Leviton ODD10-IDx Operating instructions

Leviton
Brand
Leviton
Model
ODD10-IDx
Type
Operating instructions

Leviton ODD10-IDx is a smart wallbox sensor that provides advanced sensing and dimming control for commercial applications. With its 1,100 sq ft coverage and 180° field of view, it's ideal for offices, meeting rooms, and lobbies. It features occupancy/vacancy sensing, dimming or switching control, partial-ON and partial-OFF, daylighting hold-OFF, and receptacle control. The ODD10-IDx meets national and local energy codes, including IECC, ASHRAE 90.1, and 2019 Title 24, Part 6. It's easy to set up and use, making it a great choice for contractors, specifiers, and distributors.

Leviton ODD10-IDx is a smart wallbox sensor that provides advanced sensing and dimming control for commercial applications. With its 1,100 sq ft coverage and 180° field of view, it's ideal for offices, meeting rooms, and lobbies. It features occupancy/vacancy sensing, dimming or switching control, partial-ON and partial-OFF, daylighting hold-OFF, and receptacle control. The ODD10-IDx meets national and local energy codes, including IECC, ASHRAE 90.1, and 2019 Title 24, Part 6. It's easy to set up and use, making it a great choice for contractors, specifiers, and distributors.

Elevate Your Sensing Control Options
Occupancy/Vacancy Sensing | Dimming or Switching Control | Partial-ON and Partial-OFF
Smart Wallbox Sensors
Target Applications
• Spaces less than 1,100 SF
• Oces
• Meeting rooms
• Lobbies
Leviton
Legrand/
WattStopper Lutron
Sensor
Switch/
Acuity Hubbell
ODD10-IDx PW311 MS-Z101 WSX D LightHawk
LHDMIRS
ODD24-IDW - - - LightHawk
LHDMIRS
ODP10-I1x PW-101D MS-
CL-OP153M - -
ODS15-IDx
ODS15-GDx PW301 OPS6M2U-DV WSX LightHawk
LHDMIRS
Smart Wallbox Sensors Cross Reference
Distributors Contractors Specifiers
Key
Benefits
• More
standard
features
• Fewer SKUs
to meet
multiple
applications
• Commercial
grade
quality
• Easy
setup and
customer
hando
• Meets
national and
local energy
codes
• Easy to
specify
Key Benefits
Commercial Devices Required
in Non-Residential Applications
Ensure high quality installations and reduce callbacks
by using the right sensors in the right applications.
Install commercial grade sensors in commercial
applications.
• Non-residential energy code compliance for
IECC, ASHRAE 90.1, and 2019 Title 24, Part 6
• Occupancy (auto-ON/auto-OFF) and vacancy
(manual-ON/auto-OFF) operation
• Timeouts for auto-OFF requirements
• Partial-ON, partial-OFF (dimming models only)
• Daylighting hold-OFF
• Receptacle control
• Higher input voltage and ratings to meet
commercial requirements
• Antimicrobial models support cleaning protocols
in commercial spaces
Smart Wallbox Sensors provide a simple sensing
and dimming or switching control solution for
energy savings, local control, and code compliance.
Packed with features and a variety of configuration
options, Smart Wallbox Sensors make it easy to
meet the unique lighting control needs of multiple
commercial applications with just a few models.
Commercial grade features include partial-ON,
partial-OFF, daylighting hold-OFF, and receptacle
control.
Leviton Manufacturing Co., Inc. Global Headquarters
201 North Service Road, Melville, NY 11747 tel 800-323-8920 tech line (8:30AM-7:30PM ET Mon-Fri) 800-824-3005
Visit our website at: www.leviton.com/smartsensors
©2021 Leviton Manufacturing Co. Inc. All rights reserved. Subject to change without notice. LES-G-10593B/L21-cds
REV DEC 2021
Commercial Grade Residential Grade
ODD10-IDx ODD24-IDW ODP10-I1x
ODS15-IDx/
ODS15-GDx/
ODS15-I1x DOS02/DVS02 DOS05/DVS05
Input Voltage 120-277 VAC,
50/60Hz 12-24 VDC 120 VAC,
60Hz
120-277 VAC,
50/60Hz
(ODS15-IDx,
ODS15-GDx)
120 VAC, 60Hz
(ODS15-I1x)
120 V
Ratings
0-10V Dimming;
General Purpose:
10A
LED: 8A
0-10V Dimming;
Requires use of
Power Pack for
switching loads,
ratings based
on Power Pack
Phase Cut Dimming
LED, CFL,
Electronic Ballast:
1000W
ON/OFF Switching
General Purpose:
20A
LED: 10A
150W LED
250W Inc
300W LED
600W Inc
1/4 HP
Coverage + FOV 1,100 sq ft, 180° field-of-view 900 sq ft, 180° field-of-view
Applications Non-residential and commercial spaces up to 1,100 sq ft
including oces, meeting rooms, lobbies
Residential spaces
including bedrooms,
bathrooms, laundry
rooms, closets,
pantry, mud rooms
Residential spaces
including bathrooms,
garages, basements,
stairways, motor
loads, hallways,
larger rooms
Energy Codes IECC, ASHRAE 90.1, and 2019 Title 24, Part 6
occupancy/vacancy sensing and dimming requirements
2019 Title 24, Part 6
vacancy control device requirements
Timeouts 30 sec to 60 min, Partial-OFF (30s-Always ON) 30 sec to 60 min 1 min to 20 min
Sensitivity 25% to 100% 50%, 75%, 100%
App-configurable Yes -
Partial-ON,
Partial-OFF Yes - -
Daylighting
Hold-OFF Yes, enable w/App Yes (occupancy only)
Receptacle
Control Yes w/Power Pack and Controlled Receptacles -
Multi-Way Yes, up to 5 devices Yes, up to 3 devices
Antimicrobial Yes - - Yes -
Nightlight Yes w/Selectable Colors, enable w/App -
Security Password
Protected Yes, enable w/App -
Pushbutton
Configuration Yes w/8 Common Room Settings Yes
Integrated
Photocell Yes Yes (occupancy only)
Default Mode Yes Yes
Tamper-Resistant
PIR Lens Yes Yes
Selectable
Operating Modes Yes Yes
  • Page 1 1
  • Page 2 2

Leviton ODD10-IDx Operating instructions

Leviton
Brand
Leviton
Model
ODD10-IDx
Type
Operating instructions

Leviton ODD10-IDx is a smart wallbox sensor that provides advanced sensing and dimming control for commercial applications. With its 1,100 sq ft coverage and 180° field of view, it's ideal for offices, meeting rooms, and lobbies. It features occupancy/vacancy sensing, dimming or switching control, partial-ON and partial-OFF, daylighting hold-OFF, and receptacle control. The ODD10-IDx meets national and local energy codes, including IECC, ASHRAE 90.1, and 2019 Title 24, Part 6. It's easy to set up and use, making it a great choice for contractors, specifiers, and distributors.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents