dry surfaces only.

12. Do not place this heater near flammable materials, surfaces or substances, as

there may be a risk of fire. Keep the above flammable materials, surfaces or

substances at least 1m from the front of the product and keep them away from

the sides and rear.

13. Do not use the heater in any areas where petrol, paint or other flammable liquids

are stored e.g. garages or workshops as a hot, arcing or sparking parts inside the

heater.

14. Do not use this heater in the immediate surrounding of a bath, a shower or a

swimming pool. Never locate the heater where it may fall into a bathtub or other

water container.

15. This heater is hot when in use. To avoid burns and personal injury, do not let bare

skin touch hot surface. If provided, use the handle when moving the product.

16. Be sure that no other appliances are in use on the same electrical circuit, your

product’s overload can occur.

17. Children of less than 3 years should be kept away unless continuously supervised.

Children aged from 3 years and less than 8 years shall only switch on/off the

appliance provided that it has been placed or installed in its intended normal

operating position and they have been given supervision or instruction

concerning use of the appliance in a safe way and understand the hazards

involved. Children aged from 3 years and less than 8 years shall not plug in,

regulate and clean the appliance or perform user maintenance.

18. This appliance can be used by children aged from 8 years and above and persons

with reduced physical, sensory or mental capabilities or lack of experience and

knowledge if they have been given supervision or instruction concerning use of

the appliance in a safe way and understand the hazards involved.

19. Children shall not play with the appliance.

20. Cleaning and user maintenance shall not be made by children without

supervision.

21. Some parts of this product can become very hot and cause burns. Particular

attention has to be given where children and vulnerable people are present.

Description

A- Power switch

B- Oscillation Button

C- Indication light

D- Adjustable thermostat

E- Oscillation base

Operating Instructions

1) Before using the heater make sure that it is on a flat and stable surface. Damage

may occur if it is placed on an incline or decline.

2) Turn the thermostat in a clockwise direction until it reaches the maximum setting

Max “+”.

3) Cool air (ventilation only): turn the power knob to setting ventilation “ ”.

4) Heating at reduced power: turn the power knob to setting low “ ”.

5) Heating at full power: turn the knob to setting high “ ”.

6) Switching off: turn the knob to setting “ ”.

OSCILLATION FUNCTION

To use this function, push once the oscillating button and the oscillation function is

ON, the heater will oscillate to reach from left to right, push the button for a second

time and the function is OFF.

REGULATING THE THERMOSTAT

When the room has reached the required temperature turn the right thermostat

knob in an anti-clockwise direction up to the point where the appliance switches off.

The temperature fixed in this way, will be automatically regulated and kept at a

constant level by the thermostat.

Overheat Protection

This heater is protected with an overheat protection that switches off the appliance

automatically in case of severe overheating. In this case, unplug the appliance, wait

for about 30 minutes for it to cool down and remove any possible cause of

overheating, e.g. something covering the heater. Check for damage to the appliance,

the cord and the plug. If there is no damage, plug the unit back in and switch it on as

described above. If the heater still does not turn on, please contact Customer Service

for assistance.

Safety Control (Tip over switch)

This product has a tip over switch in case the product is fallen down. Because of the

function of tip over switch, it will stop working automatically, and when the product

is put to the right upside position, it will start working as normal again.

Maintenance

1. Always remove the plug from the socket-outlet and allow the heater to cool

down before clean it.

2. Wipe the exterior surface of the heater occasionally with a soft damp cloth

(not dripping wet) and dry the exterior surface before operating the heater.

WARNING:

DO not immerse the heater in water.

DO not use any cleaning chemicals such as detergents and abrasives.

DO not allow the interior to get wet as this could create a hazard.

3. To store away the heater, put it back into its original package and store it in a

clean and dry place.

4. In case of malfunction or doubt, do not try to repair the heater by yourself, it

may result in a fire hazard or electric shock.

Model No: UHF-879C

Item

Symbol

Value

Unit

Item

Unit

Heat output

Type of heat input, for electric storage local

space heaters only (select one)

Nominal heat output

nom

1.8

manual heat charge control, with

integrated thermostat

Minimum heat

output (indicative)

min

1.0

manual heat charge control with room

and/or outdoor temperature feedback

Maximum

continuous heat

output

max,c

1.8

electronic heat charge control with room

and/or outdoor temperature feedback

Auxiliary electricity consumption

fan assisted heat output

At nominal heat

output

max

N/A

Type of heat output/room temperature control

(select one)

At minimum heat

output

min

N/A

single stage heat output and no room

temperature control

In standby mode

Two or more manual stages, no room

temperature control

with mechanic thermostat room

temperature control

Yes

with electronic room temperature control

electronic room temperature control plus

day timer

electronic room temperature control plus

week timer

Other control options (multiple selections

possible)

room temperature control, with presence

detection

room temperature control, with open

window detection

with distance control option

with adaptive start control

with working time limitation

with black bulb sensor

Contact details

KALLIOPI KARYDA & CO LP

87A, 17is Noemvriou Str., PC 55535

Pylea, Thessaloniki, Greece

Tel: +302316006600, Fax: +3023160066500

NOTICE ABOUT RECYCLING

Your product is designed and manufactured with high quality materials and

components which can be recycled and reused.

This symbol means that electrical and electronic equipment, at their

end-of-life, should be disposed of separately from your household waste.

Please dispose of this equipment at your local community waste collection/recycling

centre. In the European Union there are separate collection systems for used

electrical and electronic products.

Please help us to conserve the environment we live in!

DECLARATION OF CONFORMITY

Herewith, Kalliopi Karyda & Co LP states that this product, complies with the

requirements of below directives:

EMC-Directive: 14 / 30 / EU

Low Voltage Directive: 14/ 35 / EU

ErP Directive 09 / 125 / EC

CE Marking: 93 / 68 / EEC & 15 / 863 / EU

RoHS Directive: 11 / 65 / EU

The detailed declaration of conformity can be found at www.united-electronics.gr

EXCLUSIVE IMPORTER IN GREECE:

Kalliopi Karyda & Co LP

87A, 17is Noemvriou str, P.C. 55535

Thessaloniki – Greece

T: +302316006600 | F: +302316006650

www.united-electronics.gr

United UHF-879C Operating instructions

United UHF-879C Operating instructions

United UHF-879C Operating instructions

Related papers

Other documents