Crystorama 8682-MK-WH User manual

Brand: Crystorama

Model: 8682-MK-WH

Type: User manual

How to Install

All electrical components must be

installed by a licensed electrician

in accordance with the National

Electric Code and the appropriate

local electrical codes.

ASSEMBLY INSTRUCTION MODEL #8682-MK-WH

1.Determine the position on the wall that the fixture will

be affixed.Mark two points with the same distance as

the holes on the back plate.

WARNING: This product can expose you to Lead,

which is known to the State of California to cause cancer

and/or birth defects or reproductive harm. For more

information go to www.P65Warnings.ca.gov

You will need 2-Candelabra Bulb

40 Watts Recommended 60 Watts Max

Bulb not included

USE LED BULBS FOR EXTENDED USE

This fixture is DRY rated

11.5″

6″

5.5″

24.5″

6″

5″

9.5″

15″

5″

2.Drill two holes in the wall at the points marked in Step 1

and insert the anchors into the holes.Attach the

mounting plate onto the wall using the anchor screws.

3.Attach the Back Plate onto the mounting plate.

5.Install the recommended bulbs (not included).

4.Install the chain to the bottom of the junction box.

Part Number

Part Numbers

PART NUMBER MODEL #8682-MK-WH

A.Mounting Hardware

(1)Mounting Plate

(2)Wire Nut

(2)Anchor Screws

(4)Screws

A B

B.(1)Back plate;5″x5″x0.9″h;XMO8682MKBKP5IN

C.(2)Socket

D.(1)Metal Shade;11.5″x5.5″x6″h;XMO8682MKSHA6IN

E.(1)Chain;20.7″Lx8.0mmT;XMO8682MKCHA8.0MM

Crystorama 8682-MK-WH User manual

Crystorama 8682-MK-WH User manual

Crystorama 8682-MK-WH User manual

Related papers

Other documents